Hi
Does sslBump Decrypt the https sites normally? or it just make CONNECT
request as GET requests.
What are the advantages of using sslBump?
Regards
senthil
Hi
I have setup squid +tproxy in bridge mode.The bridge works fine for the
clients in the same subnet.
If we connect clients in different subnet the requests gets to the squid
and the squid cannot reply.Each subnet has different gateway
Internet-router--squid(bridge)-Router---
Hi
Is there any possibility to pass urlpath rewritten urls to particular
cache_peer in reverse proxy
The urlpath rewritten is done using perl script .only path in url is re
written
Three identical web servers are running at different ip and the url path
is rewritten for some requests only
l requests that are not needed url rewrite are to be passed to
172.16.1.49 web server or 172.16.1.50 web server.
Eg: the url request is squid.example.com which does not need url rewrite
Regards
senthil
Henrik Nordström wrote:
mån 2010-08-02 klockan 15:45 +0530 skrev senthilkumaar2021:
Hi All
Hi All,
I am using squid as reverse proxy.i have three identical web
servers.(content in each web server is same)
the ip's are 172.16.1.48,172.16.1.49,172.16.1.50
I used url rewrite perl script to redirect requests from
other.example.com to redirect as squid.example.com.
If i a request comes
Thank you very much
So enabling client and server persistent connections does not perform
maintaining connection to particular cache_peer is it so?
Regards
senthil
Amos Jeffries wrote:
senthilkumaar2021 wrote:
Hi All,
I want to setup a reverse proxy for a web server.There are two web
Hi All,
I want to setup a reverse proxy for a web server.There are two web
servers which has the same content.
cache_peer parent 172.16.1.48 80 0 origin-server
cache_peer parent 172.16.1.49 80 0 origin-server
When client requests a web page if the server 172.16.1.49 serves the
first request i
Thank you very much
Just by changing the assignment method,forwarding method,return method
in squid.conf *L2+Mask worked perfectly *with No tunnel.
Regards
senthil
Amos Jeffries wrote:
senthilkumaar2021 wrote:
Hi,
We are running Squid Tproxy with wccp .For wccp we had used GRE+HASH
Hi,
We are running Squid Tproxy with wccp .For wccp we had used GRE+HASH
assignment.
Squid Has been running fine.But the load on router is high.So we plan to
Use L2 Redirect with mask assignment.
We have established gre tunnel with router identifier.In order to change
GRE to L2 assignment.It i
Thank you very much
Matus UHLAR
and Henrik
Henrik K wrote:
On Thu, Jun 24, 2010 at 08:39:07AM +0200, Matus UHLAR - fantomas wrote:
On 24.06.10 10:05, senthilkumaar2021 wrote:
In order to use Anti virus scanning with Squid proxy which one is
suitable whether C-ICAP with ClamAV or
Hi
Could any one explain how tproxy works and how requested is processed
with an example.
Thanks and regards
senthilkumar
Hi
In order to use Anti virus scanning with Squid proxy which one is
suitable whether C-ICAP with ClamAV or HAVP with ClamAv.We are having
request rate around 300-350 re/sec.Which one will handle more requests
with ease?We have made some basic tests and it seems c-icap will handle
more reques
f/eth0/send_redirects
We suspect the problem was not in squid and it is related to net filter.
Regards
senthil
Amos Jeffries wrote:
On Tue, 15 Jun 2010 13:37:48 -0500, Luis Daniel Lucio Quiroz
wrote:
Le mardi 25 mai 2010 23:21:39, senthilkumaar2021 a écrit :
Hi,
Squid + Tproxy + Br
Hi,
Squid + Tproxy + Bridge Setup on latest kernel - version 2.6.34
I had followed all the steps that had given in the
http://wiki.squid-cache.org/Features/Tproxy4
Kernel - 2.6.34
iptable - 1.4.8
ebtable - 2.0.9-1
But clients were unable to browse and no errors in cache.log. Error -
Network Un
Hi
I am getting the following kernel panic error in kernel 2.6.30.5 while
running the squid t proxy in bridge mode
I have used the following iptables and ebtables rules
The panic occurs once in 10 -15 hrs
iptable and ebtables are
iptables -t mangle -N DIVERT
iptables -t mangle -A DIVERT -j
Hi.
I am using squid 2.7stable 6 as tproxy in bridge mode with the help of
tpxoxy 4 patch
It was working fine with kernel 2.6.30 and i upgraded kernel to 2.6.33
I found that ebtables and iptables not redirecting request to the squid
I have compiled kernel with tproxy support
Did any one tri
Hi,
Operating system is 64 bit.I tried kernel 2.6.28.5 and 2.6.30.5 .The
squid is running fine from morning till evening but during peak hours it
is causing kernel panic .I actually dono reason why this happens i tried
all possible ways. let me know your problem in detail so that it can
help
I also also using squid 2.7stable 6 on 64 bit but it causing kernel panic
regards
senthil
sameer khan wrote:
hello ppl;
is there a special way of compiling 64 squid; i dont see any configure options for 64bit compile.
i have compiled it but it seems it is possibly causing kernel panic.
i
Hi All,
I have installed squid2.7 stable 6 version of squid with tproxy4 patch
and using squid in bridge mode.
The tproxy is working well and i followed document as per wiki squid
My connection is about 100 Mbps and i receiving 400 re/sec and during
peak hours it may increase upto 500
My s
configuration to
be made in our network other than squid
Regards
senthil
Amos Jeffries wrote:
On Thu, 08 Apr 2010 08:49:07 +0530, senthilkumaar2021
wrote:
Hi
What is the use of multicast option in squid ?
How to configure squid to multicast messages and receive multicast
messages?
In
Hi
What is the use of multicast option in squid ?
How to configure squid to multicast messages and receive multicast
messages?
In order to configure multicast whether any configuration is needed in
other than squid
Regards
senthil
Hi
Consider a situation where many squid are running and it is necessary to
establish caching hierarchy among all squid servers.
If parent sibling cache_peer option is used it is necessary to define
all squid server in cache_peer option of all running squid servers.
whether it is possible
Hi All,
I tried to configure squirm with squid to redirect address
I am getting the following error in the cache.log and not able to browse
any sites
2010/03/29 18:29:06| helperHandleRead: unexpected reply on channel -1
from url_rewriter #1 ''
My squid.conf look like this
url_rewrite_progr
Hi All,
I am using squid2.7stable6 and my clients are windows machines.
I want to make squid to authenticate to two different active directory
servers whether it is possible.
I am having different security groups in each active directory and i
want to block websites on the basis of groups.
whi
Hi All,
I am using squid 2.7 stable7 and i configured ntlm authentication to
authenticate against active directory
I followed steps as in wiki squid
The squid.conf is as follows
auth_param basic program /usr/bin/ntlm_auth
--helper-protocol=squid-2.5-basic
auth_param basic children 5
auth_para
Hi All,
I have configured squid+wccp+Tproxy i followed the document as in squid
cache i.e., in the following
http://wiki.squid-cache.org/Features/Tproxy4
I have tested wccp with transparent proxy it was working fine
But when using wccp with Tproxy the request can be seen in access log
but no b
Thank you very much
In http://c-icap.sourceforge.net/install.html i am not able to find more
explanation
Kindy help me
Henrik Nordström wrote:
mån 2010-03-15 klockan 15:08 +0530 skrev senthilkumaar2021:
Squid got an invalid ICAP OPTIONS response from service
icap://127.0.0.1:1344
Hi All,
I have installed Icap +Clam AV with squid squid3.0 stable24
I followed documentation in
http://wiki.squid-cache.org/Features/ICAP
I am getting following error in cache.log
Squid got an invalid ICAP OPTIONS response from service
icap://127.0.0.1:1344/response; error: unsupported status
Hi All
We are using squid + Tproxy in Bridging mode .Is there any possibility
to bypass traffic when squid stops or if the squid unable to handle
request.We are using bridge since we can't able to configure tproxy with
wccp .Kindly do me needful
Thanks and Regards
Hi All
Thank u very much for the reply
Amos Jeffries wrote:
On Thu, 4 Mar 2010 12:48:56 +1100, "Michael Bowe"
wrote:
-Original Message-
From: Michael Bowe [mailto:mb...@pipeline.com.au]
From: senthilkumaar2021 [mailto:senthilkumaar2...
Hi all
can any one tell me the differnce between the following authentications
1.kerberos authentication
2.Ntlm
3.Windows Active directory
Thank you
Reagrds
senthil
Hi All,
I have configured samba to authenticate one domain controller when we
reboot one domain controller all users losing to authenticate.We have
two more domain controllers whether we can make squid to authenticate
with these additional domain controllers also. what are the steps have
to b
Hi All,
I need to configure squid +Tproxy+ wccp
I followed the document as if in the squid cache
wccp2_router $ROUTERIP
wccp2_forwarding_method gre
wccp2_return_method gre
wccp2_service dynamic 80
wccp2_service dynamic 90
wccp2_service_info 80 protocol=tcp flags=dst_ip_hash priority=240 ports=80
Hi All
I configured ntlm authentication in squid using samba server as a medium
connect to active directory.
When we open browser squid asks for a password it authenticates when i
give user name and password
and when i give domainame/username password means it does not authenticate
I am using
Amos Jeffries wrote:
senthilkumaar2021 wrote:
Hi All,
When i compile squid 3.0 stable 4 i getting the following error
logfile.cc: In function ‘Logfile* logfileOpen(const char*, size_t,
int)’:
logfile.cc:105: error: invalid conversion from ‘const char*’ to ‘char*’
logfile.cc:108: error
Hi All,
When i compile squid 3.0 stable 4 i getting the following error
logfile.cc: In function ‘Logfile* logfileOpen(const char*, size_t, int)’:
logfile.cc:105: error: invalid conversion from ‘const char*’ to ‘char*’
logfile.cc:108: error: invalid conversion from ‘const char*’ to ‘char*’
make[3
36 matches
Mail list logo