-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Seeems to be differential GPS?
http://en.wikipedia.org/wiki/Networked_Transport_of_RTCM_via_Internet_Protocol
Cheers,
James Harrison
On 04/04/2013 07:32, gary wrote:
> Can anyone translate this to English. OK, it is English, but you
> know what I me
Can anyone translate this to English. OK, it is English, but you know
what I mean. It is supposed to be some new time service.
http://rts.igs.org/access/
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-
My last one was eBay as well.
Thomas Knox
> Date: Wed, 3 Apr 2013 23:15:06 -0400
> From: bobda...@triad.rr.com
> To: time-nuts@febo.com
> Subject: Re: [time-nuts] Question about FTS 1050A
>
> Dick,
>
> If you're asking about the FTS 1050A it was on Ebay. I believe
> Symmetricom still sells
http://www.leapsecond.com/tbolt-faq.htm
73,
Bob, K1REM
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Richard Solomon
Sent: Wednesday, April 03, 2013 10:56 PM
To: time-nuts@febo.com
Subject: [time-nuts] Trimble T-Bolt Pin-Out
Anybod
Dick,
If you're asking about the FTS 1050A it was on Ebay. I believe
Symmetricom still sells them but I can't justify buying one from them.
bob
On 4/3/2013 10:56 PM, Richard Solomon wrote:
Just curious, where are you getting these from ?
Tnx, Dick, W1KSZ
On 4/3/2013 7:21 PM, Robert Darby
Just curious, where are you getting these from ?
Tnx, Dick, W1KSZ
On 4/3/2013 7:21 PM, Robert Darby wrote:
A little follow-up.
I looked at all four 1000B outputs with the scope; one pair is at 1.2V
rms and the second is at .7V rms. The waveform looks clean and is
close to the 1.0V and .5V
Anybody have the pin-out of the DB-9 connector ? Need to know what is
connected
to each pin.
Tnx, Dick, W1KSZ
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the
A little follow-up.
I looked at all four 1000B outputs with the scope; one pair is at 1.2V
rms and the second is at .7V rms. The waveform looks clean and is close
to the 1.0V and .5V described on the spec sheet so I conclude that the
oscillator is fine.
I disassembled the doubler case to ch
Hi
First step would be to lift the +22 feed wire and see if a current meter shows
any current drain into the doubler box. The 7818 would suggest that you have no
current, but it may just be well heat sunk. If there's no current into the box,
it's time to open it up.
Bob
On Apr 3, 2013, at 2:5
Bob I have no schematics but some pics might be helpful in trying to
understand why the 7818 has not incoming voltage. I speculate the unit plus
into 110 VAC?
The TNCs almost make sound like some cel tower thing.
Regards]
Paul
WB8TSL
On Wed, Apr 3, 2013 at 3:07 PM, Tom Knox wrote:
> Hi Bob;
> I
Hi Bob;
I was wondering who won the unit. They are very nice oscillators. With noise on
older equipment like the 1050A I would check and/or replace caps.
I am about to do that to my own 1050A. It may not resolve the problem, but it
will eliminate that possibility. I look forward to hearing how t
I purchased an FTS 1050 recently and after a cursory inspection of the
interior powered it up to see if it's functional.
This particular unit is a bit odd; it has the optional battery back-up,
no PPS, and instead of the usual 1Mhz, 5Mhz, 10Mhz it has four 10Mhz
outputs with tnc female connecto
12 matches
Mail list logo
