I would say use cgrates for this purpose with kamailio. It is especially
designed for billing stuff.
Br, Aqs.
On Fri, 24 May 2019, 10:19 pm Steve Bucklin,
wrote:
> Hello all (again),
>
> I am looking at a 'good' method to start a call with "chunks" of time
> allocated. I wish the initial call t
May be you need this.
https://www.kamailio.org/docs/modules/devel/modules/auth.html#auth.f.consume_credentials
Br, Aqs
On Sat, 18 May 2019, 7:26 pm Juha Heinanen, wrote:
> Sergiu Pojoga writes:
> >
> > Noticed BYE requests relayed from caller to callee have the
> > *Proxy-Authorization* header
y.
>
> On Mon, 17 Dec 2018, at 3:51 PM, Aqs Younas wrote:
>
> Remove append_branch().
>
> On Mon, 17 Dec 2018 at 6:08 AM, Boden Garman wrote:
>
>
> Hi list,
>
> I'm trying to play an announcement for my users when my PSTN gateway
> responds with a 404 Not Found
Remove append_branch().
On Mon, 17 Dec 2018 at 6:08 AM, Boden Garman wrote:
> Hi list,
>
> I'm trying to play an announcement for my users when my PSTN gateway
> responds with a 404 Not Found (Reason: Q.850;cause=3), indicating a wrong
> number. I'm a bit lost and would appreciate any advice.
>
It looks like a nat issue. Most probably ACK after first 200 ok is unbale
to reach callee. Check debug logs and also make sure you have defined
advertised address in kamailio and request is going through kamailio natted
route.
On Wed, 14 Nov 2018 at 1:30 PM, Mathias Brodala - Pagemachine AG <
mbro
Greetings list,
I am getting hard time to make kamailio perfectly handle cancels request.
I am using http_async_client and MSILO to handle push notifications.
Case 1. When B party record exists in location but it is off-line and I
send cancel *instantly* from Party A while kamailio is sending pus
ended, not the outgoing one.
>
> Reading back this email thread, you said:
>
> "I am resetting this flag 'T_ASYNC_SUSPENDED' before suspending the
> transaction."
>
> How do you do that? Can you list the order of operations that happen, like
> next?
&g
ut how to fix this. Cancels are handles
automatically so, i cannot hardcore anything to resolve it.
Best Regards,
Aqs Younas
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
you can check by starting your rtpengine with this parameter "--table=0".
If kernal modules is properly installed you will not face any error.
Best Regards,
Aqs Younas
On Fri, 29 Jun 2018 at 03:33, Mojtaba wrote:
> Thank you. I installed RTPEngine from git
> (https://gi
dhat/
http://hrhashmi.blogspot.com/2016/06/rtpengine-installation-on-amazon-ami.html
Br, Aqs
On Mon, 25 Jun 2018 at 14:19, Mojtaba wrote:
> Hi,
> Please share the source.list for getting the lasted version of debhelper.
> Thanks
>
> On Sat, Apr 7, 2018 at 2:45 AM, Aqs Younas wrote:
GUI focused on implementing Kamailio
> to provide SIP Trunking and PBX Hosting Services
>
> On May 18, 2018, at 12:50 AM, Aqs Younas wrote:
>
> Greetings list,
>
>
> I have kamailio server behind nat with rptproxy. But i am getting no voice
> on the call. After taking trace i
pointer/suggestion is much appreciated.
Best Regards,
Aqs Younas
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
this?
Best Regards,
Aqs Younas
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
DTLS=passive solved it.
Thanks guys.
On Tue, 10 Apr 2018, 11:37 pm Aqs Younas, wrote:
> Sometimes, I see below logs in RTP engine.
>
>
> Apr 10 17:59:21 centos-1024mb-nyc-02 rtpengine[65101]: INFO:
> [24b95195-3da3-4e12-8400-5fcf908183e5]: Received command 'answer' fro
p, 160820 b, 0 e, 60 ts
Apr 10 18:00:41 centos-1024mb-nyc-02 rtpengine[65101]: INFO:
[24b95195-3da3-4e12-8400-5fcf908183e5]: - Port 209.182.216.71:8269
<> 72.214.35.171:50108 (RTCP), SSRC 653128b4, 3 p, 278 b, 0 e, 60 ts
Any suggestion what might be happening?
Br, Aqs.
On 10 April 2018 at 22
I could see SRTP packets coming from one device but they never leave
rtpeninge.
I put a link to Pastebin containing a call trace with the hope that someone
might help me out.
I could provide more info if required.
https://pastebin.com/tYVpFQAh
Br, Aqs.
On 10 April 2018 at 01:39, Aqs Younas
uration.
ON INVITE
rtpengine_offer("replace-origin replace-session-connection ICE=remove
UDP/TLS/RTP/SAVP");
ON 200-ok
rtpengine_answer("replace-origin replace-session-connection ICE=remove
UDP/TLS/RTP/SAVP");
Best Regards,
Aqs Younas
_
be grandfathered. I think the second one.
>>
>> To everybody - please watch email addresses you're replying to.
