On Sun, Sep 25, 2011 at 1:36 AM, Magnus Danielson <
mag...@rubidium.dyndns.org> wrote:
>
> I was about to ask for the specific papers of time calibrations, even if
> the overview presentation indicates that the verification steps I expect to
> be there have been done. Also the path calibrations ne
Everyone I want to thank you for your help.
I was sent the snippet I needed and the 207 lives. Copying wwvb right now.
Needs a bit more tlc like getting the phase accumulator working correctly.
Annoying as they actually are. But the rcvr looks pretty hot. The chart
recorders running now and making
On 9/24/2011 9:39 AM, paul swed wrote:
Hello to the group I wonder if anyone might have the fluke 207 vlf
manual. I am actually looking for the phase shifter board.
I think it actually uses a regenerative divider from what I can tell
and suspect the issues I see are at that point. Slightly off
I finally built a timelapse movie of the 60 Hz clock + webcam
experiment. It covers about a week, but there may be a gap or
three. It's a 20 MB file (tested with VLC and mplayer).
http://n5tnl.com/tec/timelapse_clock.mov
I need to improve the lighting to eliminate the horrible shadow
around
On 9/24/2011 9:39 AM, paul swed wrote:
Hello to the group I wonder if anyone might have the fluke 207 vlf manual. I
am actually looking for the phase shifter board.
I think it actually uses a regenerative divider from what I can tell and
suspect the issues I see are at that point. Slightly off fr
On 24/09/11 18:15, Javier Serrano wrote:
On Fri, Sep 23, 2011 at 10:38 PM, Bill Dailey wrote:
The article is actually pretty fascinating regarding how it was all done.
Light can't go through rock (very far), neither can most other particles
(some farther than others). Neutrinos can pass thro
On 24/09/11 15:12, Jim Lux wrote:
On 9/24/11 1:58 AM, Magnus Danielson wrote:
It would be interesting to see what a combination of mutual
synchronisation within a constellation and central synchronisation would
yield. Your constellation would maintain contact with each other and
pull eachother
On Fri, Sep 23, 2011 at 10:38 PM, Bill Dailey wrote:
> The article is actually pretty fascinating regarding how it was all done.
> Light can't go through rock (very far), neither can most other particles
> (some farther than others). Neutrinos can pass through earth and the sun
> unimpeded. It
WarrenS wrote:
> Does your Mode B 10811 use a different xtral or same xtral, different
> frequency?
> What does Mode B do better, ... and worse?
> Why was it not used in the 10811?
Mode B is the same crystal on a different frequency
(about 10.95 MHz). It does not have a turnover and
the tempco is
Does your Mode B 10811 use a different xtral or same xtral, different
frequency?
What does Mode B do better, ... and worse?
Why was it not used in the 10811?
When trouble shooting a freq stability problem, usually the more data the
better.
What can really help to narrow down the cause or see
Hello to the group I wonder if anyone might have the fluke 207 vlf manual. I
am actually looking for the phase shifter board.
I think it actually uses a regenerative divider from what I can tell and
suspect the issues I see are at that point. Slightly off frequency 100hz.
Which is actually pretty l
On 9/24/11 1:58 AM, Magnus Danielson wrote:
It would be interesting to see what a combination of mutual
synchronisation within a constellation and central synchronisation would
yield. Your constellation would maintain contact with each other and
pull eachother to some form of average time (acco
Fellow time-nuts,
I now have three 5065A in my lab (not all mine) and I can now conclude
that the A15 PSU board C8, C9 and C10 caps has gone bad on all three.
The only difference on the first one is that the process has not gone as
far as to blown the caps, but two of the leads has began the p
On 24/09/11 00:21, Jim Lux wrote:
On 9/23/11 2:24 PM, Chris Albertson wrote:
On Fri, Sep 23, 2011 at 12:32 PM, Jim Lux wrote:
On 9/23/11 10:50 AM, Chris Albertson wrote:
Yes, in the general case, but in the spacecraft case, I think we're more
concerned about smoothness and such over time spa
On 24/09/11 00:13, Jim Lux wrote:
On 9/23/11 2:00 PM, Chris Howard wrote:
Seems like a lot of unknowns. You would have to
have sensors monitoring the sensors.
I think the "clock model" (insofar as variations in the oscillator) are
outside the scope, as long as the effect of that variation can
15 matches
Mail list logo