> First I added a custom reset function, but it turned out the problem was
> elsewhere. So the current driver is just pretty printf'ing the model and
> the phy.
>
> And you're right, it's not worth getting this in tree so forget about
> this diff.
correct. ukphy is named a bit strangely.
On 23.10.2015 02:44, Jonathan Gray wrote:
What does this do that ukphy doesn't?
I don't see any errata or special handling here.
First I added a custom reset function, but it turned out the problem was
elsewhere. So the current driver is just pretty printf'ing the model and
the phy.
And yo
What does this do that ukphy doesn't?
I don't see any errata or special handling here.
On Fri, Oct 23, 2015 at 04:33:22AM +0300, Paul Irofti wrote:
> The following diff adds a basic PHY for Axis dongles.
>
> Changes:
> ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
> 0x
The following diff adds a basic PHY for Axis dongles.
Changes:
ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000ec6, model 0x0001
ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000ec6, model 0x0008
To:
axphy0 at axe0 phy 16: AX88772 10/100