Thank you, Didier.
I had a quick look the manual looks the same as the one on the website
of Beuce.
Best regards, Jeroen
Didier Juges wrote:
The 5370A (and B) service manual is also at www.ko4bb.com/ham_radio/Manuals
Didier KO4BB
Jeroen Bastemeijer [EMAIL PROTECTED] wrote:
Dear
Good luck with your 5370! Both my units have the bad socket syndrom,
and it is getting to the point where I have pretty much decided to
replace all the sockets.
Many years ago, I worked on a system full of chips in sockets and the
associated reliability problems. Standard prototype stuff.
Didier Juges wrote:
Well, one thing for sure, in both my units, the chips are not anywhere near
ready to fall off. I need a crow bar to
take them out...
Same thing with the PWBs themselves, the card edge connectors are extremely
tight, that's one reason I am puzzled by
the problems,
Hi Chuck,
Thanks for the tip. That's got to be the problem. I will take the CPU card out
of the worst offender tonight and look under the magnifier.
Didier KO4BB
Chuck Harris [EMAIL PROTECTED] wrote:
Didier Juges wrote:
Well, one thing for sure, in both my units, the chips are not
Dear All,
I have problems accessing the 5370A manual on the Agilent website?!
Accessing the 5370B manual is nor problem. Any suggestions?
Thanks, Jeroen
--
Ing. Jeroen Bastemeijer
Delft University of Technology
Department of Electrical Engineering
Electronic Instrumentation Laboratory
Jeroen Bastemeijer wrote:
Dear All,
I have problems accessing the 5370A manual on the Agilent website?!
Accessing the 5370B manual is nor problem. Any suggestions?
Thanks, Jeroen
Jeroen
Try
http://www.g8wrb.org/data/HP/HP5370A.pdf
Bruce
Bruce,
Thank you!
Best regards, Jeroen
Dr Bruce Griffiths wrote:
Jeroen Bastemeijer wrote:
Dear All,
I have problems accessing the 5370A manual on the Agilent website?!
Accessing the 5370B manual is nor problem. Any suggestions?
Thanks, Jeroen
Jeroen
Try
The 5370A (and B) service manual is also at www.ko4bb.com/ham_radio/Manuals
Didier KO4BB
Jeroen Bastemeijer [EMAIL PROTECTED] wrote:
Dear All,
I have problems accessing the 5370A manual on the Agilent website?!
Accessing the 5370B manual is nor problem. Any suggestions?
Thanks,