h each other is indeed confusing.
For me, the change is welcome and I'm in favor of doing all the effort
at once.
Regards.
Carlos
On Mon, Oct 8, 2012 at 11:33 AM, Daniel-Constantin Mierla
mailto:mico...@gmail.com>> wrote:
Hello,
some bits were left with the old pr
to be sent to port 5060 (or 5061 for tls), or you can
configure kamailio to listen on an additional port where you send the
msrp packets.
If something is not working, send the log messages (debug=3 in your
config) and the ngrep trace if you use plain tcp.
Cheers,
Daniel
--
Daniel-Constantin M
rough
rtpproxy in sip server and then it will dispatch RTP packets to MCU?
Thanks.
Br,
Marina
From: Daniel-Constantin Mierla <mailto:mico...@gmail.com>>
Reply-To: "mico...@gmail.com <mailto:mico...@gmail.com>"
mailto:mico...@gmail.com>>
Date: lunes 8 de oc
dds client B as
a contact, the kamalio server is not sending out an auth request to
client B. Even though it's registered for presence.winfo events.
Thanks,
Sangeeta
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamail
;transport=udp on behalf of
sip:8475551004@10.50.251.12 for event presence
I am using Kamailio 3.3 with Presence and RLS with integrated XCAP.
The only significant change i made today is update the presence and
RLS config to DB ONLY mode.
Thanks,
Sangeeta
--
Daniel-Constantin Mierla - http
care of them.
Thanks,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 -
http
ge or send via email.
If you don't have the right answer, just leave it as TBA in the wiki,
via email is fine to send just the question.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advance
need it.
Just for adding information, and without any intention to start a
flame-war, with opensips 1.8.0-tls the server does not crash...
Thanks in advance!
Samuel.
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
h
Oct 9 12:44:21 kamailio1 kamailio[17420]: ALERT: [main.c:788]:
core was generated
so i guess somewhere in the disk there is a core file
Thanks a lot, Daniel,
Samuel.
On 9 October 2012 12:08, Daniel-Constantin Mierla <mailto:mico...@gmail.com>> wrote:
Did you get a core dump, ca
can track what
actions in the config were executed.
Daniel
On 10/9/12 1:01 PM, samuel wrote:
This is the output of the core file:
(gdb) bt full
#0 do_action (h=, a=0x485f3832315f4d43,
msg=) at action.c:340
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda
gt;<--><-->uac_reg_update(it->r, tn);
<--><--><-->it =bsp;it->next;
<--><-->}
<-->}
}
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-us
rené
Daniel-Constantin Mierla
Dienstag,
9. Oktober 2012 14:08
Hello,
you added an extra parameter t
attach the sip messages of a call with/without MCU:
...
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 1
child process 18152 exited by a signal 11
Oct 9 15:30:13 kamailio1 kamailio[18137]: ALERT: [main.c:788]:
core was generated
last lines 6xx are the usual handling of request within dialog, being
the last one a sl_send_reply.
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitte
Then you can access it via $sht(...).
In case you didn't delete any items, you should be able to do a while
loop with an index variable to access all they items build using same
array-key.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/mico
nitored and recorded.
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http:/
. I've tried to use TLS, TCP, and UDP
transports from the User Agent and in all cases there is a problem
when the setflag of siptrace module is set.
How can I debug further the issue?
Thanks a lot indeed for your support!!
Samuel.
--
Daniel-Constantin Mierla - http://www.asipto.com
unknown script pseudo variable $msrp(method)
ERROR: bad config file (29 errors)
Thanks,
Ed
On Mon, Oct 8, 2012 at 6:14 PM, Daniel-Constantin Mierla
mailto:mico...@gmail.com>> wrote:
Hello,
On 10/8/12 5:26 PM, Ed Bra
ave any tipp what to chance?
cheers,
rené
Daniel-Constantin Mierla
Dienstag,
? (apart from listening on an IPv6 address)
don't they have access to a dns server that could
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kam
uter.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Mi
On 10/11/12 12:00 PM, Alex Hermann wrote:
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
is USE_IPV6 compile flag still on?
Yes, the exact same verion is used on the IPv4 and IPv6 proxy processes.
They're even on the same host.
