On 29/05/15 12:48, Gopalakrishnan N wrote:
> Somehow got improvement, I am able to start the kamailio service and
> able to register two extensions. but again , am getting some error in
> Asterisk console and in /var/log/messages
> *Asterisk console *
> chan_sip.c:16090 parse_register_contact: No
Hello,
On 02/06/15 22:04, Al S wrote:
> Hi,
>
> I was wondering if it's normal for "location" table to be updated
> almost 10 sec after receiving REGISTER.
see db_mode parameter for usrloc module in order to specify how sync to
db is done.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://twit
Hi!
Please help me to configure rtpproxy on centos + kamailio.
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi Daniel,
It's great to hear something new from you. I 'll give it a try and report if it
works.
From: Daniel-Constantin Mierla [mailto:mico...@gmail.com]
Sent: Tuesday, June 02, 2015 5:20 PM
To: Dao Hai Dang; Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Problem with command kamc
Hi,
to achieve the described behavior you could call t_on_branch(BRANCH_NAME)
before calling t_relay.
In this way each branch, after forking and before being relayed, will
traverse the branch_route named BRANCH_NAME.
http://www.kamailio.org/docs/modules/devel/modules/tm.html#tm.f.t_on_branch
Hope
I am trying to use cnxcc for credit control . It seems like dialog and
cnxcc modules are getting out of sync. For some reason , I see
cnxcc.active_clients gets stuck and they never clear up. Interestingly
only calls that gets failure 5xx and 4xx from PSTN gateway gets stuck,
all successful ca
Hi,
I was wondering if it's normal for "location" table to be updated almost 10 sec
after receiving REGISTER.
Thanks,Al ___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip
Ali Taher writes:
> I'm using LCR module in Kamailio , where matching of the rule (From-URI in
> LCR-rule table) is currently based on user part of sip address in From field
> (highlighted below in blue).
>
> While we need to change the identification to be on the otg value sent in
> the sip addr
Hi!
Currently we have the following logic in our Kamailio routing script.
On incoming INVITE, we lookup() the location of called party, then we
analyse the updated Request-URI ($ru) regarding callee contact
protocol: is it websocket-based or not, to distinguish web-based
useragents from classic SI
Richard Fuchs wrote
> On 02/06/15 06:35 AM, Vasiliy Ganchev wrote:
>> Richard Fuchs wrote
>>> On 29/05/15 11:16 AM, Vasiliy Ganchev wrote:
On May 29, 2015; 3:19pm, Richard Fuchs wrote:
> A good way to start debugging this is to run rtpengine with log-level
> 7
> and post the full
We recently implemented strongswan project which supports ipsec.
https://www.strongswan.org/
On Jun 2, 2015 6:59 AM, "Måns Nilsson" wrote:
> Subject: [SR-Users] IPSec supporting open source SIP Server Date: Mon, Jun
> 01, 2015 at 02:51:00PM +0530 Quoting Priyaranjan Nayak (
> priyaranjan4...@gma
Subject: [SR-Users] IPSec supporting open source SIP Server Date: Mon, Jun 01,
2015 at 02:51:00PM +0530 Quoting Priyaranjan Nayak (priyaranjan4...@gmail.com):
> Hi All,
>
> I need one IPSec supported opensource SIP server for testing my sip client
> endpoint.Could you please tell me which SIP ser
Hello,
dbaliases is probably easier to manage, otherwise both can be used for
such mapping.
Cheers,
Daniel
On 02/06/15 15:02, Al S wrote:
> Hi,
>
> Thank you for the response. What table in Kamailio database can be
> used to map AORs to unique contact?
> location table or dbaliases table?
>
> T
Hi,
Thank you for the response. What table in Kamailio database can be used to map
AORs to unique contact?location table or dbaliases table?
Thanks,Al
Date: Tue, 2 Jun 2015 12:12:47 +0200
From: mico...@gmail.com
To: sr-users@lists.sip-router.org
Subject: Re: [SR-Users] RFC 6140
On 02/06/15 06:35 AM, Vasiliy Ganchev wrote:
> Richard Fuchs wrote
>> On 29/05/15 11:16 AM, Vasiliy Ganchev wrote:
>>> On May 29, 2015; 3:19pm, Richard Fuchs wrote:
A good way to start debugging this is to run rtpengine with log-level 7
and post the full log for such a call.
>>> Hi Ric
Hello Ali,
Have a look at this function:
http://kamailio.org/docs/modules/4.2.x/modules/uac.html#uac.f.uac_replace_from(uri)
Be sure to properly read about how it works and the formal implications
of using it, though.
-- Alex
On 06/02/2015 06:40 AM, Ali Taher wrote:
Hi,
I’m using LCR mod
Hi,
I'm using LCR module in Kamailio , where matching of the rule (From-URI in
LCR-rule table) is currently based on user part of sip address in From field
(highlighted below in blue).
While we need to change the identification to be on the otg value sent in
the sip address in From field (high
Richard Fuchs wrote
> On 29/05/15 11:16 AM, Vasiliy Ganchev wrote:
>> On May 29, 2015; 3:19pm, Richard Fuchs wrote:
>>> A good way to start debugging this is to run rtpengine with log-level 7
>>> and post the full log for such a call.
>> Hi Richard! Thanks for answer!
>> Call log written on WS_K
Hello,
I pushed a patch that hopefully fixes the issue. Right now the patch is
in master and 4.3 branches, it will be backported to 4.3 later, after
more testing.
If you want to give it a try, it can be taken from:
-
https://github.com/kamailio/kamailio/commit/b63dd52685970914e11c670bae5ac6b21
Hello,
an ipsec tunnel appears as an network interface, therefore a lower layer
than a SIP server deals with. As soon as you get the ipsec tunnel
running, kamailio can be started and receive traffic on it. Nothing else
special needed for kamailio.
Also, you can run kamailio on a single interface
Hello,
implementation of the rfc is not embedded in the module, but
functionality can be achieved with few config options.
A variant would be:
if(!lookup("location")) {
# phone not registered with own extension, try to see if it is a bulk
registration
$var(rU) = $rU; # backup dialed numb
Hello,
I am considering to release next major version of Kamailio (v4.3.0) next
week, on Wednesday (June 10) or Thursday (June 11). The pool of things
to fix is minor, Victor already updated deb packaging for 4.3, left to
do: add docs for 4.3 series in wiki, prepare RPM packaging and build
proper
22 matches
Mail list logo