I'm running Redhat ES 3.0,
Running Squid Stable 2.5 ver 3 that comes with the Redhat ES 3.0
The issue I have is that squid will stop dead,
Do a squid status and it shows
squid dead but pid file exists
squid: ERROR Could not send signal 0 to process 5530: (3) No such process,
Have seen this bef
I'm running Redhat ES 3.0,
Running Squid Stable 2.5 ver 3 that comes with the Redhat ES 3.0
The issue I have is that squid will stop dead,
Do a squid status and it shows
squid dead but pid file exists
squid: ERROR Could not send signal 0 to process 5530: (3) No such process,
Have seen this bef
Move all the cache files and log files to a mount point with 20 gig, The Drive
is not full and I turned debug on in squid.conf just recently, Waiting for it
to fail again. When it does, I'll look for the debug file.
__
|
> On 8/23/05, John R. Van Lanen, Network Operations - TCCSA
> <[EMAIL PROTECTED]> wrote:
> > I'm running Redhat ES 3.0,
> >
> > Running Squid Stable 2.5 ver 3 that comes with the Redhat ES 3.0
> >
> > The issue I have is that squid will st
Me again, sorry,
my squid dies, when it does the cache.log most always shows the same last entry
of
Store rebuilding is 4.4% (or some other number) complete
Then nothing, The Squid status shows
squid dead but pid file exists,
Does anyone know in ES 3 if there is a problem with processes just
05/08/22 09:11:27| Beginning Validation Procedure
> > 2005/08/22 09:11:27| Completed Validation Procedure
> > 2005/08/22 09:11:27| Validated 115459 Entries
> > 2005/08/22 09:11:27| store_swap_size = 1548892k
> > 2005/08/22 09:11:27| storeLateRelease: released
t; From: John R. Van Lanen, Network Operations - TCCSA
> [mailto:[EMAIL PROTECTED]
> Sent: Monday, August 29, 2005 5:12 PM
> To: squid-users@squid-cache.org
> Cc: [EMAIL PROTECTED]
> Subject: [squid-users] dead squid, Still looking,
> Me again, sorry,
> my squid dies, when it
> > -Original Message-----
> > From: John R. Van Lanen, Network Operations - TCCSA
> > [mailto:[EMAIL PROTECTED]
> > Sent: Monday, August 29, 2005 5:12 PM
> > To: squid-users@squid-cache.org
> > Cc: [EMAIL PROTECTED]
> > Subject: [squid-users] dead sq
ing only 512 MB , earlier I was using 700 MB. My total memory
> in server is 2 gig
> Thanks - lk
> -Original Message-----
> From: John R. Van Lanen, Network Operations - TCCSA
> [mailto:[EMAIL PROTECTED]
> Sent: Monday, August 29, 2005 8:43 PM
> To: Lokesh Khanna
> C
caching again?
> -Original Message-----
> From: John R. Van Lanen, Network Operations - TCCSA
> [mailto:[EMAIL PROTECTED]
> Sent: Monday, August 29, 2005 8:29 PM
> To: [EMAIL PROTECTED]
> Cc: squid-users@squid-cache.org; [EMAIL PROTECTED]
> Subject: Re: [squid-users] dead sq
p;1
> Tim Rainier
> Information Services, Kalsec, INC
> "John R. Van Lanen, Network Operations - TCCSA" <[EMAIL PROTECTED]>
> 08/29/2005 03:29 PM
> To
> [EMAIL PROTECTED]
> cc
> squid-users@squid-cache.org, [EMAIL PROTECTED]
> Subject
> Re: [squ
Again, attaching an strace session to
> squid might illustrate exactly why it's dying.
> Also, how does the "-C" parameter affect squid?
> Tim Rainier
> Information Services, Kalsec, INC
> [EMAIL PROTECTED]
> "John R. Van Lanen, Network Operations - TCCSA&quo
> John R. Van Lanen, Network Operations - TCCSA said:
> > Done that too. Allowed squid -z to rebuild and it will still die with in
> > hours.
> Did you delete everything before running 'squid -z', including the
> cache_swap.log?
> Another reason might be hardw
ounty Computer Services Association (TCCSA) Fax: (330) 264-5703|
| "Do not meddle in the affairs of dragons, E-mail:[EMAIL PROTECTED]|
| because you are crunchy and taste good with ketchup" |
--
> On Wednesday 24 August 2005 16:00, John R. Van Lanen, Network
>
ot;-C" parameter affect squid?
> Tim Rainier
> Information Services, Kalsec, INC
> [EMAIL PROTECTED]
> "John R. Van Lanen, Network Operations - TCCSA" <[EMAIL PROTECTED]>
> 08/29/2005 04:18 PM
> To
> [EMAIL PROTECTED]
> cc
> [EMAIL PROTECTED], [E
> On 8/30/05, Rogerio Ingegneri <[EMAIL PROTECTED]> wrote:
> > >Hello all,
> >
> > >I Have 2 apache 2.0 servers and 2 Jboss servers, I am
> > >trying to install squid using port 80 and apache on
> > >port 81, my load balancer send the request only on
> > >port 80, wich would be 80 on squid but it d
Damian, What you could do is setup two networks, one in a trusted zone the
other is not, All your users go into the untrusted zone. Your Proxy sits in the
trusted zone and reach out to the internet. The users in the untrusted zone
can only get to the proxy. The proxy is the only one with a right
08/22 09:11:25| WCCP Disabled.
> > > > 2005/08/22 09:11:25| Ready to serve requests.
> > > > 2005/08/22 09:11:25| Store rebuilding is 3.5% complete
> > > > 2005/08/22 09:11:27| Done reading /usr/squid swaplog (116757
> > entries)
> > > > 2005/08/22
If you do a squid status after it dies, what does it show?
> Greetings List,
> I have just rebuilt our squid system (RHEL ES 3) and now Squid (Squid
> Cache: Version 2.5.STABLE3) dies many times every day.
> I have searched through cache.log and /var/log/messages and haven't
> really come up wit
What version of Smartfilter are you using, have noticed issues with our
installation of Smartfilter Bess Edition 4.0 that sometimes does not place a
block on the site. I have a ticket open with securecomputing.
__
| John
How many users are you serving?
John (et al),
I have increased the redirectors to 60 from 40 and that seems to have
stopped bypassing of the filter for now and I also have not seen links
returning the wrong address as of yet as well but they do admit it is a
problem. I was actually using th
I had to re-install my RHL ES3 servers again, actually twice. The software I
wish to use looks for squid installed as an RPM to the server. Since I already
know that the squid rpm install from RHL is buggy, I want install this and then
immediately upgrade to 2.5Stable11, Is it possible to upgrade
> Hello, after all my SO is Fedora Core 3, and my Squid stable version is
> Version 2.5.STABLE11
> I have a problem in running squid. The squid dies by itself. The 'squid'
> status is as follows
> Squid dead but pid file exists
> Squid ERROR: Could not send signal 0 to process (n) no such pro
of many bugs that were published in RedHat.
> But they are a lot, and is difficult discover wich one it cause the problem.
> If you want I can show you a list of all rpm that I made Updates.
> -Mensaje original-
> De: John R. Van Lanen, Network Operations - TCCSA
> [mailto:[EM
24 matches
Mail list logo