On Thursday 27 March 2008 11:36:04 Luke Plant wrote:
> Hi all,
>
> In the course of getting serious about learning Bible verses and
> passages, I decided I needed a method of choosing Bible verses and
> putting together schemes, and that other people could benefit from
> this. I couldn't find much
Nice job Chris. A while back I wrote an example RSS feed for daily
devos for SWORDWeb. It was my first try and the markup is likely all
wrong. It can be found here, with source:
http://crosswire.org/study/examples/
the rss.jsp and rss.jsp.txt
Chris, maybe you can use it to make a nice one.
Ok, so don´t you know where could be a problem? because it is taking so
much time and doing nothing at all. It just generates 4 files nt,
nt.vss, ot, ot.vss.
thanks.martin
___
sword-devel mailing list: sword-devel@crosswire.org
http://www.crosswire.or
It depends on your system and the Bible, but it shouldn't take more than
a minute. It should give constant feedback about what it's doing, too.
martin wrote:
> Do you know how long it takes to convert a Bible from imp into sword
> with imp2vs? because I just have open a command line and it is ju
jhphx wrote:
> The link Chris provided does not work for me as a live bookmark in
> Firefox and is not found by Sage in Firefox.
Both of these now work.
Jerry
___
sword-devel mailing list: sword-devel@crosswire.org
http://www.crosswire.org/mailman/li
In a message dated 3/27/2008 7:03:27 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Ok, mea culpa. That was the last invalid error that the W3C validator
was complaining about, but everything worked fine for me, so I ignored it.
I fixed the error (and fixed a small stability issue
Do you know how long it takes to convert a Bible from imp into sword
with imp2vs? because I just have open a command line and it is just
showing me Mode 1 for more than hour. Is it ok?
thank you so much
martin
___
sword-devel mailing list: sword-devel@
icudt38.dll is in the same place where you found the compiled
imp2vs.exe: http://crosswire.org/ftpmirror/pub/sword/utils/win32/
It's not actually the same version as comes with the most recent release
of the SWORD Project for Windows, but if you're running a beta of
1.5.10, you'll need the same
martin wrote:
> Hey, can somebody tell me how to convert bible in imp format into sword
> module? I am running imp2vs utility but it shows me an error cannot find
> ICUDT38.DLL. Do you know where is a problem?
>
ICU is a system to deal with unicode. It is part of normal linux
installations, bu
[EMAIL PROTECTED] wrote:
> I'm using Internet Explorer for my feed reader. And I get 'Feed Code
> Error', with this message:
>
> Reference to undefined entity 'copy'.
> Line: 139 Character: 324
>
> ![]()
src="http://www.crosswire.org/sword/images/news/books.gif">
;
> We are pleased
Martin,
On Thu, Mar 27, 2008 at 5:14 PM, martin <[EMAIL PROTECTED]> wrote:
> Hey, can somebody tell me how to convert bible in imp format into sword
> module? I am running imp2vs utility but it shows me an error cannot find
> ICUDT38.DLL. Do you know where is a problem?
I believe that you can r
Luke,
On Thu, Mar 27, 2008 at 4:41 PM, Luke Plant <[EMAIL PROTECTED]> wrote:
> On Thursday 27 March 2008 17:10:35 jonathon wrote:
> > On Thu, Mar 27, 2008 at 10:36 AM, Luke Plant wrote:
> > > I'm not done, and I've realised I could use some help in filling
> > > it out with actual Bible verse
Hey, can somebody tell me how to convert bible in imp format into sword
module? I am running imp2vs utility but it shows me an error cannot find
ICUDT38.DLL. Do you know where is a problem?
thank you
martin
___
sword-devel mailing list: sword-devel@cro
On Thursday 27 March 2008 17:10:35 jonathon wrote:
> On Thu, Mar 27, 2008 at 10:36 AM, Luke Plant wrote:
> > I'm not done, and I've realised I could use some help in filling
> > it out with actual Bible verses. The main help I'm looking for
> > is verses to be added to the YAML
>
> I'd suggest
David Haslam <[EMAIL PROTECTED]> writes:
> Sometime since I installed it in January, the MCheyne tab has
> disappeared from the displayed modules. This is still the situation
> even after I remove the module and re-install it. Yet it is listed
> and ticked in the Show/Hide modules dialogue.
> Any
David Haslam wrote:
> Of more general use, for Firefox users is the GreaseMonkey script called
> http://zoehep.xent.com/~bsittler/rsspanel.html RSS Panel X .
>
> This already works fine for these Nabble forums. And it is configurable.
>
The link Chris provided does not work for me as a live bo
Of more general use, for Firefox users is the GreaseMonkey script called
http://zoehep.xent.com/~bsittler/rsspanel.html RSS Panel X .
