Hi Miles;
Thanks for the paper. Craig is actually the one taking the lead on this
project. I will keep the group updated on the project.
Thomas Knox
> From: jmi...@pop.net
> To: time-nuts@febo.com
> Date: Sat, 30 Mar 2013 16:10:21 -0700
> Subject: Re: [time-nuts] Building a A
013 4:10 PM
> To: 'Discussion of precise time and frequency measurement'
> Subject: Re: [time-nuts] Building a Agilent Cross Correlated Phase Noise
> Measurement System.
>
> Hi, Tom --
>
> A paper in the 2010 EFTF described the use of a pair of 11848A boxes from
>
Message-
> From: time-nuts-boun...@febo.com [mailto:time-nuts-
> boun...@febo.com] On Behalf Of Tom Knox
> Sent: Saturday, March 30, 2013 10:17 AM
> To: Time-Nuts
> Subject: [time-nuts] Building a Agilent Cross Correlated Phase Noise
> Measurement System.
>
> We are looking
Hi Tom:
I work for Agilent. Have you asked your Agilent support engineer
about this? There is some internal work going on in Agilent
involving cross correlation. The guy doing it had to get access
to source code. I'm not sure if there is a solution available
for customers, but I would like to
We are looking into using two N/E550XA/B Phase Noise systems and the 89410A to
build a Cross Correlated measurement system.
I was wondering if anyone has attempted this before? Does anyone know where to
find the base GPIB command codes for the 70420A system?
Thanks;
Thomas Knox
Phase Noise Mea
