On 11/27/2012 06:30 AM, Hemanshu Patel wrote:
Hi vitaliy,
thank you very much for your reply.
Here I am not talking about kamailio as Presence server, I am asking about BLF
handling
For SUBSCRIBE+NOTIFY+PUBLISH in case of presence, everything is working fine
In case of BFL, once the
No
as per my belief in BLF, phone doesnt send any PUBLISH request.
Server/Kamailio sends NOTIFY request based on dialog status to phones, if phone
tries to create new dialog or so.
Let me see dialog+pua_dialoginfo modules.
--
Regards,
Hemanshu Patel
Senior Software Engg
Daniel-Constantin Mierla writes:
There were two relevant options:
1) freeze by end of January (2013) and release by March
2) freeze by end of December (2012) and release by February
i'll vote for (2).
-- juha
___
SIP Express Router (SER) and
OK
ok - it's 56sec or 36sec?
It was 56 sec.
Now, after recompile, when cfg mem_join=0 the reload takes 8 sec and the
shmem real used is 25% of 4Gb.
When mem_join=, the reload take 30 sec and the shmem real used is 17%.
Looks good with mem_join=1.
Thanks,
Uri
On Mon, Nov 26, 2012 at 5:43 PM,
Hello Daniel.
Thanks for the patch, we’re going to pull the patch and see how it Works.
I did’t see anything else I the syslog. That was my first part to look for.
I will have updated about this issue.
Thanks!
Ricardo.-
*De:* Daniel-Constantin Mierla [mailto:mico...@gmail.com]
Hi ,
The proxy send the automatic provisioning message 100 Trying , near
1-2 seconds later the INVITE message, so the client send 3 times the same
invite (correct , 500 ms timer).
Is there any parameter to set , for the time between the INVITE and 100
message ?
Is correct to disable the
Hi all,
Please bear with me as this is my first post to a mailing list ever so
something might be quite wrong.
My question is: How do we make Kamailio HA ?
For the moment I’ve setup MySQL cluster with MySQL proxies that
provide 1 Virtual IP that I use to connect Kamailio to (for usrloc and
On 11/27/2012 09:13 AM, pars3c wrote:
Is correct to disable the automatic send, and set after the invite,
sl_send_reply(100, Trying); ?
Yep, that's a good solution.
The built-in 100 doesn't get sent until the t_relay() -- hence the delay.
--
Alex Balashov - Principal
Evariste Systems LLC
I'm trying to get the MWI indicator on endpoints to work by redirecting the
SUBSCRIBE to the voicemail server (asterisk) using usc_replace_(to|from).
This works fine for the initial request but the next subscribe will fail since
the to/from don't get rewritten, which is indicated by the error:
Greetings.
I observe strange behavior with Kamailio.
My iphone 3gs run softphone based on resiprocate.
First 10-20 minutes everything works fine.
After it the connection is closed from server (select() loop returns read
notification, read attempt returns zero bytes).
Ok, softphone closes old
Hi all,
Please bear with me as this is my first post to a mailing list ever so
something might be quite wrong.
My question is: How do we make Kamailio HA ?
For the moment I've setup MySQL cluster with MySQL proxies that provide 1
Virtual IP that I use to connect Kamailio to (for usrloc
Hi All,
I've been trying to get some Cisco/Linksys SPA phones working with Kamailio
(current stable). All seems to be ok apart from getting Presence/BLF/SCA
working.
The phones are set to
Server_Type : RFC3265_4235
Line Key 2 Extension : Disabled
Line Key 2
We can also use jssip library. They have some demo to try.
That won't fix his testing with non-WebSocket/browser client problems.
Peter
--
Peter Dunkley
Technical Director
Crocodile RCS Ltd
___
SIP Express Router (SER) and Kamailio (OpenSER) -
Hi all,
When I have this line in kamailio.cfg:
modparam(acc_radius, radius_config,
/etc/radiusclient-ng/radiusclient.conf)
Kamailio failed to start:
kamailio error, failed to start (/var/run/kamailio/kamailio.pid exists).
