A fine and accurate observation. I've been slowly replacing the loud 110v fans
in my test equipment with new, higher cfm, quiet 12 vdc fans that probably
won't last as long but make it possible to hear in my workshop.
On Oct 21, 2010, at 11:59 PM, Perry Sandeen wrote:
> Gents,
>
> Over the
Can I assume then you are not interested ??
73, Dick, W1KSZ
-Original Message-
>From: Perry Sandeen
>Sent: Oct 21, 2010 9:44 PM
>To: "time-nuts-requ...@febo.com"
>Subject: [time-nuts] SWAP RFTG-II-XO for Trimble T-Bolt
>
>Gents,
>
>Wrote > I have a working Lucent RFTG-II-XO that I don'
Gents,
Wrote > I have a working Lucent RFTG-II-XO that I don't need. Does anyone have
an extra Trimble Thunderbolt they would swap for it? I would consider other
GPSDO's.
Now Dick we know are a fine and honorable fellow BUT there is about a $40
spread in your favor for what you want to swap f
Gents,
Over the years I’ve purchased 15 or so pieces of HP 3XXX and HP 5XXX series of
test equipment.
All has worked well until a week ago my HP 3568B which had worked for years
smoked when I turned it on. I had moved and had not powered it for a couple of
years. Looking at the PS board I
Awww... Aggravation? Don't you mean "challenge?"
And taming a CS reference is a stepping-stone to your own H maser, right?
(I'm still at the tbolt - Rubidium stage of time-nuttiness, and having a lot of
fun, thanks to a bunch of folks on this list.)
bob K6RTM in sunny silicon valley
---
Gents,
Talk about ask and ye shall receive!
I want to thank all who have contributed answers on and off line.
It appears at this time that in the case of a low end CS for me, that the
remuneration is not worth the aggravation. I have far many too many projects
to complete to be a nanny to wha
The first E seems to indicate "Normal tracking has been halted due to loss
(or temporary interuption) of the external reference"
The last E = "not yet in tracking mode"
Doug
K8ZN
> -Original Message-
> From: time-nuts-boun...@febo.com [mailto:time-nuts-
> boun...@febo.com] On Behalf Of
Hello Tony,
Do you have the manual ?
My june, 1983 2100F op and maintenance manual, page 3-13 indicates:
E #1 is a - or acquisition not in progress, cleared by software
E#2 is a E, normal tracking has been halted due to a loss of external
reference
The operator clears this bit manually
In a message dated 22/10/2010 01:05:19 GMT Daylight Time,
paulsw...@gmail.com writes:
Antonio is in Italy and they do have loran still.
I have seen the e's on mine and I believe you get that if you do not feed
an
external reference into it.
Regards
---
I thought Ct1 was Port
In fact it seems that he is in Portugal.
Regards
Ignacio, EB4APL
El 22/10/2010 2:04, paul swed escribió:
Antonio is in Italy and they do have loran still.
I have seen the e's on mine and I believe you get that if you do not feed an
external reference into it.
Regards
On Thu, Oct 21, 2010 at 6:
Antonio is in Italy and they do have loran still.
I have seen the e's on mine and I believe you get that if you do not feed an
external reference into it.
Regards
On Thu, Oct 21, 2010 at 6:55 PM, Chuck Harris wrote:
> Are you sure that your Loran chain is still up? In the US and
> Canada, Loran
Hi guys,
Hope you don't mind me adding this to the mailing list, but I've got various
HP items (and a few others) on eBay right now:
http://search.ebay.co.uk/_W0QQsassZelektricity74QQhtZ-1
If anyone needs any more info please don't hesitate to drop me a line.
Kind regards,
Steve
__
Are you sure that your Loran chain is still up? In the US and
Canada, Loran has been decommissioned.
-Chuck Harris
asma...@fc.up.pt wrote:
Hello!
After power up, my 2100F Loran-C receiver displays
(E 1002048) followed by (E-20), as usually, but recently
I have a trouble: after that the TRACKI
Hello!
After power up, my 2100F Loran-C receiver displays
(E 1002048) followed by (E-20), as usually, but recently
I have a trouble: after that the TRACKING led goes RED
still and the display shows (- E - - - E).
Running the test subroutines 1 to 4 everything seems
to be OK but the fault persists
I have a working Lucent RFTG-II-XO that I don't need. Does
anyone have an extra Trimble Thunderbolt they would swap for
it ?
I would consider other GPSDO's.
73, Dick, W1KSZ
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https:
Hi
Anybody else have any $500 working cesium's they would like to part with?
Bob
On Oct 20, 2010, at 10:44 PM, Bill Hawkins wrote:
> The items have been sold to a local buyer.
>
> I'm an old man looking to lighten the load that anchors me here,
> not a dealer willing to ship anywhere.
>
> Th
16 matches
Mail list logo
