Hi guys,
I've my Kamailio box that works great J
Now I would like to enable wifi on the board (in AP mode) in order to allow
mobile devices to connect and receive and place calls.
Is it possible? Is it possible to configure Kama like a "gateway" between
two network cards?
I've find a guid
Hello,
I couldn't spot any rtpengine module function used inside the routing
blocks. Look at default kamailio.cfg and see how rtpproxy_manage() is
used -- you should use rtpengine_manage() instead.
Cheers,
Daniel
On 04/08/16 16:09, Jack Stevens wrote:
>
> Hi Guys,
>
>
>
> Looking for some help
hi all,
i have configured kamailio and RTPProxy on one ubuntu server then
freeswitch on another server.
all servers installed on digital ocean.
i was tried to build following setup,
SIP_Call--> kamailio+RTPPROXY---> freeswitch
put following configurations on kamailio.
modparam("rtppro
Hi Guys,
Looking for some help on configuring RTP Engine with Dispatcher on my Kamailio
Box
Please see this paste for the kamailio configuration =
http://pastebin.com/yZzSEJmK
When I run a call the dispatcher does it job perfectly but the rtpengine is not
been used does anyone know why
--
Hi Daniel,
Thanks. I have added credits in Subscriber. But where exactly should
I insert the SQL statements in kamailio.cfg so that it gets executed
for each and every call. The rate_unit multiplied with time_unit in
billing_rates should be done in realtime, I guess.
Also is it possible to check
when starting from the "sbin" directory it uses this as default:
"/var/run/kamailio.pid"...I changed it to
"PID_FILE=/var/run/kamailio/kamailio.pid" and it works fine as well
the PID_FILE in the " /etc/init.d/kamailio" file is also that one: "
PID_FILE=/var/run/kamailio/kamailio.pid" and that
thank you, yes, I did have to change these lines according to my install path ,
these are my settings:
KAM=/usr/local/kamailio-4.4/sbin/kamailio
KAMCFG=/usr/local/kamailio-4.4/etc/kamailio/kamailio.cfg
PROG=kamailio
PID_FILE=/var/run/kamailio.pid
LOCK_FILE=/var/lock/subsys/kamailio
RETVAL=0
DEF
Hello Fabian,
I had a similar problem and build my own little kamailio.service file for
CentOS7. Please find it attached, just drop it under /etc/systemd/system/ and
give it execution permissions and activate it afterwards with "systemctl enable
kamailio.service" and "systemctl start kamailio.s
Hi,
I'm not sure about Centos 7, but on Centos 6, you need to update kamailio
init.d script to make it work. Following lines should be updated:
KAM=/usr/local/sbin/kamailio
KAMCFG=/usr/local/etc/kamailio/kamailio.cfg
PROG=kamailio
PID_FILE=/var/run/kamailio/kamailio.pid
And you need to create dir
Hello
I installed/compiled version 4.4 on CentOS 7. When I start the server like
this: "./kamctl start" it works but when I try to use the script:
"/etc/init.d/kamailio" it fails
[root@ar-mia-proxy-01 sbin]# /etc/init.d/kamailio start
Starting kamailio (via systemctl): Job for kamailio.serv
Hi Daniel,
As mentioned previously, I've pasted a copy of the loose.c log lines below.
Aug 4 09:21:43 ip-10-10-2-5 /sbin/kamailio[4711]: DEBUG: rr [loose.c:179]:
find_next_route(): No next Route HF found
Aug 4 09:21:43 ip-10-10-2-5 /sbin/kamailio[4711]: DEBUG: rr [loose.c:846]:
after_loose(): n
Hello,
can you get the output of gdb commands:
bt full
info locals
Cheers,
Daniel
On 04/08/16 08:49, pars3c wrote:
> Hello ,
> i make many request toward jsonrpc server, using dlg.profile_list. Usually on
> high load, kamailio crash .
> Last time in the dump, ther is :
> 0 0x7f25361cd00
It will be helpful if you can provide a pcap with the network capture of
sip packets for such call taken on kamailio server. Then we can see if
rtp relaying was engaged or not.
Cheers,
Daniel
On 04/08/16 04:55, Kotb, Amir wrote:
>
> [03:50] I have a small query, can anybody assist please?
> [03
13 matches
Mail list logo