Hello,
either is a failed start of kamailio that gets blocked or something else
is killing it, because the signal is 9 -- sigkill. The message from
jsonrpcs is from start up, then nothing until the signal 9.
If it is at startup, maybe if you run with debug=3 can give you more
hints about what hap
Hello,
On 13.09.18 22:02, Henning Westerholt wrote:
> Am Donnerstag, 13. September 2018, 18:23:25 CEST schrieb Aleksandar Sosic:
>> is there anyone here that has done a performance testing measurements
>> between native kamailio config file and full python kemi instance of
>> kamailio?
>>
>> I've
Hello Daniel
Think i cannot now. This is happens under fraud scan and now scan it stoped.
As workaround i check exit code of "kamcmd core.uptime". If not "0", then
force restart kamailio.
Sergey
пт, 14 сент. 2018 г. в 11:25, Daniel-Constantin Mierla :
> Hello,
>
> either is a failed start of kam
On Thu, Sep 13, 2018 at 08:19:00AM +, Nathanael Eneroth wrote:
> UA1<--->KAM1<>KAM2<>UA2
> int1int1 int3 int3
> int2 int2
>
> I would like KAM1 to forward all SIP requests destined to int3 via
> KAM2 and vice versa. I am aware of the routing logic in
> 'kam
Hi,
On Wed, 12 Sep 2018 at 20:57, Daniel W. Graham wrote:
> Yes, that output was from receiver. When using DB only and no DMQ, things
> work fine.
>
>
>
> No, I don’t have any calls to save on receiver or register handling in
> general. I was under the impression that DMQ / dmq_usrloc module han
This Medium post might also be handy:
https://medium.com/@tumalevich/kamailio-registration-replication-without-dmq-65e225f9a8a7
On Fri, Sep 14, 2018 at 1:57 PM Daniel Tryba wrote:
> On Thu, Sep 13, 2018 at 08:19:00AM +, Nathanael Eneroth wrote:
> > UA1<--->KAM1<>KAM2<>UA2
> > int1
Hello dears,
I'm using kamailio devel version as an IMS (P-CSCF,S-CSCC,I-CSCF) with forking
mode ,when more than one client registered with the same AOR and the servers
received a call to that Aor All the clients ringing , after that one of the
clients answer the call which will cause cancel m
https://kamailio.org/docs/modules/5.1.x/modules/registrar.html#registrar.p.max_contacts
On Fri, Sep 14, 2018 at 9:35 AM eyas barhouk wrote:
> Hello dears,
>
> I'm using kamailio devel version as an IMS (P-CSCF,S-CSCC,I-CSCF) with
> forking mode ,when more than one client registered with the sam
Greetings,
I have Kamailio as an SBC with mutiple IP's and I need to save some
information in the first Invite about the routing made internally in the
Kamailio.
I'm thinking about adding some parameters to Record-Route and retrieve them
in the Route header. Is this safe ? Can I be sure that thos
They will not be changed by compliance user agents. In that sense it's safe.
However, be mindful of the fact that these parameters can be intercepted or
altered by a malicious user agent, and that adding them in multiplicity
contributes to the overall size of the message.
--
Sent from mobile. A
This is actually what Daniel recommended on the last bootcamp in Berlin. If
X user is not registered here, forward to the other kamailio. Pretty nice
trick.
On Fri, Sep 14, 2018, 14:30 Gholamreza Sabery wrote:
> This Medium post might also be handy:
>
>
> https://medium.com/@tumalevich/kamailio-
Dear thanks for your response
I'm using kamilio ims_registrar-scscf module Instead of register module
So is the parameter max_contacts on thats module do the same ??
From: sr-users on behalf of Sergiu Pojoga
Sent: Friday, September 14, 2018 4:44:24 PM
To: Kamail
Hi.
Does anybody know what kamailio core maxbuffer parameter means?
And is there any conjunction with system net.core.rmem_max parameter?
Doc is obscure for me
"The size in bytes not to be exceeded during the auto-probing procedure of
descovering the maximum buffer size for receiving UDP messag
Hello guys,
is kamailio from
deb http://deb.kamailio.org/kamailio51 stretch main
deb-src http://deb.kamailio.org/kamailio51 stretch main
Installable on debain stretch?
I'm getting:
# apt-get install kamailio kamailio-xmlrpc-modules kamailio-mysql-modules
Reading package lists... Done
Bu
Greetings,
My Kamailio has 2 IP's and, as such, it will generate two Record-Routes
when the Request is relayed.
I want to add one parameter to one of the Record Routes and another
parameter to the other Record-Route. However, if i use add_rr_param() it
will automatically add the parameters to the
Am Freitag, 14. September 2018, 16:03:33 CEST schrieb eyas barhouk:
> Dear thanks for your response
> I'm using kamilio ims_registrar-scscf module Instead of register module
>
> So is the parameter max_contacts on thats module do the same ??
Hello,
it seems it does. I am not an expert for this I
Am Freitag, 14. September 2018, 16:59:23 CEST schrieb Dmitri Savolainen:
> Does anybody know what kamailio core maxbuffer parameter means?
> And is there any conjunction with system net.core.rmem_max parameter?
>
> Doc is obscure for me
> "The size in bytes not to be exceeded during the auto-pro
Hi David,
Are you sure you have your repos setup correctly?
Check https://packages.debian.org/stable/libs/libreadline7
Example direct link for amd64:
http://ftp.us.debian.org/debian/pool/main/r/readline/libreadline7_7.0-3_amd64.deb
But you should definitely be able to install via APT.
Joel.
Hello guys,
is kamailio from
deb http://deb.kamailio.org/kamailio51 stretch main
deb-src http://deb.kamailio.org/kamailio51 stretch main
Installable on debain stretch?
I'm getting:
# apt-get install kamailio kamailio-xmlrpc-modules kamailio-mysql-modules
Reading package lists... Done
Bu
Hi!
I did this tutorial: https://sonnguyen.ws/install-kamailio-debianubuntu/
When I try to start the daemon I get:
# systemctl start kamailio
Job for kamailio.service failed because the control process exited with
error code.
See "systemctl status kamailio.service" and "journalctl -xe" for detai
Hi,
As Alex mentioned, "they will not be changed by comaliance UA", But be
notice that if you want to relay your request to other network, and
these is a SBC on upstream networks, These parameters could be removed
by them, As in your Kamailio as SBC, you remove all record_route, and
add its IP as r
Let me know do you need to add all IP's of kamailio in Record_Routes ?
of course you need it when using cross-protocol forwarding.
If you needed, you should add them by re-writing headers directly,
else you could work with "enable_double_rr" parameter, to add one
Record_Route in header.
With Regard
22 matches
Mail list logo
