Hi,
I am setting up a pfsense box to replace my aging Sonicwall SOHO, it has 4
NIC's, WAN, LAN, OPT1, OPT2. I have purchased the pfSense book and gave it a
read through before starting.
Configuration has been going well for WAN, LAN, VPN's and port forwarding into
internal hosts.
The one
Op 29 dec 2009, om 20:05 heeft Mark Street het volgende geschreven:
Hi,
I ran nmap from remote servers and sure enough port 25 is not accessible. I
set rules on the WAN to allow SMTP to pass through to the external address on
OPT1 and still no pass. Running netstat on the mail host
Hi,
I have two rules on the WAN interface to try to get it through
The first rule allows all traffic to pass to the mailserver IP
proto *, Source *, Port *, Destination $MAILSERVERIP, Port * Gateway *
I wrote that one after I wrote this one...
Proto *, Source *, Port *, Destination
Op 29 dec 2009, om 21:03 heeft Mark Street het volgende geschreven:
Hi,
I will do some more investigation... funny thing is I could not find anything
in the firewall logs on denying port 25.
What might be happening here is if the gateway on the bridged computer is not
set correctly it can
Hi,
This was my thought as stated in my original post. I thought I read something
in the book about setting the gateway on the bridged machine to the pfsense box
instead of the ISP gateway because the traffic from the bridged machine would
not hit the state tables.
More investigation after
On Tue, Dec 29, 2009 at 4:19 PM, Mark Street mstr...@alliancemed.org wrote:
Hi,
This was my thought as stated in my original post. I thought I read
something in the book about setting the gateway on the bridged machine to the
pfsense box instead of the ISP gateway because the traffic from
Congratulations to the pfsense team!!! Version 1.2.3 is an excellent
release, and well worth upgrading to.
How to instructions are posted at http://nw-ds.com/ALIX_with_IDE_HDD
-
To unsubscribe, e-mail:
The reason it works out of the box on ALIX/Soekris is because the
default network adapter names for those are vr0/vr1 on both platforms so
those are in the default configuration.
Jim
Jim,
I was experimenting with the pfSense embedded, but it does indeed use
the serial console to show