>>
>> On Friday, April 6, 2018 6:20:16 PM EDT Aqs Younas wrote:
>> > Got this error after resolving the dependencies.
>> >
>> >
Ok thanks i will give it try on fresh install. BWT which is preferred
distro for rtpengine. Because i was not able to find debhelper > 10 in
default debian 8.10 repository.
Regards.
Aqs Younas.
On Sat, 7 Apr 2018, 3:36 am Richard Fuchs, wrote:
> On 2018-04-06 06:20 PM, Aqs Younas
d' failed
make: *** [build] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2
Any help :)
Regards,
Aqs Younas
On 7 April 2018 at 03:15, Aqs Younas wrote:
> Thanks for the answer.
>
> I had installed debhelper from Debian package but it had Version:
&g
t; DEB_BUILD_PROFILES="pkg.ngcp-rtpengine.nobcg729"’
> as stated in the readme (https://github.com/sipwise/rtpengine) and your
> issue should be fixed.
>
>
>
> BR,
>
> Henning
>
>
>
> *Von:* sr-users [mailto:sr-users-boun...@lists.kamailio.org] *Im Auftrag
> von *Aqs
Greetings list.
This might not be related to Kamailio but I thought someone would be able
to give a hand in resolving dependency during the installation of rtpengine
on Debian 8 Jessie.
It is complaining about below dependencies.
root@debian-769mb-miami-01:/usr/src/rtpengine# dpkg-buildpackage
d
Try to run 'journalctl -xn'. Most probably you will see the error there.
Make sure you have kamailio.service enable to run on reboot.
'systemctl enable kamailio.service'
Br, Aqs.
On 28 March 2018 at 17:51, Atux Atux wrote:
> i am installing Kamailio using apt in a debian 8 machine by following
Make sure you are calling force_rport.
Br, Aqs.
On 26 March 2018 at 13:57, Yuriy Gorlichenko wrote:
> Hi
> I'm using version: kamailio 5.1.2
>
> I have strange issue with auth_challenge
>
> kamialio works as NAT handler. When Register comes kamailio handles nat
> and save original ip:port at t
uthentication is engaged for everyone.
>
>
>
> On Fri, Mar 23, 2018 at 3:54 PM, Aqs Younas wrote:
>
>> Thanks Samy for replying.
>>
>> I wanted if Caller IP was not allowed it should be asked for digest
>> authentication. But above default AUTH route only
seems to be the problem ! do you want this caller to be IP
> Authenticated or Digest Authenticated or denied !?
>
>
> On Fri, Mar 23, 2018 at 6:16 AM, Aqs Younas wrote:
>
>> Greetings list.
>>
>> I can see that I was able to bypass the default route[AUTH] if I send
Greetings list.
I can see that I was able to bypass the default route[AUTH] if I send an
invite containing from_uri which is not local but requested line containing
a local user.
llisten=udp:172.16.40.10:5060
route[AUTH] {
#!ifdef WITH_AUTH
#!ifdef WITH_IPAUTH
if((!is_method("REGISTER")) && allo
fo_increase_version",
> 0)modparam("pua", "check_remote_contact", 1)modparam("pua", "fetch_rows",
> 1000)# - pua_dialoginfo params -modparam("pua_dialoginfo",
> "include_callid", 1)modparam("pua_dialoginfo", "
Are you using any pua module? If not, you need to use pua_dialog/pua_*
modules to handle presence for UAs that do not generate PUBLISH for
presence.
Best Regards,
Aqs Younas
On 11 March 2018 at 00:58, Mark Boyce wrote:
> Hi All
>
> Got a presence problem with what should be a ve
ang*" cfg
>
> Br, Rinor
>
>
> On 02/27/2018 03:04 PM, Aqs Younas wrote:
>
> Greetings list,
>
> I am trying to install Kamailio 5.1 from source code on Debian 8.10. But
> It is failing with below error. Don't know what could be wrong.
>
> Any suggestio
Greetings list,
I am trying to install Kamailio 5.1 from source code on Debian 8.10. But It
is failing with below error. Don't know what could be wrong.
Any suggestion is much appreciated. Thanks.
make --no-print-directory -C ./squirrel/squirrel SQMARCH64="-m64"
CC_EXTRA_FLAGS="-fPIC" \
This might help you.
https://github.com/caruizdiaz/cnxcc-example?files=1
On 30 Aug 2017 11:09 am, "Logeshwaran G" wrote:
> Thanks Federico! Will try it out.
>
> Thanks & Kind Regards,
> Logeshwaran G
>
> On Wed, Aug 30, 2017 at 11:34 AM, Federico Cabiddu <
> federico.cabi...@gmail.com> wrote:
>
Instead of doing this manually go for path header if your SIP SERVER
supports it.
https://www.kamailio.org/docs/modules/devel/modules/path.html
On 20 April 2017 at 19:09, Narayan P wrote:
> Thanks for your kind Response Daniel,
>
>
> Yes as you told with the requirement I have mentioned call wil
33 matches
Mail list logo