...@maxim-ic.com> wrote:
>
> Excellent! I had a loose cable to the sensor.
>
>
>
> Diana****
>
> ****
>
> *From:* elp...@gmail.com [mailto:elp...@gmail.com] *On Behalf Of *Andrey
> Filippov
> *Sent:* Tuesday, October 11, 2011 5:01 PM
> *To:*
@support.elphel.com
Subject: Re: [Elphel-support] Camera Issues
Diana,
until the recent bug fix I mentioned in one of the previous posts, the camera
without the sensor would not complete the startup sequence with
autocampars.php getting stuck trying to initialize the non-existent sensor. In
that condition
>
> *From:* elp...@gmail.com [mailto:elp...@gmail.com] *On Behalf Of *Andrey
> Filippov
> *Sent:* Tuesday, October 11, 2011 5:19 PM
> *To:* Diana Carrigan; support-list@support.elphel.com
> *Cc:* Robert Kuzmak
>
> *Subject:* Re: [Elphel-support] Camera Issues
>
>
: [Elphel-support] Camera Issues
Diana,
Do you have 10369 board that you can watch camera boot messages on some
terminal emulator over the serial port? With that you would notice that
immediately - failure to dtect sensor and autocampars.php getting stuck.
Andrey
On Tue, Oct 11, 2011 at 5:12 PM, Diana
m
> *Cc:* Alexandre Poltorak; Robert Kuzmak
>
> *Subject:* Re: [Elphel-support] Camera Issues
>
> ** **
>
> Diana,
>
> if you update the software from the CVS, it has the bug fixed. The bug
> preventing booting camera if no sensor was detected - autocampars.php was
it just says it can't establish a connection to the server ..
Thanks,
Diana
From: Alexandre Poltorak [mailto:po...@alsenet.com<mailto:po...@alsenet.com>]
Sent: Tuesday, October 11, 2011 4:47 PM
To: Diana Carrigan
Cc: Robert Kuzmak; elphel support-list
Subject: Re: [Elphel-support] Camer
Elphel353 /root]761#
>
> ** **
>
> ** **
>
> I removed all “history” from my FireFox browser. I’m now back to my
> original problem, where it just says it can’t establish a connection to the
> server ..****
>
> ** **
>
> Thanks,
>
> ** **
>
> Diana*
: Re: [Elphel-support] Camera Issues
In the PS you sent me lighttpd (the web server on the camera) is not started.
Seems like you just booted the camera and it have not yet started the webserver.
So please retry "ps" 2 minutes after the camera boot.
Alexandre
_
my original
problem, where it just says it can’t establish a connection to the server ..
Thanks,
Diana
From: Alexandre Poltorak [mailto:po...@alsenet.com]
Sent: Tuesday, October 11, 2011 4:47 PM
To: Diana Carrigan
Cc: Robert Kuzmak; elphel support-list
Subject: Re: [Elphel-support] Camera Issu
k"
| À: "Diana Carrigan"
| Cc: "Robert Kuzmak" , "elphel
| support-list"
| Envoyé: Mercredi 12 Octobre 2011 00:46:40
| Objet: Re: [Elphel-support] Camera Issues
| Diana,
| Could you please connect over telnet and send the output of "ps"
| command here.
redi 12 Octobre 2011 00:31:31
| Objet: Re: [Elphel-support] Camera Issues
| Diana,
| It may be some proxy settings in your browser.
| Regards,
| Alexandre
| ___
| Support-list mailing list
| Support-list@support.elphel.com
| http://support.elphel.co
Diana,
It may be some proxy settings in your browser.
Regards,
Alexandre ___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
leg K Dzhimiev
Sent: Tuesday, October 11, 2011 3:24 PM
To: Diana Carrigan
Cc: Robert Kuzmak; elphel support-list
Subject: Re: [Elphel-support] Camera Issues
Diana,
Most likely there's a PC with the same address in the LAN with your camera
(could be yours).
"IT WORKS" is the default
Diana,
Most likely there's a PC with the same address in the LAN with your camera
(could be yours).
"IT WORKS" is the default Apache web server's index.html that runs on that
PC.
Best regards,
Oleg
On 11 October 2011 14:08, Diana Carrigan wrote:
> Hello,
>
> ** **
>
> When I type in http:/
Hello,
When I type in http://192.168.0.9 into my web browser..I get the following
message:
IT WORKS!
This is the default web page for this server.
The web server software is running but no content has been added yet.
Why am I seeing this? I can no longer do anything with my camera (as I was
b
15 matches
Mail list logo
