Gentleman,
Here are the commands I have found on the Chong Ho aka Samsung GCRU-D GPSDO.
This is a very capable reference from the CDMA era.
The GPSDO uses a subset of the Symmetricom scpi commands.
Most interestingly there is a debug mode.
I will follow up with interfacing to the unit and mod
Hi All,
This is my first 5370B so I knew nothing about its expected behaviour.
I bought it on eBay as the song goes and when it arrived I could see damage
to the top right corner of the front frame that the operator panel screws
into.
It looked like it had been dropped and dropped quite hard.
nters
> that can also measure frequency. Frequency is not their best feature.
>
> -Chuck Harris
>
> marks twotoe.com wrote:
>> Could someone confirm if this behaviour is normal on a 5370B.
>>
>> When measuring the output of my standard the 10th and 11th digits are
>
Could someone confirm if this behaviour is normal on a 5370B.
When measuring the output of my standard the 10th and 11th digits are
constantly changing.
Do I need a 10Mhz low pass filter on the input of the counter to get an
accurate result or should I just ignore this behaviour?
Many thnaks,
Dear Timelords,
RE: "I have 2 ways of recovering my only reference. The first is reflash
the chip with a binary image. The second is upload the hex image through the
serial port. I have neither image."
No one has been forthcoming with assistance from this group.
Through other channels I have
); SAEximRunCond expanded to false
Errors-To: [EMAIL PROTECTED] RETRY
Nigel,
I have found a pdf copy of the Manual with full schematics for the ABC
including optuion 5.
If you still require it, let me know where I can send it?
Now I am keen to get my 3336 going and I am after the ROM images f
Hi All,
I have a Reeves Hoffman 101BC precision OCXO.
It is a 10 Mhz one.
I am trying to GPSD it.
However EFC adj pot (10k) only goes to the pin with no reference voltage.
Can I still control this ocxo in the same manner as the HP ovens such as the
10544?
Mark
_