I've downloaded NI-VISA and got that working I probably don't
need to download tek-VISA.
Best Regards,
James
-Original Message-
From: Bill Byrom
To: time-nuts
Sent: Sun, 22 Mar 2015 20:28
Subject: Re: [time-nuts] ADEV noise floor vs counter gate time
Was the website pr
ctly so has forwarded my
> case to Tek IT.
>
> I intend repeating my TTi TF930 experiment with my FCA3100 when I've got
> everything working ok and am looking forward to seeing the results.
>
> James
>
>
>
>
>
>
>
> -Original Message
en I've got
everything working ok and am looking forward to seeing the results.
James
-Original Message-
From: Bill Byrom
To: time-nuts
Sent: Sun, 22 Mar 2015 2:27
Subject: Re: [time-nuts] ADEV noise floor vs counter gate time
Hi, James. I'm a Tektronix RF Application E
en the two - hence my
> puzzlement.
>
> The fca3100 calculates ADEV directly so I'll have a check on my code.
>
> James
>
>
>
>
>
>
>
> -----Original Message----- From: Dave Martindale
> To: jpbridge
> CC: Discussion of precise time and frequency meas
Martindale
To: jpbridge
CC: Discussion of precise time and frequency measurement
Sent: Wed, 18 Mar 2015 15:22
Subject: Re: [time-nuts] ADEV noise floor vs counter gate time
The counter always has a 1 count uncertainty in the timebase measurement, which
is a 2e-8 error with a 1 second gate ti
bottom of this if only to understand my counter
> better.
>
> James
>
>
>
>
>
>
>
> -Original Message-
> From: Dave Martindale
> To: jpbridge ; time-nuts
> Sent: Wed, 18 Mar 2015 1:26
> Subject: Re: [time-nuts] ADEV noise floor vs counter gate t
o understand my counter better.
James
-Original Message-
From: Dave Martindale
To: jpbridge ; time-nuts
Sent: Wed, 18 Mar 2015 1:26
Subject: Re: [time-nuts] ADEV noise floor vs counter gate time
I believe I see the pattern. As you figured out, you wouldn't expect a si
#x27;ve worked out how to program it).
James
-Original Message-
From: Dave Martindale
To: jpbridge ; Discussion of precise time and frequency
measurement
Sent: Tue, 17 Mar 2015 0:27
Subject: Re: [time-nuts] ADEV noise floor vs counter gate time
How is the counter configured? A
) and that should give
something to compare (once I've worked out how to program it).
James
-Original Message-
From: Dave Martindale
To: jpbridge ; Discussion of precise time and frequency
measurement
Sent: Tue, 17 Mar 2015 0:27
Subject: Re: [time-nuts] ADEV noise floor vs count
How is the counter configured? Are you reading period or frequency? Are
you in "E?" (Every Result) mode, or "C?" (Continuous Result) mode? The
former should give you continuous but independent measurements, while the
latter gives heavily overlapped measurements. (For example, with a 100
second
10 matches
Mail list logo