Masood Ahmad Shah wrote:
my dear your all configuration are fine. but I'm sure you have problem in
your module check is your module loaded..
lsmod |grep wccp
let us know yes or no?
# lsmod |grep wccp
ip_wccp 1752 0 (unused)
Did you try "no ip route-cache" on the 7200 FastEthernet Interface (the
interface wich sends/receives wccp GRE packets to/from your Squid box.
Val
==
Valentin S. Chopov, CC[ND]P
Sys/Net Admin
SEI Data Inc.
E-Mail: [EMAIL PROTECTED]
==
Henrik Nordstrom wrote:
On Monday 04 August 2003 07.52, Larry M. Smith wrote:
I am trying to set up Squid 2.5-STABLE3 as a transparent proxy with
a Cisco 7204 VXR (running IOS 12.2(6))and am running across a
maddening problem - works in test network, doesn't work in
production network.
will show
Damian-Grint Philip wrote:
I had similar symtoms - working fine on one 3620 but blocking on another,
even when I clamped path MTU down to 576... I eventually used a route map "
set df 0" for returning traffic which sorted the problem - I think there
may be a Cisco implementation bug...
See this ur
On Monday 04 August 2003 10.05, Masood Ahmad Shah wrote:
> Respected Henrik,
> If he is running WCCP then I think no need to block cache proxy
> traffic from router for intercepting... because Cisco router does
> not redirect wccp packets to cache that is in WCCP table.
I's say if enabling/disabli
very simple, but it takes a genius to understand the simplicity.
(Dennis Ritchie)
- Original Message -
From: "Henrik Nordstrom" <[EMAIL PROTECTED]>
To: "Larry M. Smith" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Monday, August 04, 2003 12:53 PM
stand the simplicity.
(Dennis Ritchie)
- Original Message -
From: "Damian-Grint Philip" <[EMAIL PROTECTED]>
To: "'Larry M. Smith'" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Monday, August 04, 2003 12:41 PM
Subject: RE: [squid-users
On Monday 04 August 2003 07.52, Larry M. Smith wrote:
> I am trying to set up Squid 2.5-STABLE3 as a transparent proxy with
> a Cisco 7204 VXR (running IOS 12.2(6))and am running across a
> maddening problem - works in test network, doesn't work in
> production network.
> will show the redirected
ails:
http://www.cisco.com/en/US/tech/tk827/tk369/technologies_tech_note09186a0080
093f1f.shtml
Phil DG
-Original Message-
From: Larry M. Smith [mailto:[EMAIL PROTECTED]
Sent: 04 August 2003 06:53
To: [EMAIL PROTECTED]
Subject: [squid-users] Squid, WCCP, and Loading?
I am trying to se
stand the simplicity.
(Dennis Ritchie)
- Original Message -
From: "Larry M. Smith" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 04, 2003 10:52 AM
Subject: [squid-users] Squid, WCCP, and Loading?
| I am trying to set up Squid 2.5-STABLE3 as a trans
I am trying to set up Squid 2.5-STABLE3 as a transparent proxy with a
Cisco 7204 VXR (running IOS 12.2(6))and am running across a maddening
problem - works in test network, doesn't work in production network.
I have read the FAQ as well as searched the lists. I have tried both
the ip_no_pmtu_d
11 matches
Mail list logo