Fixed outputs 10,5,1 Mhz and 100Khz
selectable 1,10,100 Hz, 1,10,100Khz
Stanley
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Good evening Bob,
That is a nice chassis. I have a large box set aside for the David
Partridge board.
Thanks for the info on the BCD switch.
I found a power supply at Marlin P Jones (www.mpja.com) that is very small
and appears to fit the bill.
Part number 17635-PS at a very reasonable cos
Robert,
You completely and utterly rock.
I built mine in an old scsi enclosure. Looks nice. Used Solidworks for the
front panel. Didn't have my mill at the time.
What type of cnc are you using? Mill?
Have fun and don't break anything.
Norm n3ykf
___
ti
Hi guys,
I built a nice little chassis for David's divider board and documented it
a bit. If interested, please have a look here:
http://www.nerdhouse.org/projects/frequency_divider
Have fun,
Bob, N3XKB
___
time-nuts mailing list -- time-nuts@febo.c
