> Chipsetnya apa? > coba check dengan perintah dmesg dulu > > -- > Willy Sudiarto Raharjo > Registered Linux User : 336579
Ini pak willy hasilnya: dmesg ------------------------------------------------------------------------------------------------ .... using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.1.11 Copyright(c) 2004-2006 Emulex. All rights reserved. seagate: ST0x/TMC-8xx not detected. Failed initialization of WD-7000 SCSI card! DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007 GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007) RocketRAID 3xxx SATA Controller driver v1.0 (060426) st: Version 20070203, fixed bufsize 32768, s/g segs 256 sata_sil 0000:00:12.0: version 2.1 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18 ata1: SATA max UDMA/100 cmd 0xdca74c80 ctl 0xdca74c8a bmdma 0xdca74c00 irq 18 ata2: SATA max UDMA/100 cmd 0xdca74cc0 ctl 0xdca74cca bmdma 0xdca74c08 irq 18 scsi2 : sata_sil ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi3 : sata_sil ata2: SATA link down (SStatus 0 SControl 310) scsi 2:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 2:0:0:0: Attached scsi disk sda I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 Fusion MPT FC Host driver 3.04.04 Fusion MPT SAS Host driver 3.04.04 usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 16, io mem 0xfebfc000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 16, io mem 0xfebfd000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v3.0 sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 598 MB/s ............ raid6: using algorithm sse2x1 (1935 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 4904.000 MB/sec raid5: using function: pIII_sse (4904.000 MB/sec) md: multipath personality registered for level -4 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /class/input/input1 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 392k freed sd 2:0:0:0: Attached scsi generic sg0 type 0 kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory. ....................... ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 18 (level, low) -> IRQ 19 eth0: RealTek RTL8139 at 0x8800, 00:19:db:3b:c4:4c, IRQ 19 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Adding 995988k swap on /dev/sda1. Priority:-1 extents:1 across:995988k EXT3 FS on sda2, internal journal ACPI: Battery Slot [BAT1] (battery present) ACPI: duty_cycle spans bit 4 ACPI: SSDT 1BFCE170, 027A (r1 PmRef Cpu0Ist 3000 INTL 20051117) ACPI: duty_cycle spans bit 4 ACPI: SSDT 1BFCE0A0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117) ACPI: Thermal Zone [THRM] (75 C) input: PC Speaker as /class/input/input2 input: PS/2 Synaptics TouchPad as /class/input/input3 lp: driver loaded but no devices found Capability LSM initialized kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. ieee1394: exports duplicate symbol _csr1212_destroy_keyval (owned by kernel) ohci1394: exports duplicate symbol ohci1394_unregister_iso_tasklet (owned by kernel) eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 usb 3-1: new low speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: Acrox USB & PS/2 Mouse as /class/input/input4 input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:13.1-1 usbhid: exports duplicate symbol hiddev_hid_event (owned by kernel) -- FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab Unsubscribe: kirim email ke [EMAIL PROTECTED] Arsip dan info milis selengkapnya di http://linux.or.id/milis