A time-nuts conference in Saarbrooklyn - well, I want to register! But I
am living in the Rhein Main Area now, I can join if I visit my old home
(Neinkerje)
BR
Hendrik
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://ww
Its before breakfast for me now, but you could set up a transmitter on a
ISM frequency at 5 GHz or 60 GHz, where you have plenty of bandwidth
(where plenty means 160 MHz or 2 GHz) and transmit your own clock signal.
Either you roll your own by modifying some ham radio open source
designs, or try
Hi,
about getting time from the Internet to a clockwork:
Have a look at the ESP8266, which you can get from china for as low as
4€ in the embodiment of a AMICA board:
Its a controller with some GPIOs and WLAN enabled, freely programmable
(Either with the ARDUINO IDE, or with a LUA or BASIC Fi
Looks like a rebadged Schlumberger Unit to me.
(Case style wise)
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Hello list,
same guy who direct-wired a STP2390C into a HP5334A earlier this year
back here again. As a christmas holidays nano-project I made a little
PCB to have a nice plug-in module instead of a snake nest. Today the
boards arrived from the factory, and it was a lesson in "dont try to
des
Hi List,
here is my example spectrum taken with a Rigol 815, due to inpatience
only up to 100 MHz.
(I don't know if this was posted yet, but still then it would be a 2nd,
3rd example.)
This shows what is meant by "clean 15, dirty 10 MHz." I always use
insane pre-attenuation as every beginner
Hello List,
having not looked at the spectra yet as I am confined to mobile phone
instead of PC often, I had the idea to marry those two well-known
devices to get a nice clean reference oscillator. I remember the
spectrum of the FEI as not so nice, and the MTI sounds better.
My understandin
Have a look at Bluetooth low energy. I am working with some nice Modules
from Bluegiga (BLE112), they just announced a long-range version.
Although they are already very conservative with power and will run for
a while even with a button cell, a mercury switch (sorry) could trigger
them upon mo
Dear group,
as I just yesterdays implanted a non-original OCXO (C-MAC STP2390C) into
a recently ebayed counter, I wanted to share my experience:
Swapping C8 to C100 position as per 5334B Service Manual (the B) is
fine. J8, the connector for Option 010, is not in the 10811 layout as in
the B.
Good morning Paul,
First: I almost spilled my coffe as you bear a similar last name as a
guy at a national research lab who does exactly such things :)
Even when it makes your ECG preamplifier free for other things, I advise
you to use another sensor and put a lot of decoding and interpretation
t
10 matches
Mail list logo