Hello Ian,
Here are three filters that you might want to try.
I'll take a look tonight (my time). Too busy right now.
--
Best regards,
Miguel A. Urech (El Escorial - Spain)
Using The Bat! v3.0.2.4 Rush
Current version is 3.0.1.33 | 'Using
Hello Ian,
Here are three filters that you might want to try.
As promised this morning, I've been doing some thorough testing and I
believe I found bug in the behaviour of Common sub-filters.
If you are subscribed to TBBeta, please see my:
mid:[EMAIL PROTECTED]
or the bug report I've
Hello Ian,
M I think it should work Ian. Are you sure you set up this structure?
M Parent Filter (*) (**)
M Sub F. 1: If A Set Colour Group 1 (***)
M Sub F. 2: If B Set Colour Group 2 (***)
M Sub F. 3: If C Set Colour Group 3 (***)
M Where:
M (*) With a condition that will
Hello Ian,
RA Which I think is why Miguel suggested the subfilters should NOT be set
RA to continue processing. This is then the exit command from the group of
RA subfilters.
RA Doesn't that work for you?
When I told the filter not to continue processing, then all filters
would stop, not
Hello Ian,
M The exit action is not needed. It is implicit when you do_not_ set the
M _sub-filters_ to continue processing.
Well, I created the various common filters to set the colour group,
set one to be the parent,...
snipped quite a bit
In my mid:[EMAIL PROTECTED] I said I'll test it
as
Hallo Ian,
On Tue, 2 Nov 2004 18:11:56 +1100GMT (2-11-2004, 8:11 +0100, where I
live), you wrote:
IAW In some cases, the two filters can be triggered in succession because
IAW both filters match the criteria. The filters set the same colour group
IAW so that is not the problem, but I was
Hello Roelof,
Try to create a filter with the 'continue processing' bit set. Set all
of your colour group filters as subfilters of this parent filter. See
if that does what you want.
I think it should work, but I haven't tried it myself.
--
Best regards,
Miguel A. Urech (El Escorial -
On Wed 3 November 2004, 12:34:12 +1000, Ian A. White wrote:
one problem is that the conditions for the sub-filters
can see one message trigger two or more filters. Setting them to
continue sees it continue with the remaining sub-filters. What I would
like is something like an exit command so
8 matches
Mail list logo