Uhmm, I see what you mean.
Well, I tried with WRAP 2C and the trick is:
- configure as normal, with LAN as ethernet nic and WAN as wireless;
- give an IP address to both in the same network;
- bridge LAN and WAN, you have to change IP because as soon you "save"
the GUI is disconnected...after that
Hello Giorgio
I 'd like to have the ath0 on the LAN interface, but it doesn't allow
me to configure the LAN to hostap mode, and with only 2 nics, there's
not opt1 :-(
Maybe that is not how the wireless nics are meant to be used? I am
going to try bridging the single ath0 now, maybe that's
Fixed in CVS. Thanks.
On 8/4/05, Giorgio Ducci <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I'm testing 0.73.6 on a Wrap board with an Atheros mPCI and when I
> enable interface "OPT1" (ath0) and I click on "SAVE" I get a new page
> with this on the header:
>
> Warning: fopen(/tmp//sbin/ifconfig_wirele
Hi,
I'm testing 0.73.6 on a Wrap board with an Atheros mPCI and when I
enable interface "OPT1" (ath0) and I click on "SAVE" I get a new page
with this on the header:
Warning: fopen(/tmp//sbin/ifconfig_wireless): failed to open stream:
No such file or directory in /etc/inc/interfaces.inc on line 4
