No master oscillator. Complete and untested otherwise. has counter to 512MHz.
GPIB. 35$ plus shipping
73 de Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and
Hi,
Datum TS-2100 (gps disciplined oscillator) tymserver working has ethernet and
simple addressing via a front panel interface.
350 US plus packing shipping and fees. Oh, buy it and I'll throw in an HP
antenna with homebrew mount.
73 de Norm n3ykf
Hi,
Datum TS-2100 (gps disciplined oscillator) tymserver working has ethernet and
simple addressing via a front panel interface.
350 US plus packing shipping and fees. Oh, buy it and I'll throw in an HP
antenna with homebrew mount.
73 de Norm n3ykf
This is not a mini ebay. It is a straight for sale listing.
Any issues pm the moderator. In other words: Take it off the list.
73 de Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
parts unit. complete. make me an offer.
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Hi all,
I have 4 5328a's all have ch c to 512 MHz and the extended triggering along
with gpib.
25 plus shipping from 18840
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Parts only. Unit is complete. Has agc problem.
100$ plus shipping from 18840 or best offer.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions
Parts only. Unit is complete. Has agc problem.
100$ plus shipping from 18840 or best offer.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions
Robert,
You completely and utterly rock.
I built mine in an old scsi enclosure. Looks nice. Used Solidworks for the
front panel. Didn't have my mill at the time.
What type of cnc are you using? Mill?
Have fun and don't break anything.
Norm n3ykf
___
$400 Plus shipping. Working without any problems.
Questions or pics, drop me a note.
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions
Hi,
I am selling my HP 5372a due to lack of use. It passes all self checks.
Asking 600 or best offer plus shipping from 18840.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Hi all!
My 5087a is for sale 600 or best offer.
Has all 10 MHz outputs
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Hi all,
For sale is my Datum TS 2100. 450 or best offer. Works fine with no problems.
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions
Hi all!
Up for sale are two Datum 9390's $40 a piece. One is newer than the other. Both
have the gps rollover problem.
FOB from 18840
73 de Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Hi,
Have a working 3586c for sale. 250$ or best offer. Has 50 Ohm input on front
panel.
Thanks,
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow
Hi,
Have a working 3586c for sale. 250$ or best offer. Has 50 Ohm input on front
panel.
Thanks,
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow
Don,
Sold in the first 30 seconds. Wish I had the rest of the truckload that was at
the hamfest.
73 de Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow
Hi,
I am selling my HP 5372a due to lack of use. It passes all self checks. Asking
650 plus shipping from 18840.
Have a bunch of things I'll be listing over the next day or so. Wife decrees
stuff must go.
Norm n3ykf
___
time-nuts mailing list --
Hi all!
This unit for repair only. Looking at it's master oscillator, it shows 10 MHz.
The period is 100 ns. BUT the TI is wrong. No time to play with this. $200 or
best offer plus shipping.
Thanks,
Norm n3ykf
___
time-nuts mailing list --
Bert,
I've got a 5372a and am looking to pass it on to a new owner. It does work.
First, the bad. Has minor screen burn. Also someone took and used a sharpie on
it's face. Not too obnoxious.
Good: Last time I played with it, it passed the HP operator's check. Will do it
again if you're
Pete,
5u: 50lbs or so. Not sure on the physical dims but can check when I get home.
Have fun! That instrument is a pain in the ass to set up.
TI on the 5370a: Simple
TI on the 5372a: complex setup. Good news is that you have control of
everything. Bad news is that you have to specify everything.
Pete,
5u: 50lbs or so. Not sure on the physical dims but can check when I get home.
Have fun! That instrument is a pain in the ass to set up.
TI on the 5370a: Simple
TI on the 5372a: complex setup. Good news is that you have control of
everything. Bad news is that you have to specify everything.
Skip,
Is it sending moto bin or nmea?
Try switching. Easy to find.
Try asking the board it's ID.
Fun with old gps's
Norm
Skip Withrow swith...@idcomm.com wrote:
Hello fellow nuts,
I am trying to communicate with a Motorola UT+ receiver. Used to do it with
the Motorola GPS software
Hi all!!
If you don't know a mainspring from an escapement, watch this video.
I was wondering about the physics of the hairspring, jewel pin and
escapement/pallete arm.
Cool stuff.
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To
http://www.youtube.com/watch?v=OiCPu0SjEW4
OHH!!! If I didn't find electronics so fascinating, I'd be going to
school for an ME degree rather than an EE..
David Smith w...@msn.com wrote:
Norm, the link was stripped out of your message. Please send it to me
directly.
