Keith Steensma wrote:
I'm using a 500 mHz Celeron w/128M RAM with a Realtek 8139 chipset as
192.168.254.1 LAN interface and a 3Com 3C905B as 192.168.1.100 WAN
interface. The hardware does work
Can you ping the WAN iface from the lan?
Can you ping an external host(ip) from the pfsense box?
On 5/14/08, Mogamat Abrahams [EMAIL PROTECTED] wrote:
Keith Steensma wrote:
I'm using a 500 mHz Celeron w/128M RAM with a Realtek 8139 chipset as
192.168.254.1 LAN interface and a 3Com 3C905B as 192.168.1.100 WAN
interface. The hardware does work
Can you ping the WAN iface from the lan?
Chris,
I noticed there were two images in this directory. Besides one
being a day newer than the other what is the difference and should I
pick one over the other? Thanks.
Wade B
On Mon, May 12, 2008 at 6:01 PM, Chris Buechler [EMAIL PROTECTED] wrote:
On Mon, May 12, 2008 at 7:56 PM,
I recently posted asking for help because I had an Intel Pro 1000 VT NIC
that wasn't working.
Chris kindly provided a build on FreeBSD 6.3 and the Intel works great
however I've now found that it doesn't like the embedded Broadcom NetXtreme
Dual Gigabit BCM5722.
Is there anybody that can
Good morning all,
I am wondering what I should see on the queues status page when a
SIP-AIX2 call is placed. I used the traffic shaper wizard, the Trixbox sits
on it's own network and was specified in the wizard config. I have had some
voice quality issues on my AIX2 trunk to VOIPstreet
Good afternoon,
Yesterday I re-imaged my primary PF box with 1.2RC2 and then
upgraded to 1.2-RELEASE. My RRD graphs are broken and the RRD page says look
at the log. Upon looking at the logs I see the following;
May 14 13:52:27 php: /status_rrd_graph_img.php: Failed to create graph with
why didnt you go straight to 1.2-RELEASE?
From: [EMAIL PROTECTED]
To: support@pfsense.com
Date: Wed, 14 May 2008 13:55:20 -0700
Subject: [pfSense Support] RRD errors
RRD errors
Good afternoon,
Yesterday I re-imaged my primary PF box with 1.2RC2 and then upgraded
to
Because when I removed my Atheros wifi card PF was unable to remove an line
in the config,
After that anything I tried to do on the console resulted in an XML
error and all I had was the RC2 CD. Short answer I killed the box and had
limited tools. Is this an easy answer/fix? If not and I
Hi All,
I'm loving PFSense and have just deployed the embedded version on some ALIX
boards for several SOHO users and in the office. My thanks to everyone who has
supported/worked on the project.
My question is how to configure the the firewall to allow for site to site
IPSec tunnels at the
Waiting Chris's answer, I tell you I've used the
latest one (see date) to do a full update on a box
from 1.2rc4 to this special build. I don't know
further details, but it seems to work at the moment
(note that I haven't done extensive tests yet, so
surprise might be behind the corner).
Bye!
---
On Wed, May 14, 2008 at 5:34 AM, Adam Costello
[EMAIL PROTECTED] wrote:
There's good news and bad news.
Good news: That install fixed the issue with the Intel Pro 1000VT and when I
stick the cable link status says UP
Bad News: The onboard Broadcom NetXtreme Dual Gigabit NIC is not working.
Not sure if this is resolved, I was reminded today of the BIOS reports of the
system status - especially the voltages, a failing
power supply might also cause this problem, check the voltages from the boot
BIOS.
Do let us know the outcome.
Kind regards
David Hingston
- Original Message
12 matches
Mail list logo
