d...
Name: signature.asc
Type: application/pgp-signature
Size: 900 bytes
Desc: OpenPGP digital signature
URL:
<http://lists.sip-router.org/pipermail/sr-users/attachments/20120806/dbbcf8ac/attachment-0001.pgp>
--
Message: 2
Date: Mon, 06 Aug 2012 08:42:57 -0400
From:
Hello,
I am curious if there is any documentation on how AVP's processing works
in the following scenario below.
UAC 1 -> KAMAILIO -> KAMAILIO -> DEST
It seems that AVP's I set between UAC 1 -> KAMAILIO are lost once I relay
back to the same KAMAILIO proxy (self)?
Is there any documentation
Graham Wooden (personal) writes:
> Thanks for the reply Juha. I have a 3.3.0 system that I have been trying
> to get my routing logic converted over. I will keep working on that.
ok, let the list know if you experience any lcr problems with 3.3 and
we'll try to fix them.
-- juha
__
Thanks for the reply Juha. I have a 3.3.0 system that I have been trying
to get my routing logic converted over. I will keep working on that.
Thanks again,
-graham
On 8/6/12 12:12 PM, "Juha Heinanen" wrote:
>Graham Wooden (personal) writes:
>
>> What kind of debugging can I do on this gateway
Graham Wooden (personal) writes:
> What kind of debugging can I do on this gateway selection process? I am
> running 1.5.5 notls, and have approximately 425K routes. Kamailio is
> started with "-m 512" for the additional memory.
graham,
1.5.5 is quite old and lcr implementation has changed a lot
Hello,
I am noticing that some of the time (not always consistent) that load_gw()
/ next_gw() will not always return the gateway with the lowest priority
number.
For example, when I look up a route for 205595, I have three grp_ids
(gateways) that services the destination; with them being separat
Ah, you short-circuited where I was going with this. Couldn't remember the name
of the module.
Yep, Vijay. What Richard said.
-- Alex
--
Sent from my Samsung mobile, and thus lacking in the refinement one might
expect from a proper keyboard.
Alex Balashov - Principal
Evariste Systems LL
rmmod nf_conntrack_sip
2012/8/6 Alex Balashov
> Can you paste this output too?
>
> lsmod | grep -i sip
>
>
>
>
> -- Alex
>
> --
> Sent from my Samsung mobile, and thus lacking in the refinement one might
> expect from a proper keyboard.
>
> Alex Balashov - Principal
> Evariste Systems LLC
> 235
Can you paste this output too?
lsmod | grep -i sip
-- Alex
--
Sent from my Samsung mobile, and thus lacking in the refinement one might
expect from a proper keyboard.
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
Tel: +1-678-954-0670
We
On 08/06/12 06:08, Vijay Thakur wrote:
> Hi all,
>
> I have configure Kamailio 3.1.5 Server. All things are working fine.
> When i make a call from Soft phone (X-Lite) to iphone, all is working
> fine. But in other case call from iphone to Softphone is not working,
> even not ringing. During check
Thanks for prompt reply. Here is the out put if command iptables -L -n:
*Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source
For your relatively narrow, specific applications in your topology, no. You'd
be better off installing SEMS per se.
-- Alex
--
Sent from my Samsung mobile, and thus lacking in the refinement one might
expect from a proper keyboard.
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponc
You might consider pasting the actual output of: iptables -L -n
This lists the actual rules straight from netfilter at runtime. I wouldn't
worry too much about what some distro-specific config file or script says. Real
truth comes from iptables itself.
-- Alex
--
Sent from my Samsung mobil
The short answer to your latter question is: yes. Cisco media and PSTN gateways
have never hairpinned SIP-to-SIP calls well, even when officially supported.
Asterisk has a lower learning curve due to the abundance of information and
tutorials, but SEMS would make more sense, since all you need
Hi all,
I have configure Kamailio 3.1.5 Server. All things are working fine.
When i make a call from Soft phone (X-Lite) to iphone, all is working
fine. But in other case call from iphone to Softphone is not working,
even not ringing. During checking the logs i am getting the error:
Aug 3 0
What is the larger objective? Are you using the PGW purely as a B2BUA?
If so, that's a colossally overblown waste of resources; just use
something like SEMS or Asterisk.
On 08/06/2012 04:24 AM, phillman25 wrote:
Dear List
I am trying to accomplish the following:
Asterisk PABX (192.168.1
Authenticating ACK is troublesome as ACK may not be challenged. Thus,
some clients (IIRC also eyebam does it) send ACK with
Proxy-Authentication using previous nonce to avoid troubles in case the
proxy authenticates the ACK too.
regards
Klaus
On 03.08.2012 09:31, Ivan Milivojevic wrote:
Hi a
17 matches
Mail list logo
