is an Atlas Accelerator Company
-Original Message-
From: Nathan Eisenberg [mailto:nat...@atlasnetworks.us]
Sent: Monday, January 05, 2009 5:32 PM
To: 'support@pfsense.com'
Subject: RE: AW: [pfSense Support] em0: Watchdog timeout -- resetting
Any thoughts on a next step in troubleshooting? I'm
: AW: [pfSense Support] em0: Watchdog timeout -- resetting
Fuchs, Martin wrote:
And perhaps try to set the port speed in pfsense AND the switch, e.g.
1000MBit FD...
Sometimes this helps, too
Once you start setting port speeds to fix rates and duplex you're going
down a long and slippery slope
Fuchs, Martin wrote:
And perhaps try to set the port speed in pfsense AND the switch, e.g.
1000MBit FD...
Sometimes this helps, too
Once you start setting port speeds to fix rates and duplex you're going
down a long and slippery slope, it's best to avoid it unless there's a
proven good
-
Von: Paul Mansfield [mailto:it-admin-pfse...@taptu.com]
Gesendet: Montag, 5. Januar 2009 12:01
An: support@pfsense.com
Betreff: Re: AW: [pfSense Support] em0: Watchdog timeout -- resetting
Fuchs, Martin wrote:
And perhaps try to set the port speed in pfsense AND the switch, e.g.
1000MBit FD
On Mon, Jan 5, 2009 at 2:02 PM, Nathan Eisenberg
nat...@atlasnetworks.us wrote:
Admittedly, I did not expect to run into hardware/driver issues when I was
buying these NICs. :( In fact, that's exactly the reason I
went with Intel HW in the first place.
Usually that's an accurate
...@gmail.com [mailto:cbuech...@gmail.com] On Behalf Of Chris
Buechler
Sent: Monday, January 05, 2009 5:14 PM
To: support@pfsense.com
Subject: Re: AW: [pfSense Support] em0: Watchdog timeout -- resetting
On Mon, Jan 5, 2009 at 2:02 PM, Nathan Eisenberg
nat...@atlasnetworks.us wrote:
Admittedly, I did
On Mon, Jan 5, 2009 at 8:32 PM, Nathan Eisenberg
nat...@atlasnetworks.us wrote:
Any thoughts on a next step in troubleshooting?
As I suggested earlier in this thread:
http://doc.pfsense.org/index.php/Policy_on_FreeBSD_issues
Most frequently these issues are driver bugs. We do not have any
And perhaps try to set the port speed in pfsense AND the switch, e.g. 1000MBit
FD...
Sometimes this helps, too
Regards,
Martin
-Ursprüngliche Nachricht-
Von: apiase...@midatlanticbb.com [mailto:apiase...@midatlanticbb.com]
Gesendet: Sonntag, 4. Januar 2009 04:17
An:
