Hi Mark,
thanks for your reply.
Try enabling the PPS input form the "P menu.
I can´t find this option - I can toggle the PPS output, but
not the input.
BTW, what´s the "set TIC" option? I can enter a number here,
but I can´t find something about this command in the manual...
&a Auto-Tune s
Hello Time-Nuts,
thanks to Mark´s breakout board I was able to fire up my X72
rubidium. It seems to work fine.
FW is 5.19.
As far as I understand from the (rather crappy) manual, I
should be able to discipline it to 1pps, but I wasn´t lucky
using the commands from the manual.
I switched t
Dear Time-Nuts,
Happy New Year!
Maybe this is of interest for some of you:
A copy of Stable32 was on my wish-list for Christmas and I asked for the
possibility of a non-profit-license. Bill Riley informed me that he
donated Stable32 to IEEE UFFC and it will be available for free download
wit
recommend this to every owner of a used LPFRS - it takes
about 10 minutes.
Thanks again for all the hints and have a nice weekend,
Matthias
Am 25.05.2017 um 12:46 schrieb Bob kb8tq:
Hi
On May 25, 2017, at 4:12 AM, Matthias Jelen wrote:
Hi Angus,
thanks for the hint. I read through this fairly
oscillator
amplitude stability (also a lamp!)
Tim N3QE
On May 23, 2017, at 3:40 AM, Matthias Jelen wrote:
Hello Time-Nuts,
i´ve been playing with some Rbs recently.
I compared two LPFRS-01 to a PRS-10. One seems to behave quite well (compared
to the specs given here:
http://www.spectratime.com
Hi Angus,
thanks for the hint. I read through this fairly long thread - the
baseline seems to be: Replace the caps.
Best regards,
Matthias
Am 23.05.2017 um 21:44 schrieb Angus:
Hi,
If you've not already looked, it would be worth checking on the
EEVblog since there were some discussions the
Hello Time-Nuts,
i´ve been playing with some Rbs recently.
I compared two LPFRS-01 to a PRS-10. One seems to behave quite well (compared
to the specs given here:
http://www.spectratime.com/uploads/documents/isource/iSource_LPFRS%20Spec.pdf)
- short term stability specs are met), the other one
Le 8 déc. 2016 à 10:40, Matthias Jelen a écrit :
>
> Hello!
>
> 3rd try, I was using a webmailer which changed it defaults to html. Thanks
> for the hint Mike!
>
> I got an OCXO from a piece of scrapped Agilent equipment.
>
> The OCXO has a label on it saying:
>
>
Hello!
3rd try, I was using a webmailer which changed it defaults to html. Thanks for
the hint Mike!
I got an OCXO from a piece of scrapped Agilent equipment.
The OCXO has a label on it saying:
CTS KNIGHTS
970-2123-2
10.000 MHz
08924-61037
The OCXO has four wires and an RF-Connector, so
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Hello John,
thanks, that did the trick - it´s working flawless now!
Regards,
Matthias, DK4YJ
Am 28.06.2016 um 00:32 schrieb John Miles:
But TimeLab doesn´t list any GPIB interfaces.
Did anyone have success with this combination? Any insights
highly appreciated...
Agilent's NI488.2 compatibi
Hello Time-Nuts,
I got an Agilent 82357b USB <-> IEC-Bus adaptor at a ham
fest. Now I´m trying to get it to work with TimeLab.
I Installed some hundred MB of Keysight software and
followed the recipes I found in the web to get the 82357b
working with 488.2 applications - basically checking "
Hello Time-Nuts,
once again a question to the 5370 experts:
After some time of operation (hours...) my 5370A starts to become noisy.
This can be seen best when teeing the 10 MHz REF OUT to IN A nnd IN B,
choosing TI and setting STD DEV, 1k samples. When everything works well,
the displayed va
Hello Time-Nuts,
thanks for that hint. Anyone in Europe / Germany interested?
I´d be interested in buying some of those - I´d be willing
to organize a centralised buying, pick them up at the
customs and forward them (if the number stays reasonable
:-) Please send me a private message if int
Tom,
thanks for sharing this! This was exactly what I was looking for.
Regards,
Matthias
Am 23.08.2015 um 19:19 schrieb Tom Van Baak:
To learn more, I think the best way would be to put the
counter into its fast binary mode and acquire 1k time
interval samples per second. That would give me l
Hi Gerhard,
many thanks for sharing this.