This already works fine for these Nabble forums. And it is configurable.
Best regards,
David Haslam
Chris Little-2 wrote:
>
> I'm a horrible RSS addict mysel
David Haslam wrote:
> The navigator pane for the Persian Bible Atlas does not display>
correctly as Farsi script in my Windows XP machine, even though Farsi
> text in relevant Bible modules and in the Atlas pages does display OK.
My recommendation for RtoL languages is to use BD which r
Hi Luke,
40 years ago I found the
http://www.navigators.org/us/resources/illustrations/items/Topical%20Memory%20System
Navigators' Topical Memory System very valuable for memorizing Scripture
verses.
In the current issue of the http://www.banneroftruth.org/ Banner of Truth
magazine, there is
Chris,
Would you burn copies before sending them back? Or at least make a
recursive listing. I am curious whether the JSword/BD disk is also an
old version, whether it actually includes the complete source, whether
it is implemented in such a way that it will come back to bite us with
support q
Hello Karl,
Sometime since I installed it in January, the MCheyne tab has disappeared
from the displayed modules.
This is still the situation even after I remove the module and re-install
it.
Yet it is listed and ticked in the Show/Hide modules dialogue.
Any thoughts on how to remedy this bug?
a
--
View this message in context:
http://www.nabble.com/Persian-Bible-Atlas---font-or-display-issue-for-naviagtor-tp16332196p16332196.html
Sent from the SWORD Dev mailing list archive at Nabble.com.
___
sword-devel mailing list: sword-devel@crosswire
Thanks a lot for your effort to bring the Word of God closer to the Linux
users! God bless you!
- Original Message
From: peter <[EMAIL PROTECTED]>
To: SWORD Developers' Collaboration Forum
Sent: Thursday, March 27, 2008 7:07:11 PM
Subject: Re: [sword-devel] Romanian Translation
I presu
Manfred,
You are now the proud owner of the Jira entry for MacSword. You
should be able to administer any settings for it, but feel free to ask
me for help if you need it.
DM
Manfred Bergmann wrote:
> DM.
>
> Please change the owner to me.
> Then we will see in which way we will use it.
>
>
Manfred,
To answer both your emails here:
I never got the impression you were being rude. If you have a simple ~5
line example which demonstrates the failure, please add the bug to jira
and I'll have a look.
You can set the locale of individual VerseKey objects with
VerseKey::setLocale. You
I presume you use Linux then and know your way around to a degree?
You need to do following things
1) subscribes to the gnomesword developers list
2) install gtranslator
3) install svn
4) download the current code for gnomesword
5) get going...
additionally you might want to get anjuta and compi
gosu gosu <[EMAIL PROTECTED]> writes:
> I would like to translate the GnomeSword UI into Romanian.
> Where to begin?
Hi. If you'll let me know what your SourceForge name is, I'll add you
to the set of folks with SVN access. Then you should get on the
gnomesword-developers mailing list, and other
martin wrote:
> I would like to translate sword into slovak language and also I would
> like to make a slovak bible modules, how can I do that? is there any
> software to convert txt files into sword module files or how can I do that?
> martin
If you want to translate one of the programmes I wou
Hello people!
I would like to translate the GnomeSword UI into Romanian. Where to begin? The
site is too vague in information regarding translations, and that's a pity :-(.
Best regards,
Horatiu Alexe
Barry wrote:
> My initial comments: TEV and NRSV - both available in 66 book
> versification, Catholic versification and 66 book + Apocrypha. This
> does not warrant the note 'Catholic' against that versification as the
A couple of weeks ago I stumbled across a web page that lists the
textual
I'm just replying to this because I've been researching a similar idea for a
while and have some ideas from my own hard knocks.
I will insert a few responses to what has been written here. I invite you
to check out what I say for yourself.
--- Forwarded Message
*From*: peter <[EMAIL
I would like to translate sword into slovak language and also I would
like to make a slovak bible modules, how can I do that? is there any
software to convert txt files into sword module files or how can I do that?
martin
___
sword-devel mailing list:
I have written to Software Freedom Law Centre (the Eben Moglen lot), who
as pro-bono dealt with busybox's various rip-offs.
I asked them a) for advise and b) whether we would fulfil the criteria
for pro-bono representation.
I did this off my own back, based on the (minimal) contributions I had
to
On Thu, Mar 27, 2008 at 10:36 AM, Luke Plant wrote:
> I'm not done, and I've realised I could use some help in filling it out with
> actual Bible verses. The main help I'm looking for is verses to be added to
> the YAML
I'd suggest creating small "sets" of verses that users can install.