Do you get any other error/debug
message b
o (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - ht
ailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8,
r.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constan
e the timestamp in an avp when 180 response comes in an
onreply_route
- progress - store the timestamp in an avp when 183 response comes in an
onreply_route
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kam
s appreciated. We just want to see a notification request
being sent out to client B requesting auth for presence. Not sure if
the above code is tied to that. Haven't been able to trace
when send_last_notify gets triggered.
Thanks,
Sangeeta
--
Daniel-Constantin Mierla - http://www.asipto.
nect to RTP proxy
Oct 12 01:54:55 sips /usr/sbin/kamailio[1155]: ERROR: rtpproxy
[rtpproxy.c:1536]: proxy does
not respond, disable it
Oct 12 01:54:55 sips /usr/sbin/kamailio[1155]: WARNING: rtpproxy
[rtpproxy.c:1393]: can't get version of the RTP proxy
Oct 12 01:54:55 sips /usr/sbin/kamai
rials:
http://kb.asipto.com/asterisk:realtime:kamailio-3.3.x-asterisk-10.7.0-astdb
kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Tra
Hello,
I will package Kamailio v3.3.2 tomorrow. Let us know if some fixes from
master were not backported yet.
Cheers,
Daniel
On 10/9/12 10:33 AM, Daniel-Constantin Mierla wrote:
Hello,
I am considering packaging Kamailio v3.3.2 at the beginning of next
week (Monday or Tuesday). If any of
users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Ad
This path does not look ok:
/xmlns:resource-lists/xmlns:list%5B@name="rcs"%5D
Where is it coming from?
Cheers,
Daniel
On 10/10/12 4:50 PM, Sangeeta Shah wrote:
Any clue what the correct path is supposed to be - per the data in the
xml and the path that's printed out by the module?
Thanks,
Sa
On 10/11/12 2:11 PM, Alex Hermann wrote:
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
On 10/11/12 12:00 PM, Alex Hermann wrote:
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
Do you get any other error/debug
message before that can give an hint why is failing
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http
tes for forwarded requests
# - serial forking, RTP relaying handling, a.s.o.
if (is_method("INVITE|SUBSCRIBE")) {
t_on_branch("MANAGE_BRANCH");
t_on_reply("MANAGE_REPLY");
}
if (is_method("INVITE&qu
eld information about the call is
entered correctly.
So the variable $ DLG_lifetime information about the duration of the
call does not get.
But most of all I am wrong somewhere.
2012/10/15 Daniel-Constantin Mierla <mailto:mico...@gmail.com>>
Hello,
do you get any error
Hello,
quick note to let everyone know that after 12:00GMT I am starting to
package v3.3.2 -- after that time do not commit in the branch 3.3 until
the release is announced. For urgent matters write to sr-dev first.
Cheers,
Daniel
On 10/15/12 9:03 AM, Daniel-Constantin Mierla wrote:
Hello
the
crash (not to the ctl file)? The log message about ctl can be printed
due to normal stop/restart. If there is a crash, maybe you get a
coredump file and you can send the backtrace.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.
Hello,
On 10/16/12 1:37 PM, Alex Hermann wrote:
On Monday 15 October 2012, Daniel-Constantin Mierla wrote:
On 10/11/12 2:11 PM, Alex Hermann wrote:
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
DEBUG: [dns_cache.c:567]: dns_hash_find([IPv6 Address](30), 1),
h=707 DEBUG
, Debian/Ubuntu packages will be available soon as well.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami
On 10/17/12 9:28 AM, Juha Heinanen wrote:
wiki tells:
$fs - reference to the forced socket for message sending (if any) in the
form proto:ip:port
should it be [proto:]ip:port instead?
why, isn't the proto always in the value of $fs?
Cheers,
Daniel
--
Daniel-Constantin Mierla -
On 10/17/12 4:34 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
$fs - reference to the forced socket for message sending (if any) in the
form proto:ip:port
should it be [proto:]ip:port instead?
why, isn't the proto always in the value of $fs?
i have been using this kind of
using a separate script.