I already try to stop kamailio, an remove this file but don't work
In
I recently added an SCA module to the project. If you're willing to try the
master branch, I'd appreciate hearing how things work for you.
Here are instructions for building from the git repository:
http://www.kamailio.org/wiki/install/devel/git
Add sca to the include_modules value in
Hi Andrew
Thanks for that, I'll give it a go.
Would the module work with stable branch or do I need to compile up master?
Best regards
Mark
--
Mark Boyce
On 27 Nov 2012, at 19:44, Andrew Mortensen admor...@isc.upenn.edu wrote:
I recently added an SCA module to the project. If you're
On Nov 27, 2012, at 2:51 PM, Mark Boyce m...@darkorigins.com wrote:
Hi Andrew
Thanks for that, I'll give it a go.
Would the module work with stable branch or do I need to compile up master?
It should work with the stable branch.
andrew
On 27 Nov 2012, at 19:44, Andrew Mortensen
Hi guys,
I wonder if someone could sanity check something for me.
I currently have a simple load balancer set up using algorithm 10 (call
load distribution) from the dispatcher module. I'm using Record-Routing so
that I can clear down the call load record at the end of the call.
Everything
I am trying to get Linphone to show presence information. I did my Kamailio
setup using just the template from a stardard install and it is working
properly with Bria (X-Ten). However, when using Linphone it does not show
buddies presence. Any hint? Cheers! Moacir
Hi,
maybe it is not that kamailio related question, but I dont know any other
place with such good voip professionals ;) I have kamailio and mediaproxy.
Clients are BudgetTone 200 (Grandstream) and CSipSimple. I am forcing
clients to use SRTP but it does not support adding any certificate on both
All the topics/examples I found on the net is not what I am looking
for, so here is the question: How do I achieve parallel forking (call all
devices) if I have a single user registered using the same account from
different
devices (i.e.: table phone, iPad and PC)? What I want is to ring all
Hi, If you are using SRTP your conversations will be encrypted, so nobody
could eavesdrop it. Only if your Kamailio was compromised they could be
eavesdropped.
I think you are confusing SRTP (media) with signaling (SIP). You should
implement SIP over TLS too, it makes no sense to use SRTP
I forgot something, with Kamailio default configuration media goes always
directly between clients. Moreover, if you want to be sure that any
endpoint is who it says to be you should use client side autentication for
SIP protocol. TLS module documentation clears how to do it.
Am 27.11.2012 19:41, schrieb Peter Dunkley:
We can also use jssip library. They have some demo to try.
That won't fix his testing with non-WebSocket/browser client problems.
Peter
I just tried jssip in Chrome with Asterisk (directly and via Kamailio):
signaling work (no intensive testing)
On Wed, Nov 28, 2012 at 1:41 AM, Peter Dunkley
peter.dunk...@crocodile-rcs.com wrote:
We can also use jssip library. They have some demo to try.
That won't fix his testing with non-WebSocket/browser client problems.
Please read carefully, i write that as a respose for this sentence :
The
On Wed, Nov 28, 2012 at 6:26 AM, Klaus Darilion
klaus.mailingli...@pernau.at wrote:
Am 27.11.2012 19:41, schrieb Peter Dunkley:
We can also use jssip library. They have some demo to try.
That won't fix his testing with non-WebSocket/browser client problems.
Peter
I just tried jssip in
Running CentOS 6 but I did try something similar with a separate file with no
luck.
If I use the default syslog.conf file and send messages to default log file, I
still get nothing.
From: sr-users-boun...@lists.sip-router.org
[mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of
Hi,
Just few quick questions , can you ping the second asterisk from secondary
Kamailio ? what is the routing set for that. Does your second asterisk box
gets inactive in dispatcher show command after 30 seconds ?
Mine worked fine, the key is the linux routing table.
BR
Sammy
On Tue, Nov 27,
Hello Samy,
Thank you for the hint, I will test later today and let you know the results.
Best regards,
Rumen
On 28 November 2012 07:00, SamyGo govoi...@gmail.com wrote:
Hi,
Just few quick questions , can you ping the second asterisk from secondary
Kamailio ? what is the routing set for
29 matches
Mail list logo
