38 seconds sounds pretty close to 30 seconds. Could those 38 seconds be a
30 seconds after the actual answer packet?
If so, you might want to look at ACK and OK packets not arriving correctly
because of NAT, wrong IP selection in openser , etc...
A simple tshark might help you out to debug from
This patch seems to do the trick.
root@zs2:/var/www/siremis-3.2.0# diff -ruN
openbiz/bin/data/BizDataSql.php~ openbiz/bin/data/BizDataSql.php
--- openbiz/bin/data/BizDataSql.php~2010-09-15 15:09:29.0 +0200
+++ openbiz/bin/data/BizDataSql.php 2012-04-16 10:23:38.0 +0200
@@
Hi List!
I try to use the dispatcher module to route calls to my ivr systems.
But it didnt load the gateway. I didnt see my xlog message after the
ds_select_dst()
Any hints? Gateway is Active and Probing.
#!ifdef WITH_DISPATCHER
if (!lookup(location)) {
Hello,
i'm seeing a lot of failed memory allocations for shared memory after the
shared memory has been fully used once (see shmem:max_used_size below).
Used_size keeps increasing fast on a heavy loaded server, until it reaches the
total_size. From that moment memory allocations start failing
Hello,
On 4/16/12 12:25 PM, Karsten Horsmann wrote:
Hi List!
I try to use the dispatcher module to route calls to my ivr systems.
But it didnt load the gateway. I didnt see my xlog message after the
ds_select_dst()
Any hints? Gateway is Active and Probing.
#!ifdef WITH_DISPATCHER
if
Hello,
On 4/16/12 12:49 PM, Alex Hermann wrote:
Hello,
i'm seeing a lot of failed memory allocations for shared memory after the
shared memory has been fully used once (see shmem:max_used_size below).
Used_size keeps increasing fast on a heavy loaded server, until it reaches the
total_size.
Hello and thanks for your helping,excuse me I'm newbie in mailing list.
I have a question about implementing Kamailio with FreeSwitch.
Our plan is a configuration like this at the follow:
1.Kamailio as registering and LoadBalancer ,response to chat and
call(voice/video) in p2p
2.we have 2
Hi Daniel,
if i forward it - then it loops to itself. And the if condition tolds
me that i didnt work :(
--
Mit freundlichen Grüßen
*Karsten Horsmann*
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
Hi,
When you use forward( ) it loops itself since the dispatcher function is
not selecting a destination, and the SIP request is destined to your
server. Do you have any error in your log file?
Reda
On Mon, Apr 16, 2012 at 14:31, Karsten Horsmann khorsm...@gmail.com wrote:
Hi Carsten,
Hi Reda,
there is no error in the log file. Its hard to debug this function.
2012/4/16 Reda Aouad reda.ao...@gmail.com:
Hi,
When you use forward( ) it loops itself since the dispatcher function is not
selecting a destination, and the SIP request is destined to your server. Do
you have any
Can you try another algorithm?
Can you set debug=3 and see what's happening?
Reda
On Mon, Apr 16, 2012 at 14:54, Karsten Horsmann khorsm...@gmail.com wrote:
Hi Reda,
there is no error in the log file. Its hard to debug this function.
2012/4/16 Reda Aouad reda.ao...@gmail.com:
Hi,
Hello,
the issue was produced inside the debugger module, while printing config
trace, according to the worker process back trace.
Can you try with the patch from following commit:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=40ddcf88df9ef71bba7c182b7a1d76b559645628
But there are querys on siremis using mysql format.
pg.patch
Description: Binary data
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
Hi Reda,
my pitfall was that the probing takes 30seconds until the gateway is active
until startup. So if i test it right after kamctl restart the gateway
was inactive.
Now i seems that my working multihomed config needs some help to fix
nat for dispatching. For locatet user it works, for
Hello,
it is a change starting with 3.0.0, several MI commands were moved in
kex module, so you need to load it.
For sercmd you have to load the ctl module. kamctl requires mi_fifo module.
