Hello,I would like to know if it's possible to run the OSPF protocol on PFSense via a plug-in (in this case where is it ?) or via a routing daemon like quagga or zebra (in this case how can i compile this demon on whith pfsense ? there is no compilation environement)
with regards
thomas
ya sorry, got it.. it switches to 9600 8n1.
On Thu, 2006-05-11 at 17:49 -0700, Derrick MacPherson wrote:
> I have a 4801 with laptop hard drive, and when i'm plugged into the
> console I see the soekris screens, but as soon as it's start to boot off
> the hdd, it turns to muck.. Is there a specifi
I have a 4801 with laptop hard drive, and when i'm plugged into the
console I see the soekris screens, but as soon as it's start to boot off
the hdd, it turns to muck.. Is there a specific setting I've missed or
not set that will enable me to admin this via the console?
--
I put on my robe and
Thanks, commited. Don't know about the system log issue, but at least
once that's resolved the openvpn log will be displayed correctly :)
--Bill
By default OpenVPN syslog facility is LOG_DAEMON. Log facility can only
be changed at compile time. See discussion on that matter on m0n0wall
mai
On May 10, 2006, at 6:48 PM, [EMAIL PROTECTED] wrote:
At 12:36 PM 5/10/2006, Frederick Page wrote:
Same here. I also like to take advantage of the "PC functionality"
with my Soekris net4801.
I think I might follow the suggestions on this page:
http://www.gizmolabs.org/~ecronin/w/Main/PfSens
On 5/11/06, D.Pageau <[EMAIL PROTECTED]> wrote:
On 4/26/2006 10:03 AM, Henk van Kester wrote:
> It looks like the OPENVPN log is not working? (Beta3)?
I confirm on BETA4 log are in system.log instead of openvpn.log
I've also found a cut&paste error in diag_logs_openvpn.php where
-
+
Thanks
Not in 1.0. Sorry.
On 5/11/06, Guilherme Oliveira <[EMAIL PROTECTED]> wrote:
Is it possible ?
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
At 01:09 AM 5/11/2006, Eugen Leitl wrote:
On Wed, May 10, 2006 at 03:32:27PM -0700, [EMAIL PROTECTED] wrote:
> I'll probably do some testing with my CF setup and if it works, go buy the
> microdrive.
Hey Bill, nice to see you here. How much is the microdrive?
How many MByte/s does it?
Yes, I
On 4/26/2006 10:03 AM, Henk van Kester wrote:
It looks like the OPENVPN log is not working? (Beta3)?
I confirm on BETA4 log are in system.log instead of openvpn.log
I've also found a cut&paste error in diag_logs_openvpn.php where
-
+
---
Is it possible ?
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Something is telling it to renew every 1800 seconds. Is this the
value that the DHCP Server is set to?
On 5/11/06, Henk van Kester <[EMAIL PROTECTED]> wrote:
Hello,
Why does are PFsense machines (beta 3 and 4) trying to renew there "static"
Internet IP address" every 14 minutes ? Is it poss
On 5/11/06, Tommaso Di Donato <[EMAIL PROTECTED]> wrote:
Thank you very much, Bill.
I'm sorry, I did this procederure: updated the box, rebooted, did a
cvsup_current, the built the new iso. Did I missed a step?
Thanx again!
Tom
That should have worked but its hard to say what went wrong. I'll
Thank you very much, Bill.I'm sorry, I did this procederure: updated the box, rebooted, did a cvsup_current, the built the new iso. Did I missed a step?Thanx again!TomOn 5/11/06,
Bill Marquette <[EMAIL PROTECTED]> wrote:
Sounds like you upgraded the box, but not the pfSense developmentcheckout. F
Hello,
Why does are
PFsense machines (beta 3 and 4) trying to renew there "static"
Internet IP address" every 14 minutes ? Is it possible to shutdown/change this
process? Is it possible to do this check ones a day (or better
manual?)
11-05-2006 15:20:46 Daemon.Info 192.168.0.254 May 1
Sounds like you upgraded the box, but not the pfSense development
checkout. Follow the full directions for building an update and you
should get a beta4 tarball.
--Bill
On 5/11/06, Tommaso Di Donato <[EMAIL PROTECTED]> wrote:
Hi guys!
Just a question: I'm compiling a modified version of pfSens
Hi guys!Just a question: I'm compiling a modified version of pfSense, using DevEd. I just upgraded with the latest update (beta4), but when I build the new ISO, the reported version is still Beta2. Am I loosing something? Have I to issue some commands about releng?
TIATommaso
On Wed, May 10, 2006 at 03:32:27PM -0700, [EMAIL PROTECTED] wrote:
> I'll probably do some testing with my CF setup and if it works, go buy the
> microdrive.
Hey Bill, nice to see you here. How much is the microdrive?
How many MByte/s does it?
--
Eugen* Leitl http://leitl.org";>leitl http:/
17 matches
Mail list logo
