--- R Del [EMAIL PROTECTED]> wrote:
> Understood.
>
> > If the oil contains salts or semi-soluble fatty
> acids, distillation is
> > even more difficult.
>
> Can you expand on this point?
As the percentage of water in the solution decreases
(its molar fraction) its vapor pressure will cont
I built up a vac/boiler from a 40 gallon water heater.
http://www.zerotec.com/vegenergy/dewater/
Added the option to introduce dry air (nitrogen is what I happen to have a
few tanks of) via the dip tube, to help agitate.
Right now it runs down to around 23.5" vac, and you can hear the boilin
In order to remove water content from waste fryer oils, I have been
considering a combined heat/vacuum system.
I have been wondering if a standard electric water heater vessel can
handle a vacuum of ~24" of mercury vacuum...anyone tried this yet?
The boiling point of water is around 140degF
ter Koole
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, May 15, 2005 1:23 AM
Subject: Re: [Biofuel] Dewatering WVO with vacuum and heat
You can find one from an old fridge...
The compressor. Black thingie...
Mine cort me about 3$ at the
Thank you, I'll have a look round.
Met dank en vriendelijke groet,
Pieter Koole
- Original Message -
From: "des" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, May 14, 2005 1:36 PM
Subject: Re: [Biofuel] Dewatering WVO with vacuum and
You can find one from an old fridge...
The compressor. Black thingie...
Mine cort me about 3$ at the junk yard.
You can use it for sucking and pumping...
Teoman
-- original message --
Subject:Re: [Biofuel] Dewatering WVO with vacuum and heat
From: Pieter Koole <[EMAIL PROTECTED]>
Where does one find a vacuumpump ?
Met dank en vriendelijke groet,
Pieter Koole
They are used regularly in garages that work on airconditioning systems
in cars, also used in home airconditioning systems, refrigerators,
freezers... They are used to remove water from the refrigerant syste
Where does one find a vacuumpump ?
Met dank en vriendelijke groet,
Pieter Koole
- Original Message -
From: "R Del Bueno" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, May 14, 2005 2:15 AM
Subject: Re: [Biofuel] Dewatering WVO with vacuum and heat
The 40 gallon electric water heater held 26" of vacuum all afternoon.
Will post details of actual dewatering soon.
-Rob
___
Biofuel mailing list
[EMAIL PROTECTED]
http://wwia.org/mailman/listinfo/biofuel
Biofuel at Journey to Forever:
http://journeyt
water.
>
>
>
Of course. I new that. Stupid me !
Sorry.
Pieter Koole
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, May 13, 2005 3:24 AM
Subject: Re: [Biofuel] Dewatering WVO with vacuum and heat
>
>
>
>
> Norma
: [EMAIL PROTECTED]
t.nl>cc:
Sent by: Subject: Re: [Biofuel]
Dewatering WVO with
ecause I have been thinking
on this subject also ).
Is there a table or so, where one can find at what pressures water boils ?
Pieter Koole
Netherlands
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 12, 2005 11:48 PM
Subject: Re:
Rob, I think a water heater will stand the vacuum easily since it is at the
most 15 PSI compression on the steel, compared to 150 or more in tension
when in normal use. Not sure it will save energy. Vapor pressure at 140 F for
water is 150 mm Hg or equiv of 24 in vacuum but you will need
dustry in
> general and
> to third world countries as refined yellow grease for edible purposes.
>
> Todd Swearingen
>
> - Original Message -
> From: "Christopher Tan" <[EMAIL PROTECTED]>
> To:
> Sent: Saturday, July 19, 2003 8:28 PM
>
r Tan" <[EMAIL PROTECTED]>
To:
Sent: Saturday, July 19, 2003 8:28 PM
Subject: RE: [biofuel] dewatering WVO
> Hi Keith:
>
> Any idea what the recyclers do with WVO? I talked to a couple of
restaurants
> and found out that there are people who buy their WVO. The restaurants
>
Yes, and then run it through a water separator filter or two on its way
to the engine, if you want to do a more thorough job. Our G3 SVO Max
kit uses this approach
...gravity settle only, followed by a trip through a heated filter with
two stage filtration and water separation.
Edward Beggs
N
L PROTECTED]
=>Sent: Saturday, July 19, 2003 9:56 PM
=>To: biofuel@yahoogroups.com
=>Subject: Re: [biofuel] dewatering WVO
=>
=>
=>>Hey Kieth-
=>>
=>>Which restaurants did you learn not to eat at, and why?
=>>
=>>Best Regards,
=>>
=>>John
Brent,
100*C is the boiling point for water. To get rid of water by the boiling
method not only do you have to expend massive amounts of energy, but the
water wil inevitably atomize and stay mixed with oil to some degree, even if
you boil the beejeebers out of it.
Your best bet is to heat the oi
>Hey Kieth-
>
>Which restaurants did you learn not to eat at, and why?
>
>Best Regards,
>
>John D, in Ohio
Hello John
As a general rule we've found the cheaper the restaurant the worse
the WVO - more abused, cooked longer and probably hotter before being
renewed, higher FFA levels. Others say
Hey Kieth-
Which restaurants did you learn not to eat at, and why?
Best Regards,
John D, in Ohio
~
>I read the information on dewatering the WVO, but when I was heating
>the oil I noticed that when it was taken off the heat and pour
>I read the information on dewatering the WVO, but when I was heating
>the oil I noticed that when it was taken off the heat and poured off,
>that there was water settled on the bottom. Can this be a way to
>dewater more quickly? Just heat the oil to 100 deg. C and then pour
>the oil off the top?
21 matches
Mail list logo