Eds
Right I did see it used to turn square waves into sine waves. I will have
to try that.
But I am very happy with it even as a simple transformer. Thats what
surprised me something that goes nicely all the way down below 60 KHz. I
have to tell you I have been using lots of things that I have foun
On 12/14/14, 10:41 AM, paul swed wrote:
Well with zero effort the spec sheet. Bob indeed there are common mode
chokes in them. Jeeze a lot in 1 package along with center taps.
Regards
Paul
WB8TSL
I've seen a lot of MiniCircuits BNC 10.7 MHz BPFs used in equipment
racks over the years as a so
ed was surplus 16way 10BaseT switches which
>> were junked some time back but may still be lying in the back of store-room
>> cupboards.you get a lot on one board that way.
>>>
>>> Alan
>>> G3NYK
>>>
>>> - Original Message - From: &q
ere junked some time back but may still be lying in the back of store-room
> cupboards.you get a lot on one board that way.
> >
> > Alan
> > G3NYK
> >
> > - Original Message - From: "paul swed"
> > To: "Time-nuts"
> > Sen
ay still be lying in the back of store-room
> cupboards.you get a lot on one board that way.
>
> Alan
> G3NYK
>
> - Original Message - From: "paul swed"
> To: "Time-nuts"
> Sent: Sunday, December 14, 2014 4:18 PM
> Subject: [time-nuts]
ginal Message -
From: "paul swed"
To: "Time-nuts"
Sent: Sunday, December 14, 2014 4:18 PM
Subject: [time-nuts] Frequency distribution isolation transformers
YCL20F001n arrived
Another Time-nut suggested the use of 10 baseT ethernet transformers for
10
MHz isolati