Arthur wrote:
I’d say it would be an MMIC amp similar to this device [Avago MGA-87563]
If a chip similar to the Avago part Arthur referenced is what is
installed, which seems plausible, the 0.749v on the RF input (Pin 3) is
a fault and is caused by an external source of voltage (3.417v) imp
On Sat, 5 Aug 2017 10:47:40 -0400
paul swed wrote:
> The .5 on the f connector is an issue and thats through the filter on top
> of the board made of traces and 3 caps. From Arthur's digging I would agree
> he found the chip or one that would work. But that chips voltages seem to
> match so most
The .5 on the f connector is an issue and thats through the filter on top
of the board made of traces and 3 caps. From Arthur's digging I would agree
he found the chip or one that would work. But that chips voltages seem to
match so most likely not the issue. What does the F connector measure to
gr
Interesting video
https://www.youtube.com/watch?v=6m0xGwkYYy0
-=Bryan=-
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
On Sat, 5 Aug 2017 13:01:56 +0200
Martin Burnicki wrote:
> Chris Albertson wrote:
> > I'm not a fan of Meinberg because of the way they market freely
> > available software.
>
> I'm sorry you feel this way.
>
> We at Meinberg have supported the NTP project for many years, by
> donations of mone
In message <20170805130056.58880...@aluminium.mobile.teply.info>, Florian Teply
writes:
>The obvious trick would be to choose their distance such that
>only their noise cancels...
But the good news is that if you mix their output, you would have
the worlds most precise DC signal :-)
-
Pin 1= 0v
Pin 2= 0v
Pin 3= 0.749V
Pin 4= 4.892v
Pin 5= 0v
Pin 6= 3.417v
I’d say it would be an MMIC amp similar to this device. It
has the same pin-out so it is a possibility. The Amp In
my newer version is an 23 db gain device but 8-pin so I
Suspect your version may have similar specs. Here is
The obvious trick would be to choose their distance such that
only their noise cancels...
SCNR,
Florian
Am Sat, 5 Aug 2017 01:09:00 +0100
schrieb Adrian Godwin :
> Don't put it anywhere near your hydrogen maser or they'll cancel each
> other out.
>
>
> On Sat, Aug 5, 2017 at 12:55 AM, Christop
Chris,
Chris Albertson wrote:
> I'm not a fan of Meinberg because of the way they market freely
> available software.
I'm sorry you feel this way.
We at Meinberg have supported the NTP project for many years, by
donations of money and hardware, testing, submitting bug reports and
patches. There'