Cheers,
Daniel
On 4/16/12 4:53 PM, Renan Capaverde wrote:
Thanks for the reply,
I do not have kex
Thank you Davy, I ran tshark and found the following: (masked ip addresses
to protect the innocent and trimmed the logs)
8.250307 300.300.300.300 - 10.12.47.96 SIP Request: REGISTER sip:
sip.mydomain.com
8.251503 10.12.47.96 - 300.300.300.300 SIP Status: 200 OK(1
bindings)
35.942381
Interestingly enough, this was just the first time I initiated the calls,
the second time (im guessing the route was recorded).
On my second test, I just got the following: SIP/SDP Status: 200 OK, with
session description However the call still drops at around 30 seconds.
On Mon, Apr 16, 2012 at
Thank you very much, that worked.
Em 16/4/2012 12:17, Daniel-Constantin Mierla escreveu:
Hello,
it is a change starting with 3.0.0, several MI commands were moved in
kex module, so you need to load it.
For sercmd you have to load the ctl module. kamctl requires mi_fifo
module.
Cheers,
Some time ago, I had similar problem.
This was my solution:
if(is_method(INVITE)){
ds_select_dst(1,4);
$sht(forw=$ft)=$du;
sl_send_reply(100,Trying);
route(RELAY);
exit();
}
if ( is_method(ACK|BYE) ) {
if ( t_check_trans() ) {
t_relay();
exit;
} else {
if(($sht(forw=$ft))=~$td){
Hello all,
I have a script working with openser1.2.1 and I try to move them to kamailio
3.2.1
I have actually an issue with the loose_route() function at least for ACK
message.
When I get the ACK the loose_route function is changing the URI with the
value of the route header of the ACK
Thank you Stoyan
*
*
I added the routing config as you suggested but it still drops the call
after 30 seconds.
Any other suggestions?
Note: my nathelper module is commented out because I can't get it to work,
here is my mod list:
## Modules Section
#set module path
I am using nathelper and rtpproxy.
We had no serious problems with those modules.
My idea was to overwrite wrong addresses in ACK and BYE packages, because
they kept reentering kamailo, instead of being forwarded where they have to
go.
By the way - you can add:
modparam(htable, htable,
Recently, I have used TM's fr_timer() parameter to control PDD,
non-responsive gateways, etc. However, I would like to know if it is
possible to set the fr_timer(), or something similar, on a per branch
level. For example, in comparison to our US-based gateways, some of our
international
Hi Daniel. Thank you for your prompt reply.
As per your suggestion, I have decided to use the unixodbc module instead
of the Oracle module. After making that change, I am able to connect to
our database.
Thanks again,
Orlando
On Mon, Apr 9, 2012 at 07:01, Daniel-Constantin Mierla
Orlando F. Guitian writes:
Recently, I have used TM's fr_timer() parameter to control PDD,
non-responsive gateways, etc. However, I would like to know if it is
possible to set the fr_timer(), or something similar, on a per branch
level. For example, in comparison to our US-based gateways,
Well, 30 seconds seems to be the timeout of your SIP client: I suspect your
client sends a 200OK but doesn't receive the ACK for it, and hence times
out 30 seconds after and terminates the call. You can run ngrep to trace
the call and see where the ACK is routed, and if it is routed to the
correct
Hi,
the patch is to phpopenbiz framework, which is not included in siremis
git repository. But we can include the patch itself and document it, can
you add it as attachment to sourceforge tracker?
http://sourceforge.net/tracker/?atid=3020101group_id=250738func=browse
Regards,
Ramona
On
Hi,
add also this patch to the sourceforge tracker:
http://sourceforge.net/tracker/?atid=3020101group_id=250738func=browse
It will be applied to git -- few questions:
- have you tested and still works with MySQL?
- the last chunk in patch is related to xml config files - does not seem
Sorry, I am new to git. What is the git command to add the patch or can
I just download all of the updates?
Thanks
Nathaniel
On 4/16/2012 8:31 AM, Daniel-Constantin Mierla wrote:
Hello,
the issue was produced inside the debugger module, while printing
config trace, according to the worker
29 matches
Mail list logo