Hello list, My pfsense box is a ALIX 2d3 Board. version pfsense is 1.2.2
My porblem is, that i have a lot of in/out errors on the Wlan interface. I tried all combinations of rxantenna, txantenna and diversity. But it is not getting better. Another thing is, when i set txantenna=0, rxantenna=1 and make then for example a refresh of the "status-interface-site", the system changes rxantenna to 2. see attached some more information: dev.ath.0.%desc: Atheros 5212 dev.ath.0.%driver: ath dev.ath.0.%location: slot=12 function=0 dev.ath.0.%pnpinfo: vendor=0x168c device=0x001b subvendor=0x168c subdevice=0x2062 class=0x020000 dev.ath.0.%parent: pci0 dev.ath.0.smoothing_rate: 95 dev.ath.0.sample_rate: 10 dev.ath.0.countrycode: 0 dev.ath.0.regdomain: 0 dev.ath.0.slottime: 9 dev.ath.0.acktimeout: 48 dev.ath.0.ctstimeout: 48 dev.ath.0.softled: 0 dev.ath.0.ledpin: 0 dev.ath.0.ledon: 0 dev.ath.0.ledidle: 270 dev.ath.0.txantenna: 0 dev.ath.0.rxantenna: 2 dev.ath.0.diversity: 1 dev.ath.0.txintrperiod: 5 dev.ath.0.diag: 0 dev.ath.0.tpscale: 1 dev.ath.0.tpc: 0 dev.ath.0.tpack: 63 dev.ath.0.tpcts: 63 dev.ath.0.fftxqmin: 2 dev.ath.0.fftxqmax: 50 dev.ath.0.monpass: 24 stifflerwall:~# ifconfig -v ath0 ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether xx:xx:xx:xx:xx:xx inet6 fe80::280:48ff:fe60:711a%ath0 prefixlen 64 scopeid 0x4 media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap> status: associated ssid stiffler_wlan channel 4 (2427 Mhz 11g) bssid xx:xx:xx:xx:xx:xx authmode WPA1+WPA2/802.11i privacy MIXED deftxkey 3 TKIP 2:128-bit TKIP 3:128-bit powersavemode OFF powersavesleep 100 txpower 31.5 txpowmax 20.0 rtsthreshold 2346 fragthreshold 2346 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11a 7 roam:rate11a 12 roam:rssi11b 7 roam:rate11b 1 roam:rssi11g 7 roam:rate11g 5 pureg protmode OFF -ht -htcompat -ampdu ampdulimit 8k ampdudensity - -amsdu -shortgi htprotmode RTSCTS -puren wme burst -ff -dturbo -hidessid apbridge dtimperiod 1 doth inact bintval 100 AC_BE cwmin 4 cwmax 6 aifs 3 txopLimit 0 -acm ack cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm ack cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm AC_VI cwmin 3 cwmax 4 aifs 1 txopLimit 94 -acm ack cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm AC_VO cwmin 2 cwmax 3 aifs 1 txopLimit 47 -acm ack cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm WLAN interface (ath0) Status associated MAC address xx:xx:xx:xx:xx:xx Media autoselect mode 11g <hostap> Channel 4 SSID stiffler_wlan In/out packets 43127/50993 (3.77 MB/20.57 MB) In/out errors 125590/595 Collisions 0 Bridge (bridge0) learning Thanks for any ideas! Greatings Michael --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org