On Mon, Sep 22, 2014 at 06:48:49PM +0200, Raphael Graf wrote:
>
> I'm sorry, this diff was using the wrong defines.
> Here's a corrected version.
>
> Any comments or oks?
>
> +
> + if (sectors != 0) {
> + sf->flags |= SFF_SDHC;
> + sf->csd.cap
On Sun, September 21, 2014 2:09 pm, Raphael Graf wrote:
> On Sat, September 20, 2014 7:45 pm, Jonathan Gray wrote:
>> On Sat, Sep 20, 2014 at 06:01:51PM +0200, Cédric Tessier wrote:
>>> Hi,
>>>
>>> I've bought a BeagleBone Black rev. C board, and I was trying to install
>>> OpenBSD on it, but the i
On Sun, Sep 21, 2014 at 03:22:41PM +0200, Cédric Tessier wrote:
> OpenBSD runs impressively well on my BeagleBone, the only drawback I can
> see is that the system is slowed down by poor MMC performances (due to
> missing DMA support in ommmc driver I suppose ?).
Yes. The ommmc(4) driver should u
Hi,
My fix was very conservative (I don't have a good understanding of MMC,
and clearly outdated documentations).
I've tried your patch Raphael, and it's working as expected (and it's so
much cleaner).
OpenBSD runs impressively well on my BeagleBone, the only drawback I can
see is that the syste
On Sat, September 20, 2014 7:45 pm, Jonathan Gray wrote:
> On Sat, Sep 20, 2014 at 06:01:51PM +0200, Cédric Tessier wrote:
>> Hi,
>>
>> I've bought a BeagleBone Black rev. C board, and I was trying to install
>> OpenBSD on it, but the internal eMMC was causing errors.
>>
>> sdmmc1: unknown CARD_TY
On Sat, Sep 20, 2014 at 06:01:51PM +0200, Cédric Tessier wrote:
> Hi,
>
> I've bought a BeagleBone Black rev. C board, and I was trying to install
> OpenBSD on it, but the internal eMMC was causing errors.
>
> sdmmc1: unknown CARD_TYPE 0x17
> scsibus1 at sdmmc1: 2 targets, initiator 0
> sd1 at
Hi,
I've bought a BeagleBone Black rev. C board, and I was trying to install
OpenBSD on it, but the internal eMMC was causing errors.
sdmmc1: unknown CARD_TYPE 0x17
scsibus1 at sdmmc1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: SCSI2 0/direct fixed
sd1: 1024MB, 512 bytes/sector, 20