Ajay
*From:*Daniel-Constantin Mierla [mailto:mico...@gmail.com]
*Sent:* Friday, October 05, 2012 1:29 AM
*To:* SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
Users Mailing List
*Cc:* Ajay Sabat
*Subject:* Re: [SR-Users] make option to clean the installed
-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 -
http://asipto.com/u/katu
On 10/17/12 8:30 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
rtpproxy_manage() is supposed to work nicely when called for
requests/replies with no sdp, just not to care if is INVITE or ACK with
no sdp, or such similar situations.
does using rtpproxy_manage() avoid the cancel
://www.kamailio.org/wiki/packages/rpms
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14
Hello,
On 10/16/12 11:29 PM, Jon Bonilla (Manwe) wrote:
El Tue, 16 Oct 2012 17:00:03 +0200
Daniel-Constantin Mierla escribió:
Hello,
Kamailio SIP Server v3.3.2 stable release is out.
For more details about version 3.3.2 (including links and hints to
download the tarball or from GIT
s happened?
-- juha
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.c
/kamailio/kamailio.cfg, line 878, column 12:
ERROR: bad config file (5 errors)
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced
On 10/19/12 12:02 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
I fixed it on the master branch for now, probably it has to be
backported.
ok, thanks. looks like i'm the only one who has ever tried and for me
fix in master branch is enough.
I guess Andreas was the one that
Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced
On 10/19/12 8:30 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
Popping in late, maybe I missed some parts, but I want to clarify that
all these cases discussed here were not tested with rtpproxy
application, right?
yes, they are all tested with real mediaproxy-ng rtpproxy server
On 10/19/12 9:11 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
why is that? in failure_route I call rtpproxy_mange() which calls
unforce_rtp_proxy() which destroys the initiated session.
as explained in earlier messages of this thread, the situation unused
rtp sessions pile up
On 10/19/12 9:40 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
But in this case the call is completed, because negative response codes
are absorbed by tm, 200ok being sent back, so no need to destroy any rtp
session. iirc, for all branches of a parallel fork there is one rtp
return -1;
}
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.co
ilman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 -
http://asipto.com/u
ee: bad pointer
(nil) (out of
memory block!) - aborting
0(2338) ALERT: [main.c:742]: child process 2347 exited by a
signal 6
/
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.si
-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 -
http
On 10/22/12 7:59 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
For safety, i would use 48, to allow zero termination
why 48 when max length of ipv6 addr is 39 chars? did you mean 40?
text representation can use ipv4 format for last 4 bytes:
http://tools.ietf.org/html/rfc4291
sponsible for this IP-Range was poorly
configured and would not answer at all).
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-user
On 10/22/12 8:23 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
Then add 3 for the square brackets and the ending 0.
where are square brackets specifies? there is nothing about them in
http://tools.ietf.org/html/rfc4291.
I gave the link to show the ipv4 representation. Square
- the stored value does not take a longer byte than needed
in database and, at least for address, comparison is done in memory.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, No
On 10/22/12 8:36 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
I gave the link to show the ipv4 representation. Square brackets are
commonly used in ipv6 representations, specially in url/uri -- wikipedia
link you provided mentions that..
yes, but when they are used in url
On 10/22/12 9:01 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
many times the management system sits between chair and keyboard :-) ,
being able to read/add human representation is really crucial in this
case.
leaving out square brackets, which are not specified in ipv6 address
8Tel RO: +40-31-223-9152
Sect 1, Bucuresti mailto:marius.zbih...@1and1.ro
71295, Romania
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
D
tool, a recommendation for each binary
app in many linux distros.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced
On 10/22/12 9:37 PM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
I am not sure anymore the reason of the debate here. Saving two optional
bytes which are not allocated if not used in a db varchar field?
it started because there is three different lengths of ip address field
in
o use the
function that detects is valid ipv6, not just something starting with '['.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://a
elp me, maybe with another solution?
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
h
cal Director
Crocodile RCS Ltd
___
sr-dev mailing list
sr-...@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced T
RT") {
...
} else
msrp_reply("501", "Request-method-not-understood");
Is REPORT end to end?
Cheers,
Daniel
Regards,
Peter
On Thu, 2012-10-25 at 13:16 +0200, Daniel-Constantin Mierla wrote:
Hello,
just remembered about this one ...
hmm, I would
t would be nice if Kamailio refuses to lookup both IPv4 and IPv6 addresses
independent of the address family of listening sockets (see my emails about
dispatcher and IPv6, where DNS lookups on IPv6 addressed are only skipped if
Kamailio is listening on an IPv6 address).
--
Daniel-Constantin Mie
ctlrc file if you update kamctl.
