Bob wrote:
Is it labeled 3.3 to 18V on the antenna?
No, the writing on the antenna is all Chinese. The specs published on eBay
state that it is.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
3M has a product called Cold Shrink tubing. It is designed to seal high
voltage, etc cables in buried installations. It is a silicone (?) rubber
stretched over a collapsable polyethylene core. You run the cable through the
core and pull on a tab which unwinds the core and the stretched
I would surmise that the antenna has (or rather had) a protection network
to protect against voltage spikes or surges. Your description of events
seems consistent with an triggered SCR crowbar circuit, and the 2nd
attempt at the higher current limit shorted the SCR. Note that this may
not have
It's called 'adhesive lined heatshrink'. Yes, it's available, though a reel
of the Good Stuff (Raychem) costs a small fortune.
They also make custom boots to fit various standard connectors.
Probably best bought as surplus or from a trusted seller who bought reels
from military, autosport or
Hi
There are tapes designed for waterproofing things like coax connectors.
Bob
> On Feb 9, 2018, at 7:41 PM, Hal Murray wrote:
>
>
> li...@philpem.me.uk said:
>> Generally speaking, you can seal most RF connectors quite nicely with a few
>> layers of
li...@philpem.me.uk said:
> Generally speaking, you can seal most RF connectors quite nicely with a few
> layers of self-amalgamating tape and a layer of PVC tape over the top of
> that (to protect from UV).
Many years ago, I picked up a chunk of scrap the local cable TV installer had
left on
On 06/02/18 22:21, Angus via time-nuts wrote:
> On Tue, 6 Feb 2018 14:54:23 -0500, you wrote:
>
>> 3) itÂ’s designed for continuous outdoor use (connector is well shielded etc)
>
> That's something that has always baffled me - the number of antennas
> which the manufacturers claim are suitable
On 07/02/18 01:16, Bob kb8tq wrote:
>> MSF disciplined oscillator?! I don't trust these receivers to any better
>> than about the 20ms mark, so such a disciplined oscillator would have quite
>> a long integration time!
>
> Once upon a time, that *was* how people did disciplined oscillators. Part
On 9 February 2018 at 21:43, John Green wrote:
> To those who doubted that the antenna was actually a 3.3 to 18 volt design,
> it seems you were correct. Today, I hooked it up to a variable power supply
> and slowly raised the DC voltage fed to the antenna. It began to pull
>
Hi
Is it labeled 3.3 to 18V on the antenna?
Bob
> On Feb 9, 2018, at 4:43 PM, John Green wrote:
>
> To those who doubted that the antenna was actually a 3.3 to 18 volt design,
> it seems you were correct. Today, I hooked it up to a variable power supply
> and slowly raised
To those who doubted that the antenna was actually a 3.3 to 18 volt design,
it seems you were correct. Today, I hooked it up to a variable power supply
and slowly raised the DC voltage fed to the antenna. It began to pull
current at about 2.9 volts and at 3.3 volts, took about 40 mA. I continued
Skip -
The Trimble Acutime 2000 outdoor antenna
http://www.n4iqt.com/trimble/Acutime2000.pdf
looks identical to the Trimble Palisade GPS antenna.
http://dc2light.co.uk/PALISADE-Manual.zip
Mark, GM4ISM had surplus Palisade antennas, at one time.
He noted differential RS-422 configuration and TSIP
Yeah -- delays happen. The DSAC is part of the US Air Force STP-2 program.
STP-2 launch was awarded to SpaceX in December, 2012. But the Falcon Heavy only
completed it's first launch earlier this week, and instead of sending a
customer payload they send a Tesla to past the orbit of Mars.
On 2/8/18 8:55 PM, Bill Byrom wrote:
After the successful Falcon Heavy launch earlier this week, it appears that the
Deep Space Atomic Clock (DSAC) is now scheduled to go up in June 2018 on a
Falcon Heavy carrying the US Air Force STP-2 test payloads.
14 matches
Mail list logo