Said,
Thanks!! I found that after a while fishing around in the manual. Synergy used
to be able to flash the M12+t to an a positioning receiver which does support
nmea.
Bad news is that all of the oncores that I have are of a firmware that doesn't
support nmea, either.
Perusing the manual
Mike,
It would still output data at 9600 moto bin(after sending @@Ci). I also tried
successfully to turn on the Hn string.
I'm doing something wrong, or there is something I'm not doing right..
Thanks
Norm
mike cook mike.c...@orange.fr wrote:
Hi Norm,
hmm. doc says that the command willl
Mike,
It would still output data at 9600 moto bin(after sending @@Ci). I also tried
successfully to turn on the Hn string.
I'm doing something wrong, or there is something I'm not doing right..
Thanks
Norm
mike cook mike.c...@orange.fr wrote:
Hi Norm,
hmm. doc says that the command willl
Bob,
I used Labview to see exactly what was being sent in hex. Been there, done
that. Playing with hex on a serial bus can be aggravating.
BTW: there are a few good terminal programs that will let you do the hex thing
and translate the output. Good for setting up a receiver.
Have fun,
Norm
Bob,
I used Labview to see exactly what was being sent in hex. Been there, done
that. Playing with hex on a serial bus can be aggravating.
BTW: there are a few good terminal programs that will let you do the hex thing
and translate the output. Good for setting up a receiver.
Have fun,
Norm
Hi all!!
Not all oncores are created the same. I THINK (based on inference)that some of
the GT+ receivers don't support nmea. Bad luck on my part to get those. BTW:
M12+t's don't support nmea, either.
I queried the gps id from the board, and noted when I tried to send @@ci from
tac32 that it
Ralph,
Just chatted with a fellow at Lockheed's project Blue Horizon. He said that all
of the Garmin hockey pucks (rx+ant) they tested do work above 60kft.
The biggest issue is firmware ver. As I found out to my dismay. Not all have
the same features.
Thanks for the input,
Norm n3ykf
Ralph
Didier et al:
Please accept my most profound apologies!!! Dyslexia strikes again!!
Norm n3ykf
Didier Juges did...@cox.net wrote:
I found it, it was uploaded as 5078 and I blissfully saved it under that
name, I am fixing it :)
Didier KO4BB
-Original Message-
From:
Didier et al:
Please accept my most profound apologies!!! Dyslexia strikes again!!
Norm n3ykf
Didier Juges did...@cox.net wrote:
I found it, it was uploaded as 5078 and I blissfully saved it under that
name, I am fixing it :)
Didier KO4BB
-Original Message-
From:
Paul,
Check with ko4bb. If you'd like, I'll send you a copy in pieces. What's your
isp's attachment size limit.
Norm n3ykf
paul swed paulsw...@gmail.com wrote:
Did not seem to find it???
On Tue, May 18, 2010 at 11:54 PM, normn3...@stny.rr.com wrote:
Hi all!
Just uploaded the 5087a
Hi all!
Just uploaded the 5087a manual to ko4bb's site. Bad news is it's 50mb. Good
news is that you can read the schematics. Colleen enthusiastically scanned the
wide pages for me at the highest res.
Norm n3ykf
___
time-nuts mailing list --
Hi!
Wanted:
HP 8555a or 8559a plugins.
Drop me a note with condition and location. Pics would be helpful!
Will consider entire packages.
Thanks,
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Bob,
I'm in Sayre, PA and will drive.
Thanks,
Norm n3ykf
Bob Camp li...@rtty.us wrote:
Hi
Are you still in 3 land? If so, I may have some of what you are looking for
over in the shed. If I do, the price is right (as in free), but I have no
desire to ship big heavy spectrum analyzers...
Who is headed to Dayton??
Any vendors with junk?
cu there! 73 de Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Ernie,
It's a 26 conductor cable.
Thanks,
Norm
erniepe...@aol.com wrote:
Hi Norm,
This pretty ugly flat ribbon connector has 26 pins?? or just a 20
pins
Rgds Ernie.
-Original Message-
From: normn3...@stny.rr.com
To: Discussion of precise
Hi all!
Do any of you OT's have manuals stashed? Particularly interested in pinouts.
Has a pretty ugly flat ribbon connector. Want to use these for aprs and such.
Thanks,
Norm n3ykf
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go
Bob,
Easy fix!! Soft keys only. Did need to rig up a battery to keep the chip alive,
though.
73 de Norm n3ykf
Bob Camp li...@rtty.us wrote:
Hi
Exactly what does the error message:
Error 160 out of sensitivity cal
really mean?
There seem to be a lot of boxes out there that have
42 matches
Mail list logo