gt;> Curtis McKay
>> Network Administrator
>> Belleville Township High School District 201
>> cmc...@bths201.org
>>
>> -Original Message-
>> From: tech-geeks-boun...@tech-geeks.org
>> [mailto:tech-geeks-boun...@tech-geeks.org] On Behalf Of Aaron Ha
...@tech-geeks.org
[mailto:tech-geeks-boun...@tech-geeks.org] On Behalf Of McKay, Curtis
Sent: Thursday, July 22, 2010 10:43 AM
To: 'Tech-Geeks Mailing List'
Subject: Re: [tech-geeks] layer 2 config
Layer 1...gets you every time.
Curtis McKay
Network Administrator
Belleville Township H
, 2010 11:02 AM
To: Tech-Geeks Mailing List
Subject: Re: [tech-geeks] layer 2 config
Layer 8 issue? ;)
On Wed, Jul 21, 2010 at 11:01 AM, Daniel Zobel wrote:
> Nevermind, I found the issue. It always helps to plug in the correct cable
> into the correct port. J
>
>
>
> Dan
&g
esday, July 21, 2010 10:36 AM
> To: tech-geeks@tech-geeks.org
> Subject: [tech-geeks] layer 2 config
>
>
>
> I am trying to make sure that my thought process is correct. I am going
> from my layer 3 switch to the layer 2 to another layer 2. I am trying to
> set up a separate vla
Dan, on Switch3, make sure it is a VTP client, and your VTP Domain and
VTP password match
show vtp status
show vtp password
Any VLAN created on Switch 1 should propagate down to switch 3 if
trunks and VTP are set correctly.
On Wed, Jul 21, 2010 at 10:35 AM, Daniel Zobel wrote:
> I am trying to
-boun...@tech-geeks.org
[mailto:tech-geeks-boun...@tech-geeks.org] On Behalf Of Daniel Zobel
Sent: Wednesday, July 21, 2010 10:36 AM
To: tech-geeks@tech-geeks.org
Subject: [tech-geeks] layer 2 config
I am trying to make sure that my thought process is correct. I am going
from my layer 3 switch to
Are you doing a dot1q trunk between the layer 2 switches? If you can,
send the configuration of the uplink ports between the layer2
switches(show interface trunk AND show cdp ne) and the vtp
configuration of the two switches (show vtp status)
On Wed, Jul 21, 2010 at 10:35 AM, Daniel Zobel wrot
I am trying to make sure that my thought process is correct. I am going
from my layer 3 switch to the layer 2 to another layer 2. I am trying to
set up a separate vlan on one of the ports coming from the second layer 2 to
the last one where the device is. I know that the second layer works with
