At 10:28 AM 3/19/01 -0800, you wrote:
>I have performed failure analysis on corrosion failures associated with
>plated materials. Not all plating has uniform covering over the base
>material. The plated material has microscopic inclusions and even cracks in
>it surface which would expose the bas
Ocean Systems
-Original Message-
From: Terry Griner [SMTP:[EMAIL PROTECTED]]
Sent: Friday, March 16, 2001 12:55 PM
To: Multiple recipients of sslivesteam
Subject:RE: Silver soldering - Digest #397
Harry,
I had an Idea
At 03:54 PM 3/16/01 -0500, you wrote:
>Harry,
> I had an Idea while reading your e-mail. Could we "plate" the interior
of the boiler with copper?
>Terry Griner
Terry,
That's a novel idea, I've never heard of any such proposal before but I
don't know why it wouldn't work, unless there is some
Harry,
I had an Idea while reading your e-mail. Could we "plate" the interior of the boiler
with copper? I don't think it would take much, may be a few thousandths of an inch.
What do you think?
Terry Griner
Columbus Ohio USA
>>> [EMAIL PROTECTED] 03/15/01 02:58PM >>>
At 08:57 AM 3/15/01 -08
At 08:57 AM 3/15/01 -0800, you wrote:
>What are the concerns with using brass in a boiler?
>Steve Ciambrone
Steve,
Over time (sometimes not a very long time) the zinc will leach out of
brass leaving it pourous. The basic underlying concern is safety and the
soundness of the pressure vessel.
What are the concerns with using brass in a boiler?
Sincerely
Steve Ciambrone
Sr. Test Engineer
L-3 Ocean Systems
-Original Message-
From: Harry Wade [SMTP:[EMAIL PROTECTED]]
Sent: Thursday, March 15, 2001 7:00 AM
To: Multiple recipients of sslive
>From Harry's posting, first time I've heard about Small Scale Steam
Hobbyist magazine.
Just looked up their spot on Vance Bass' site.
Alas it's not cheap.
To Canada $45 for four issues ($24 in the US).
Which is C$ 70, plus tax and maybe mailing costs (?).
So about C$20+ an issue.
A bit too rich f