Hello,
Thanks for your suggestion, unfortunately it had no effect on the outcome.
This (using asterisk-kamailio integration with a domain specified for
clients) must have been achieved before, I wonder if I'm doing something
wrong here, or is this just not doable?
Thanks,
Olli
2014-05-18
Hello,
It took me a while to get forward on this, but I had progress. I've changed
my sip.conf back and forth so I can't name the exact cause for my problem,
but it may have been the fact that in my asterisk sippeers table the fields
permit and deny may have been in the wrong order. And/or some
Try updating your /etc/hosts file with the domain 'testers.com'.
Arun
On Sun, May 18, 2014 at 5:06 AM, Olli Heiskanen
ohjelmistoarkkite...@gmail.com wrote:
Hello,
It took me a while to get forward on this, but I had progress. I've
changed my sip.conf back and forth so I can't name the
Hello,
Gracias Pedro, kiitos Mikko.
It's good to know I have configured Kamailio correctly. I added the type
into my table but so far no luck having asterisk see the clients
registered, at least on cli. I do see that asterisk adds registration data
into the table. I'll work on this for a bit and
Try to install sngrep In both hosts (Kamailio and asterisk). It will help
you figure what is happening more clear.
I'll double check my own config, and Let you know the needed fields, At
least for my case.
I used the same integration guide, and splitted the model in 3 servers.
One for
Ahhh also, don't forget to place the *rtcachefriends*=*yes* in your
sip.conf (asterisk) to show the realtime peers
El abr 23, 2014 8:29 AM, Olli Heiskanen ohjelmistoarkkite...@gmail.com
escribió:
Hello,
Gracias Pedro, kiitos Mikko.
It's good to know I have configured Kamailio correctly. I
Olli Heiskanen ohjelmistoarkkite...@gmail.com:
Thanks for the help, here's what I dug up:
The users are visible in Kamailio, output of kamcmd ul.dump:
(here 1.1.1.1 is the public ip of my Kamailio+Asterisk server and 2.2.2.2
is the public ip of my home network)
Looks like problem is not in
Don't forget to include peer type (friend), and The callbacknumber In The
table.
It happened to me and asterisk/kamailio behavior was wayyy to weird until
made sure both parameters were there.
-
In this setup I have SIP peers in an asterisk table added like this:
INSERT INTO sippeers