I replaced the OCXO in my REF-1, and now it´s working again.
Nice to see that I still can use the old OCXO with negative
tuning voltage.
Regards,
Matthias, DK4YJ
Am 12.08.2015 um 19:13 schrieb Dave M:
I have verified with MTI that the recommended t
ould give me loads of
data to play with and it would be easy to try out how
different averaging schemes affect the result.
I´ll have to read and think some more :-)
Cheers,
Matthias
Am 19.08.2015 um 21:52 schrieb Magnus Danielson:
Dear Mathias,
On 08/19/2015 06:40 PM, Matthias Jelen w
Hello,
I´ve got a question concerning ADEV-measurements.
I´m measuring the 15 MHz output of a KS-24361 with my SR-620
with it´s internal (Wenzel) OCXO using Timelab. For the
first shot I used the counters frequency mode with 1s
gatetime. ADEV at tau=1s turned out to be arounf 2E-11,
which fi
Hello Time-Nuts,
I have a RFTG-U REF-0 / REF-1 pair here which seems to have a problem.
The error LED of the REF-1 box stays on forever, and Ulrichs SW reports
an EFC Error. After OCXO warmup, the EFC goes doen to it´s lower rail
(-100 %) and stays there forever.
Indeed the 5 MHz Output from
Chris,
did you allready get your photos?
If not, I can open up mine tonight and see if I can make
some shots under the microscope...
73,
Matthias, DK4YJ
Hi Everyone,
Thanks for the suggestions this past weekend for helping get my new Thunderbolt
fixed. I got back into town last night lat
Hi Bob,
I also grabbed some of the KS-24361 pairs and retrieved a
lot of information from the mailng list archive.
If you have more results from the reverse engineering which
was already done, I´d also be very interested.
Thanks,
Matthias
Hi
You need to get the Oncore running with the c
. Other coax delays are used in
the oscillator turnoff and mixer logic.
But there are all kinds of gates to control the system and Flip Flop used
as a mixer. Not easy to deal with.
Regards
Paul.
On Sat, Jul 4, 2015 at 1:44 PM, Matthias Jelen
wrote:
Dear Time-Nuts,
I´m still struggling to get my
Dear Time-Nuts,
I´m still struggling to get my 5370A to work reliable again.
It keeps showing error 04.
Sometimes it is working without any problems for hours,
sometimes it´s a matter of minutes until the error is
displayed, and sometimes I doesn´t come up without the error
at all. I don´t
Dear Time-Nuts,
I played around with my SR-620 counter and TimeLab and got
strange ADEV curves, so I started to investigate a bit.
The SR-620 is equipped with Option 1, the high performance
Wenzel OCXO - specified with 5E-12 at tau = 1s.
I tried to evaluate the counters noisefloor. I fed 10 M
x27;t running, which resulted in overheating.
I hope this helps.
Regards, John K1AE
-Original Message-
From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Matthias Jelen
Sent: Monday, June 08, 2015 9:28 AM
To: time-nuts@febo.com; dk...@gmx.de
Subject: [time-nuts] HP5370 Err
Hello!
I´ve got a question to the 5370 experts on the list.
I just received my new (old...) HP5370a. It performed fine for abt. one hour,
then it started to display error 04 which means "PLL out of lock".
A look in the service manual revealed that there are several reasons for this.
I chec
Hi Pete,
I didn´t test the transition - I just entered a few dates
well after the rollover. After locking, the phase of the 10
MHz output was stable against the phase of the 10 MHz REF
out of the signal generator I used for testing, which was
what I expected. The 1 PPS looked "reasonable".
(who wrote LH, and is on the list) to add the 936 week offset
back into the timestamps for dates after July 2017.
/tvb
- Original Message -----
From: "Matthias Jelen"
To:
Sent: Tuesday, September 16, 2014 12:06 PM
Subject: [time-nuts] Thunderbolt Rollover
Hello,
I got a Trimb
Hello,
I got a Trimble Thunderbolt a few months ago and implemented
a simple monitor on a MCU to display time, no of satellites
etc. on a lcd display.
While working on this, I found the hint for the upcoming
rollover in 2017 in the user manual. I couldn?t find any
details on this in the intern
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
31 matches
Mail list logo