Jelle De Loecker wrote:
Stefan Monnier schreef:
If you add a swap area (of say 128MB), you should see much better
behavior since Linux will then be able to swap out pages of inactive
processes (and files in tmpfs) so as to keep more RAM for useful stuff.
I'm actually using a µSD card of 2
[EMAIL PROTECTED] wrote:
Johny Tenfinger napsal(a):
This can be only suppressed by use of headset.
False. Use AT%N0187 command.
OK, thanks, but use it how? I suppose, this is ant AT command, but I
use this by dialing application, so where should this command be used?
To use it easily and
William Kenworthy wrote:
Is there a dfu-util that can successfully backup an existing flash?
IIRC Harald Welte has pushed a patch for fixing this in uBoot. If you
update uBoot to git you should be able to do that...
BTW that method is slower than the one suggested above (since it copies
all the
Timo Jyrinki wrote:
2008/11/6 Michael Zanetti [EMAIL PROTECTED]:
What do you mean with working fine now? Are they working as they were
always
or are they now really working (no crashes on suspend or after some minutes
of
use)?
Working fine as in accelerometer using applications (I have
Robin Paulson wrote:
i've been trying to use pythm recently, but get an unsatisfied
dependency when i install it, and afterwards it won't run
i installed
http://downloads.tuxfamily.org/3v1deb/openmoko/python-mokoui2_0.1.0+svnr4342_armv4t.ipk
which appears to do nothing - pythm still
Leonti Bielski wrote:
I just have! And it's working! No more re-registering.
Thanks a lot!
In bug #1024 mickey and also mwester talked about the power consumption
of this change... Quoting one of the comments you can read:
While this increases power consumption, it will make a significant
Michael Shiloh wrote:
Marco Trevisan (Treviño) wrote:
Leonti Bielski wrote:
As I get it it is unfortunately impossible to upgrade the firmware at
home because of NDA - only Openmoko Inc. employee can do that.
I hope (but doubt it ) it will will be available to the public someday
Al Johnson wrote:
On Saturday 20 September 2008, Armin ranjbar wrote:
On Fri, 19 Sep 2008 13:33:49 +0430
Armin ranjbar [EMAIL PROTECTED] wrote:
Do you get headphone event when you insert one under /dev/input/event0 ?
mine returns nothing .
Can someone with om.2008+ do this test ?
cat
Tom Yates wrote:
i experimented yesterday with turning on the hardware echo cancellation,
and that worked for one call (allowed me to increase Speaker Playback
Volume to 117) but then things went back to being very echoey. so unless
i'm willing to have a minicom session at the beginning of
Armin ranjbar wrote:
the Mplayer on om2008 is directly connected to OSS not alsa, when i -ao
alsa it becomes 'very sensible' to loads , audio stop and resumes even
after each characters into terminals , strange ...
That's true... Using the oss output is really better here too.
--
Treviño's
Jim Ancona wrote:
Matt wrote:
I installed FSO milstone III on my FR, and left it on my desk at home.
When I came home, I noticed it was vibrating, over and over.
I had at least one missed call, I can't find a call log, so it may have
been more.
The phone kept vibrating until I had unlocked
Lorn Potter wrote:
Thomas Bertani wrote:
is it possible to rotate screen orientation of qtopia on the fr?
In 4.4 yes.
You're making us dreaming every time more :P
The waiting is trying :D
--
Treviño's World - Life and Linux
http://www.3v1n0.net/
Thomas Bertani wrote:
On my fr, with om 2008.8 update the boot failed a lot of times,then it
boots but when I remove battery to shutdown (for freeze) and then I
boot, I have to reboot it a lot of times for get it booting correctly,
it stops booting when serverx starts...
I got this too
Ole Kliemann wrote:
Unfortunately I cannot help you. Just can tell you that I have exactly
the same problem. I'm now waiting for the fix for the GSM-buzz, so I can
send the FR to my distributor and get both the GSM and GPS fixed. ;-)
Which distributor will give you them as warranty fixes?
--
Joachim Breitner ha scritto:
Hi,
Am Donnerstag, den 28.08.2008, 19:52 +0200 schrieb Christian Adams:
mv /usr/bin/apm /usr/bin/apm.o
creating /usr/bin/apm with following content:
- snip
#!/bin/sh
echo 1 /sys/module/glamo_mci/parameters/sd_idleclk
apm.o ${*}
echo 0
Mike Montour wrote:
Michael 'Mickey' Lauer wrote:
Once I know his this works, I'll be glad to add it to the framework. Can you
give me a dump of the AT commands?
With my carrier (Fido Prepaid in Canada) these notifications are sent as
USSD messages.
Only requests are USSD messages (in
Vimal Joseph ha scritto:
Hi,
The openmoko neo gta02 hangs frequently. I'v upgraded the software but
no use. It is happening mostly during calls, working with address
book, or any other software. Then I have to remove to battery to
reboot the system.
What can be the reason? any possible
Marco Trevisan (Treviño) wrote:
Hello, since the first time I've used my Freerunner I had serious
problems with the GTK 2007.2 version that is simply unusable to me.
I've to add to this crying list also the FSO. :(
Just tried the milestone 2, it's so nice, but it freezes like the GTK one
Marco Trevisan (Treviño) wrote:
This evening I've tried the FSO getting exactly the same problems so
I've figured that problem resides in Xglamo (or maybe in glamo itself?
:o) since both the two well-working distros I've tested (Qtopia and ASU)
are using different systems (Qtopia writes
Charles Hill wrote:
I've used it too, and I'd like to post some notes too (well, isn't there
a bugzilla?).
However I've found these bugs:
- Contacts unfilterable (The keyboard should pop-up like in ASU)
Do you mean by name? Because you can go into the Options menu and limit the
Joerg Reisenweber wrote:
Am Mo 28. Juli 2008 schrieb Marco Trevisan (Treviño):
I should say that my very first Freerunner experience was not so correct
since as soon as I've connected it to my wall charger for it's first
recharge, it powered on (also if I didn't press the power button
21 matches
Mail list logo