Re: [time-nuts] ***SPAM*** PRS10 PRBB Shematics

> Le 7 oct. 2017 à 19:58, Mark Sims a écrit : > > SRS sells the connector. You might want to make sure you have a tube of > ass-lube handy when you check the price... It's around three times the > distribution price. SRS really should have used a standard D-sub and a

[time-nuts] Question about SA.33 Rb clock

Dear group:   I have got a SA.33 Rb module from a second hand GPS clock, at first it works well, but soon after it was damaged that beacuse I was trying to install a heat sink on it, unfortunately I used screws which its size too long, so maybe the screws drilled into inside Rb lamp or inside

Re: [time-nuts] sine to square wave circuits - performance data?

Hoi Attila I've unearthed the TAPR T2-mini. I need to obtain an 8 pin DIP header so that I can connect pins 2 +3 on the PCB DIP socket. Then I can test PN etc as function of input signal level at 10MHz. May take a week or so to arrive. Meanwhile I have an optical interferometer to work on.

Re: [time-nuts] PRS10 PRBB Shematics

The PRS10 was intended as FRS alternative you can use the same plug with no changes on both unitsBert Kehren Sent from my Galaxy Tab® A Original message From: Mark Sims Date: 10/7/17 1:58 PM (GMT-05:00) To: time-nuts@febo.com Subject: [time-nuts] PRS10

Re: [time-nuts] Novatel Dual frequency GNSS receivers on ebay

Any idea what they are selling for at this time? I see that some sold for the BIN price of $349.99 up until June 20. After that, 'Offer Accepted' occurred up through October 5, with a BIN price now of $649.99, all plus $40 shipping. Joe -Original Message- From: time-nuts

Re: [time-nuts] GenRad 1115B

Hi One of many manuals out there: https://elektrotanya.com/general_radio_type_1115-b_0,1_1_5mhz_standard_frequency_oscillator_1967_sm.pdf/download.html First thing to check:

[time-nuts] PRS10 PRBB Shematics

SRS sells the connector. You might want to make sure you have a tube of ass-lube handy when you check the price... It's around three times the distribution price. SRS really should have used a standard D-sub and a couple of SMA connectors. I considered laying out a PRBB clone, but didn't

[time-nuts] GenRad 1115B

I've been given a General Radio 1115B. I have not looked around much yet for a manual, but does anyone have info on the unit? Tnx! -- 73, Mike, N1JEZ "A closed mouth gathers no feet" ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go

[time-nuts] Novatel Dual frequency GNSS receivers on ebay

There is an ebay listing for "Novatel GPS-702-GG with SPAN-CPT Single Enclosure GNSS/INS Receiver + Cable" with a fairly large number available. This is a Novatel OEM628 dual frequency receiver (supports GPS, Glonass, SBAS, apparently including L1C and L2C), plus a three fiber ring gyros (with

Re: [time-nuts] PRS10 PRBB Shematics

I couldn’t find the entire connector anywhere. The unpopulated D-Sub Digikey id is DAM-11W1SM-A197 (sorry, I had dropped the 1) I couldn’t find a european distributer. Mouser has no stock. > Le 7 oct. 2017 à 16:06, Jerry a écrit : > > Mike > > I searched Digikey for the

Re: [time-nuts] PRS10 PRBB Shematics

Hi Any time I’ve bought those connectors, it has been as shells, bodies, and inserts. You buy the bits and peces to put together. The reason is fairly simple. There are multiple “big fat” inserts that can go into them. Shells come a lot of ways. Coax, and various high current contacts are the

Re: [time-nuts] PRS10 PRBB Shematics

Mike I searched Digikey for the canon connector but could not find it... they do have the coax insert part number you listed. Are you aware of any other source for the entire connector? Jerry, NY2KW -Original Message- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of

Re: [time-nuts] PRS10 PRBB Shematics

Hi Jacques, I’ve bought three of these PRBB for my PRS10s and got none of the information that you are interested in supplied by SRS. As you are asking for the Cannon connector used, I presume you don’t have one and maybe want to make one up? I have removed one and confirm that the Cannon

Re: [time-nuts] 5071A Reference Oscillator ?

It was a 10811 that I modified to get more tuning range by replacing the stock varactor with a hyperabrupt type, probably my favorite MV209, but I can't remember for sure. Just yesterday, I designed a phase modulator using an MV209. Joined the club of obsolescence. Digikey: No Stock, no

Re: [time-nuts] 5071A Reference Oscillator ?

> One of the few things I dont have a manual for > > Can anyone tell me if there is an HP model number for the Reference > Oscillator Assembly (A19) in the 5071A? Might be a a 10544A ? > The OCXO was 05071-60219. As Rick says, it was a modified 10811. The 10544 was long gone by the