Hi All,
i have a query here,
the user is registered with the open IMS and also with Kamailio ( as a third
party registration via SCSCF )
Here my issue is ;
when the user makes a call, the INVITE reaches to kamailio from SCSCF( Scscf
port is 6060) , when the Kamailio sends the INVITE back
kamailio -D no -l eth0 -l eth1 -l eth2
Try this?
On Tue, Aug 5, 2014 at 12:21 PM, Yuriy Gorlichenko
wrote:
> I Already use it.
> As I see my problem about to run the main kamailio process in foreground
> and fork child processes as usual.
>
>
> 2014-08-05 23:18 GMT+04:00 Brandon Armstead :
>
>
With this key it starts, but I need very exotic thing. I need start only
main process as foreground. Other processes must bee at the fork mode. I
search analog implementation of patch that was created at 2007)
2014-08-05 23:28 GMT+04:00 Brandon Armstead :
> kamailio -D no -l eth0 -l eth1 -l eth2
I Already use it.
As I see my problem about to run the main kamailio process in foreground
and fork child processes as usual.
2014-08-05 23:18 GMT+04:00 Brandon Armstead :
> Yuriy,
>
> You can use the listen directive multiple times.
>
> listen=eth0
> listen=eth1
>
> etc...
>
>
> On Tue, Aug 5,
Yuriy,
You can use the listen directive multiple times.
listen=eth0
listen=eth1
etc...
On Tue, Aug 5, 2014 at 12:09 PM, Yuriy Gorlichenko
wrote:
> Hello. I Installed kamailio 4.1.4, when I starting my server I see
> following Warning
>
> no fork mode and more than one listen address found (w
Hello. I Installed kamailio 4.1.4, when I starting my server I see
following Warning
no fork mode and more than one listen address found (will use only the
first one)
So I see only first listening port at my netstat
At my kamailio.cfg file I write fork=yes? but it not helps me.
I found the same
Hello Daniel,
Sorry, but Im not sure to understand.
Use the resolver included in Kamailio would be better in that case because
the negative reply coming from outside resolver would be recorded for a
timeperiod? In this timeperiod, no other DNS requests for the same type and
the same host wou
Hello,
This is the result :
# make install-cfg
/bin/sh: -c: line 18: syntax error near unexpected token `fi'
/bin/sh: -c: line 18: ` fi ; \'
make: *** [install-cfg] Error 2
Best Regards,
Djamel BAHAMID.
Le 05/08/2014 17:32, Daniel-Constantin Mierla a écrit :
Hello,
On Tue, Aug 5, 2014 at 11:06 AM, Richard Fuchs wrote:
> On 05/08/14 11:01 AM, Paul Belanger wrote:
>>
>> I was hoping somebody could confirm the following is a _normal_ log
>> file for rtpengine. Specifically I am curious of the 'Successful STUN
>> binding request from' messages are continuously
Hello,
apparently none of the rtp relays I was looking at (rtpproxy and
rtpenging) are taking in consideration the CSeq value. Quite recently I
met a case with a b2bua that sends the invite without sdp, then after
its ACK with SDP sends quickly a re-invite to get itself out of media
stream. H
Hello,
can you try next command?
make install-cfg
Cheers,
Daniel
On 05/08/14 16:14, Djamel Bahamid wrote:
Hello,
We resumed your procedure such as it is described on your site, and we
compiled with the debug mode, we reproduced the same error, below the
executed commands and their results
It would be great if you can provide more details where the error pops up.
Cheers,
Daniel
On 05/08/14 15:49, Brandon Armstead wrote:
Daniel,
I can confirm this bug on Debian. I hasn't bothered looking into
it further since it was simple enough to manually complete remainder
of install.
Hello,
short reminder that 4.1.5 will be packaged tomorrow or Thursday. If
there is something new to report on 4.1 branch, write to sr-dev mailing
list.
Cheers,
Daniel
On 30/07/14 10:51, Daniel-Constantin Mierla wrote:
Hello,
I am considering to release v4.1.5 sometime next week, most like
On 05/08/14 11:01 AM, Paul Belanger wrote:
I was hoping somebody could confirm the following is a _normal_ log
file for rtpengine. Specifically I am curious of the 'Successful STUN
binding request from' messages are continuously logged.
