Re: [time-nuts] HP 5335A Question

I think single shot is only 9 digits. Press "mean" on the left side to get a 100 sample average that gives you more digits. On Oct 31, 2017 1:01 PM, "Richard Mogford" wrote: > I have an HP 5335A and I am measuring the output of a Suzler 2.5. I have > a GPSDO 10 MHz input

Re: [time-nuts] Distribution divider/amplifier for 10MHz GPSDO

On Mon, Oct 23, 2017 at 1:49 PM, Bob Bownes wrote: > Will it work? Probably. Up to a point. > > Is is best practice? Not even close. > > Each device will (should?) generally present a 50Ω termination. In the case > of instruments that provide their own ref output which is then

Re: [time-nuts] Distribution divider/amplifier for 10MHz GPSDO

tem and while it wasn't up to a really > good distribution amplifier, it was perfectly adequate for normal RF > testing. > > John > > * Mismatch causes reflections, which can screw up square wave edges or > sine wave zero-crossings, increasing jitter. SWR is usually a bigger issue > fo

Re: [time-nuts] Distribution divider/amplifier for 10MHz GPSDO

I was about to ask a related question of the list: when do you need a distribution amplifier, and when is it sufficient to just have a single (linear) run of coax? I have a GPSDO (Nick Sayer's device) that I want to use to feed a few other pieces of equipment in my lab (an HP5335A, John