Morris,
Hg is a liquid at room temperature. It evaporates into gaseous Hg. It
"disappears" from all these little reservoirs. So there is no chance of long
term Hg build up on floors in medical facilities. Here's an experiment we did
as children. Apply a small amount of Hg to a silver coin.
Watkins Johnson produced some excellent microwave oscillators, but their
microwave division was sold and resold about a decade ago. Product information
is difficult to find.
I need pin out, product data and/or a link for two of their oscillators.
WJ-5133-3
WJ-5908-79
Thanks,
Stork
I bought an inexpensive USB to rs232 adapter from Y Liu on ebay. It works
great.
Stork
> > Try logging the positions to a PDA or normal computer. Look at the values.
> > How much do they wander? Compare with the positions from the Oncore in the
> > GPSDO. This will give you a much better unders
2-17-07
VP Oncore Engineering notes under product specification Characteristics of
receiver architecture has a listing of
L1 - 1572.42 Mhz.
Is anyone knowledgable as to the take off point of this frequency on the PCB?
Thanks,
Stork
1. Product Specifications
VP ONCORE GPS Receiver Techn
Hello,
I purchased one of the HP 10811-60155 standards on ebay one month ago and it
was just delivered today. Seller promised to send edge connector and pinouts,
but now refuses to send pinout and another item. I am unable to test the
standard.
This has been a difficult transaction and I wis
A bunch of new LUCENT RFTG-m-RB listed on ebay. What's the bottom line? Are
they or are they not GPS disiplined?
Stork
___
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
12-18-06
Is it possible to lock a 10ghz gunn diode transceiver (supply voltage 10.00
vdc) to a 10 mhz standard? Signal applied to either gunn diode or varactor
supply voltages.
Rick
___
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com
Sorry, I forgot to provide a subject in last post.
-- Forwarded Message: --
From: [EMAIL PROTECTED]
To: time-nuts@febo.com
Date: Fri, 10 Nov 2006 18:10:05 +
> Hi,
>
> I'm a new list member. I'm also very new to timing and synchronization.
>
> I am looking for a stand
Hi,
I'm a new list member. I'm also very new to timing and synchronization.
I am looking for a standard to lock a 10 GHz gunnplexer to. I am an amateur
experimenter and by necessity must do things inexpensively. I am looking at a
Symmetricon rubidium atomic clock standard on ebay now. The s