Chrome seems to be doing this during normal operation. I
I was hoping somebody could confirm the following is a _normal_ log
file for rtpengine. Specifically I am curious of the 'Successful STUN
binding request from' messages are continuously logged.
Are they part of the normal operation or does this indicate some issue
with media? I only ask because
Hello,
We resumed your procedure such as it is described on your site, and we
compiled with the debug mode, we reproduced the same error, below the
executed commands and their results :
# make -d install
...
...
...
Trying pattern rule with stem `install-share'.
Rejecting impossible im
Daniel,
I can confirm this bug on Debian. I hasn't bothered looking into it
further since it was simple enough to manually complete remainder of install.
I'll pull more debug data for you when I make it into the office shortly if
someone doesn't get to it before me.
Sent from my iPhone
It is working ok with bash here and this is probably the most used shell.
Are you sure you haven't changed the Makefile somehow?
Can you try running make with verbose/debugging parameter and see if
there is a hint in the output?
Daniel
On 05/08/14 14:36, Djamel Bahamid wrote:
Hello,
When I
Hello,
When I execute the command echo $SHELL, I have the following result :
/bin/bash
What's to be done now to avoid this error ?
Best Regards,
Djamel.
Le 01/08/2014 22:13, Daniel-Constantin Mierla a écrit :
Hello,
what is your shell? See where /sbin/sh is pointing to:
ls -l /sbin/sh
al
Hello,
you have to use remove_hf(...) and insert_hf(...) in this case -- see
the readme of textops module for details about these two functions.
Cheers,
Daniel
On 05/08/14 12:41, Stefan Kohlhauser wrote:
Hello,
I have a subnet with a Kamailio and some phones. Unfortunately these
phones are
Hello,
I have a subnet with a Kamailio and some phones. Unfortunately these phones are the only ones in the network that are unaware of the prefixes for the sip usernames. These prefixes should be added by Kamailio. For INVITEs its no problem as $ru/$rU are writeable.
Problem: If I send a REFE
yup, i always download kamailio from official repo mentioned here,
http://www.kamailio.org/wiki/install/devel/git
Thank you.
On Tue, Aug 5, 2014 at 3:03 PM, Daniel-Constantin Mierla
wrote:
>
> On 05/08/14 11:55, Muhammad Shahzad wrote:
>
> OK, created the patch finally...
>
>
> http://webr
On 05/08/14 11:55, Muhammad Shahzad wrote:
OK, created the patch finally...
http://webrtc.voip-demos.com/0001-added-support-for-network-io-intercept.patch
I will look over it and push it to the repository if everything is ok.
I had to add all file i wanted to include in the commit using "g
OK, created the patch finally...
http://webrtc.voip-demos.com/0001-added-support-for-network-io-intercept.patch
I had to add all file i wanted to include in the commit using "git add",
even the ones that are already included in git repo, e.g. corex.xml and
corex_mod.c.
I will just let you know i
You should use:
git format-patch -1
The in your case appears to be f415b0c . If it is last commit,
should work with:
git format-patch -1 HEAD
Cheers,
Daniel
On 05/08/14 11:25, Muhammad Shahzad wrote:
These commands do not seem to work for me. Can you please do the patch?
1. adding files
These commands do not seem to work for me. Can you please do the patch?
1. adding files work,
git add modules/corex/corex_nio.c modules/corex/corex_nio.h
git status
# On branch master
# Changes to be committed:
# (use "git reset HEAD ..." to unstage)
#
#new file: modules/corex/corex_nio.
The dialog event route should have the $dlg(...) variable available that
you should use as input in an sql_query():
-
http://www.kamailio.org/wiki/cookbooks/4.1.x/pseudovariables#dialog_module_pseudo-variables
At timeout there is no request there. It is the event that triggers tm
to build an
Can you do a commit on your local git clone and send the patch? It is
easier to review the changes. Practically use:
- git add -- to add new files
- git commit -- to commit changes
- git format-patch -- to get the commit in a file
Cheers,
Daniel
On 05/08/14 01:14, Muhammad Shahzad wrote:
Done
Hi,
In ‘event_route[dialog:end]’I can not get any variable they are all empty but
using acc_db_requests() worked for me.
Thanks for your help.
BEST REGARDS
From: Daniel-Constantin Mierla
Sent: Monday, August 04, 2014 5:28 PM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] miss
29 matches
Mail list logo