Pe
Chris
On Thu, Mar 27, 2008 at 8:27 AM, Chris Little <[EMAIL PROTECTED]> wrote:
> I'm a horrible RSS addict myself and I got frustrated working with
> BibleCS this evening, so I wrote an RSS feed generator for our news
> page. (Now we just need some new announcements.)
I've recently developed th
2008/3/27, Chris Little <[EMAIL PROTECTED]>:
> The address is http://www.crosswire.org/sword/sword.rss.jsp.
Thank you!
--
skype:leandro.gfc.dutra?chat Yahoo!: ymsgr:sendIM?lgcdutra
+55 (11) 3040 7300 r155 gTalk: xmpp:[EMAIL PROTECTED]
+55 (11) 9406 7191
I'm using Internet Explorer for my feed reader. And I get 'Feed Code
Error', with this message:
Reference to undefined entity 'copy'.
Line: 139 Character: 324
; We
are pleased to announce that Crossway Bibles, a
divi
Unfortunately, all I get when I go there is a blank page.
Peace,
David
**Create a Home Theater Like the Pros. Watch the video on AOL
Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom000301)
__
I have nothing special to say about the subject but the more I think
about this the more I feel that someone should write to the Free
Software Foundation and ask what they think. For example Gimp which is
one of the CDEarth programs is part the GNU project and FSF might be
very interested about thi
Hi.
Sorry I'm not yet very familiar with the Sword library. But I'm sure
this will improve. :)
Is there an easy way of getting the english book name for when I only
have the localized book name.
I.e. I have the german book name of a bible module and want to have
the english name?
Regards,
Chris Little wrote:
>> Or, you could ask them to correct the errors, and continue letting them
>> do the legwork of marketing and getting Sword out to more people. I'd
>> also recommend giving them a hand and getting them most recent versions
>> to distribute, they would probably appreciate a
DM Smith wrote:
> Troy A. Griffitts wrote:
>> To anyone's knowledge, are we anywhere using scope on work in the OSIS
>> header?
>>
>> Patrick and Jim Albright want to remove it and have it autogenerated
>> from the content, if needed. They were wondering if anyone was using it
>> for anything
I'm a horrible RSS addict myself and I got frustrated working with
BibleCS this evening, so I wrote an RSS feed generator for our news
page. (Now we just need some new announcements.)
It's not completely validating, but it's close enough (works great in
Google Reader). Send me suggestions if yo
DM.
Please change the owner to me.
Then we will see in which way we will use it.
Thx,
Manfred
Am 21.03.2008 um 14:32 schrieb DM Smith:
> Manfred,
>
> You can use the one at CrossWire.
> http://www.crosswire.org/bugs/secure/BrowseProject.jspa?id=10010
> It is not otherwise being used. I can c
Troy A. Griffitts wrote:
> To anyone's knowledge, are we anywhere using scope on work in the OSIS
> header?
>
> Patrick and Jim Albright want to remove it and have it autogenerated
> from the content, if needed. They were wondering if anyone was using it
> for anything constructive that couldn'
Hi all,
In the course of getting serious about learning Bible verses and
passages, I decided I needed a method of choosing Bible verses and
putting together schemes, and that other people could benefit from
this. I couldn't find much that was freely available and met all my
needs, so I've wri
Manfred Bergmann wrote:
> Actually I really don't undersatand why these people do not come here
> and tell us what they want to do. To package our software and
> distrubute it for some money. There would be no problem and we could
> support that if done in the right way.
>
> Maybe they are
I found a nifty little EULA that comes with the CD Earth software. I
haven't seen this before, so I assume it's not linked to anywhere, just
loaded directly from their installer. This is the only license agreement
they provide, no explicit mentions of GPL unless the software itself
mentions it
Hi there .
Trevor Jenkins wrote:
> First comment is that Steve DeRose is confusing paraphrase with idiomatic
> translation
This comment applies to a number of translations. I especially note the
TEV, which is not a paraphrase, but one of the most reliable modern
translations.
Troy
Am 27.03.2008 um 07:03 schrieb Chris Little:
> Steve Dibb wrote:
>> peter wrote:
>>
So, we're actually and legitimately in
a position where we can demand removal, DMCA takedown by the ISP,
all
that good stuff.
>>
>> Or, you could ask them to correct the errors, and continue
Hi Troy.
I think my email did sound rude.
Sorry for that. Sometimes writing in english is not so easy for me.
I'm thinking that this might be a bug in LocaleMgr so I will file a
bug in Jiira.
Regards,
Manfred
Am 26.03.2008 um 19:36 schrieb Manfred Bergmann:
> Hi Troy.
>
> Thanks for getti
51 matches
Mail list logo
