Its funny you should mention this as I am in the middle of doing exactly
the same thing with an ALIX board from
http://www.yawarra.com.au/hw-alix2.php
I installed the 2GB CF card in a card reader on my PC and booted off the
CD and installed pfSense onto the card.
I then inserted the card in
On Thu, Jul 24, 2008 at 09:31:29PM +1000, digger wrote:
The end result is I can confirm that the full version does happily run
on a CF card and ALIX board.
If this is a consumer flash device mounted r/w probability of failure
will go up considerably after half a year, or so.
Unfortunately,
Am Donnerstag, den 24.07.2008, 13:53 +0200 schrieb Eugen Leitl:
If this is a consumer flash device mounted r/w probability of failure
will go up considerably after half a year, or so.
Unfortunately, there's no CF card with wear-levelling hardware as far
as I know. This is very different
Heribert Tockner [EMAIL PROTECTED] ha escrito:
Am Donnerstag, den 24.07.2008, 13:53 +0200 schrieb Eugen Leitl:
If this is a consumer flash device mounted r/w probability of failure
will go up considerably after half a year, or so.
Unfortunately, there's no CF card with wear-levelling hardware
On Thu, Jul 24, 2008 at 7:53 AM, Eugen Leitl [EMAIL PROTECTED] wrote:
On Thu, Jul 24, 2008 at 09:31:29PM +1000, digger wrote:
The end result is I can confirm that the full version does happily run
on a CF card and ALIX board.
If this is a consumer flash device mounted r/w probability of
to proactively pick up errors?
Kind regards
David Hingston
- Original Message -
From: Chris Buechler [EMAIL PROTECTED]
To: support@pfsense.com
Sent: Friday, July 25, 2008 4:05 AM
Subject: Re: [pfSense Support] alix (any verison) on a CF harddisk - full
version ?
On Thu, Jul 24, 2008
On Wed, Jul 23, 2008 at 4:23 PM, Michel Servaes [EMAIL PROTECTED] wrote:
I want to buy an Alix (or Wrap), and plug in a CF Harddisk.
Would it be possible to push a full version (instead of the embedded ?).
Yep. You have to use grub (check the box on the boot loader screen) to
boot full
