DataLocker, the AFFORDABLE off site backup
solution!
-Original Message-
From: cbuech...@gmail.com [mailto:cbuech...@gmail.com] On Behalf Of
Chris Buechler
Sent: Monday, February 02, 2009 9:27 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] Configuration Questions
On Mon, Feb 2
On Mon, Feb 2, 2009 at 8:31 AM, Joseph Hardeman wrote:
>
> What sort of code change would I make to get STP operating properly? Can
> you send me an example or where I could look to figure it out? I will be
> installing the new pfSense firewall this week so I can set that up then,
> once I move
Hi Chris,
Ok, I understand that we can not use Multi-Wan and Load Balancing.
Bridging can be made to work with failover but requires some manual
hacking to bring up and down the bridge appropriately, or you could
probably make an easy code change to make STP operate properly in
coordination w
On Sun, Feb 1, 2009 at 5:09 PM, Joseph Hardeman wrote:
> Hi Everyone,
>
> I have a question that I am hoping someone will be able to help me with.
>
> I am about to migrate to a network that has two circuits to the same
> provider with BGP on each circuit so if one circuit goes down we will be
> a
Hi Everyone,
I have a question that I am hoping someone will be able to help me with.
I am about to migrate to a network that has two circuits to the same
provider with BGP on each circuit so if one circuit goes down we will be
able to keep our traffic flowing. Our pfSense firewall is setup i