This change impacts development version (to be released as 3.4.0). Two
other components are in the to-do list for this change: perl and snmpstats
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linke
sql and tls modules.
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://
588 (flags 0x4018), fd 17
On Wed, Oct 31, 2012 at 5:04 PM, Ramazan Yilmaz <mailto:ramazan...@gmail.com>> wrote:
These messages are for tls. When switched to TCP, it works fine.
What can be the problem?
On Wed, Oct 31, 2012 at 3:39 PM, Daniel-Constantin Mierla
mailt
tls module parameters,
of course) in kamailio.cfg file. So I do not make any change on
children parameter value while switching to TCP, i.e. I have the
following lines in kamailio.cfg
fork=yes
children=4
Any suggestion?
On Wed, Oct 31, 2012 at 6:18 PM, Daniel-Constantin Mierla
mailto:mico...@gmail.c
t changing the domain/ip values. And it worked. Then I used the
>> same configuration file on some other versions of Ubuntu server, and it
>> worked again. So, it really seems as a bug in kamailio.
>>
>> It seems the worker children cannot be forked for some reason at startup,
&
ehavior?
Thanks a lot!
Maurice
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http:/
p main process
And, now I can register to kamailio :) No error is written in syslog.
An interesting workaround...
Is this normal? i.e. is listening on a tcp port mandatory?
On Mon, Nov 5, 2012 at 12:03 PM, Daniel-Constantin Mierla
mailto:mico...@gmail.com>> wrote:
Hello,
can yo
ill available
in the current release of 3.3
Thanks
Kellon
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - h
ess Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kama
the patch I'm testing at the moment if someone is curious about
it is ok, indeed.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/ka
n item in htable
matching the dialed number and if selected gateway matches the value, if
yes, then use the next gateway.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-
in this case for the moment, the queries will
be discarded.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training
such scenario?
> >
> > Cheers!
> > Moacir
> > ___________
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
> > sr-users@lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinf
g list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
K
quot;ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but
stateful ACK;
# must be ACK after a 487 or
e.g. 404 from upstream server
t_relay();
Hello,
I pushed a fix for it, different than your suggestions, using a modifier
in the rpc scan parameter to specify optional input.
You can get the latest branch 3.3 and try -- reply and say if all goes
fine now.
Cheers,
Daniel
On 11/8/12 7:37 AM, Daniel-Constantin Mierla wrote:
Hello
mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 -
amailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8
Hello,
With latest stable you should be able to execute acc_db_request() for the reply
in onreply_route. Then it should take the totag from reply.
When doing in failure route, it processes the incoming invite that has no totag.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com
Forgot to say that you should also look at failed transaction flag parameter in
acc, it should handle your needs, iirc.
Daniel-Constantin Mierla
http://www.asipto.com
On 10 Nov 2012, at 08:41, Daniel-Constantin Mierla wrote:
> Hello,
>
> With latest stable you should be able t
eader of the ACK message
> for the re-INVITE to be a unique number?
>
>
> PS1: We are running kamailio v3.3.
>
> PS2: we did not have this issue with the old version of openser.
>
> Thanks,
>
> AS
>
>
>
>
> _____
Hello,
On 6 Nov 2012, at 23:53, Owen Lynch wrote:
> I've made some progress. It seems that dlg_manage() is required in the route
> script. Now I have CDR in syslog:
>
> NOTICE: acc [acc_cdr.c:192]: st=1352240307.196; et=1352240319.116; d=11.920
>
> but not as a RADIUS record. Looking at the
) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman
/pseudovariables#t_name
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip
here as well as the log error messages from the
xml parser?
For example, siremis uses the xmlrpc interface and all is ok with
handling the replies. It uses a library from php pear.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.
, Kristofer Signer wrote:
Hello,
running kamailio 3.3.2.
On Mon, Nov 12, 2012 at 1:48 PM, Daniel-Constantin Mierla
mailto:mico...@gmail.com>> wrote:
Hello,
On 11/12/12 10:02 AM, Kristofer Signer wrote:
Hello,
I'm trying to dig in to the kamailio XMLRPC interfa
de 408 and change the fields you want.
However, it may work to use a failure route and reset to-tag variable to
$null if the status code is 408 -- this is a matter of what mechanism
you use to write the accounting record.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipt
901 - 1000 of 7293 matches
Mail list logo
