Chris Robertson wrote:
Luciano Sousa wrote:
Chris,
the squid denies access yes, see below:
I shut down the computer normally yesterday evening ...
this morning when I called the computer performed the following
procedures
in a .sh file:
RunCache &
RunAccel &
squid
You are effectively st
Luciano Sousa wrote:
Chris,
the squid denies access yes, see below:
I shut down the computer normally yesterday evening ...
this morning when I called the computer performed the following procedures
in a .sh file:
RunCache &
RunAccel &
squid
You are effectively starting Squid THREE TIMES h
h for starter the squid, because if the computer is
disconnected in a way inappropriate, when it is switched on the squid will
run normally ...
how should I proceed?
-Mensagem original-
De: Chris Robertson [mailto:crobert...@gci.net]
Enviada em: quarta-feira, 15 de abril de 2009 15:16
Pa
Luciano Sousa wrote:
hello.
i'm having a problem with idiot.
at least once every two days I have to clear the cache of my squid,
because it begins to deny all access, probably because it is full ...
Your cache.log (/usr/local/squid/logs/cache.log) might give more
information on what's goin
hello.
i'm having a problem with idiot.
at least once every two days I have to clear the cache of my squid,
because it begins to deny all access, probably because it is full ...
my squid.conf
http_port 3128
icp_port 3128
hierarchy_stoplist cgi-bin ?
cache_mem 500 MB
cache_swap_low 90
cache_swap_
Amos Jeffries wrote:
George wrote:
Hi,
I've set up the following acls/outgoing_ip settings in my squid:
acl ip1 myip 1.1.1.1
tcp_outgoing_address 1.1.1.1 ip1
for each IP I have on the server. I need this to be able to use each
IP of the server as the outbound one.
The problem is that if I use
George wrote:
Hi,
I've set up the following acls/outgoing_ip settings in my squid:
acl ip1 myip 1.1.1.1
tcp_outgoing_address 1.1.1.1 ip1
for each IP I have on the server. I need this to be able to use each
IP of the server as the outbound one.
The problem is that if I use IP 1.1.1.1 then I can
Hi,
I've set up the following acls/outgoing_ip settings in my squid:
acl ip1 myip 1.1.1.1
tcp_outgoing_address 1.1.1.1 ip1
for each IP I have on the server. I need this to be able to use each
IP of the server as the outbound one.
The problem is that if I use IP 1.1.1.1 then I can't switch to IP
