Re: [time-nuts] GPS Distribution amplifier

On Mon, August 14, 2006 22:02, Tom Van Baak said: >> In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for > this) > > Magnus, > > Over the years I've picked up all mine on eBay; good > ones by HP/Agilent, or Symmetricom. GPS Networking and GPS Source are also makers of good one

Re: [time-nuts] GPS Distribution amplifier

ince May with no takers. I was thinking of putting up a FOL-100 fiber optic antenna link, with fiber and connector. Jack -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Van Baak Sent: Monday, August 14, 2006 3:03 PM To: Discussion of precise

Re: [time-nuts] GPS Distribution amplifier

For anyone interested the data sheets for the HP 58516A L1 Distribution Amplifier and 58532A L1 Antenna are available at www.to-way.com Best Regards, Hadley, K7MLR At 10:02 PM 8/14/2006, you wrote: > > > The PCB is the same for both models. > > > > > > It is easy to convert these to take DC

Re: [time-nuts] GPS Distribution amplifier

> > The PCB is the same for both models. > > > > It is easy to convert these to take DC on port 1, if you are > > comfortable with SMT soldering. I don't recall the exact > > details, but I found it fairly obvious. > Did you have to remove the circuit board from the > metal housing to make th

Re: [time-nuts] GPS Distribution amplifier

A 50nF Cap should do just fine. Little smaller/bigger probably ok as well. Size? A small ceramic should be fine. After all we are not expecting KW. Hmmm... I wonder what the power output of a GPS sat is? Is that classified? Even if it is, if I know it's height I can probably figure it out. Estima

Re: [time-nuts] GPS Distribution amplifier

--- xaos <[EMAIL PROTECTED]> wrote: > 8-way splitters > Make sure it passes DC. Your antenna will need it. > Pass the DC from one port and block it from all others. What size, type block? /b __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the

Re: [time-nuts] GPS Distribution amplifier

I did eventually get an SMC connector. However, I may take a look at converting it later, to eliminate the extra 5V supply. Did you have to remove the circuit board from the metal housing to make the mod? If so, that would make it much more difficult. > The PCB is the same for both models. > >

Re: [time-nuts] GPS Distribution amplifier

> I picked up an HP 58516A (four-port) on ebay last year, very cheaply. I > didn't need four ports, but the price was right. > > Magnus, you probably already know this, but just in case you don't, I'll > mention it. Those HP splitters come in two varieties. On one, the 5VDC is > fed into port

Re: [time-nuts] GPS Distribution amplifier

From: "Tom Van Baak" <[EMAIL PROTECTED]> Subject: Re: [time-nuts] GPS Distribution amplifier Date: Mon, 14 Aug 2006 13:02:58 -0700 Message-ID: <[EMAIL PROTECTED]> > > In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for > this) > > M

Re: [time-nuts] GPS Distribution amplifier

) and I had trouble > finding the mating connector. > > - Original Message - > From: "Glenn" <[EMAIL PROTECTED]> > To: "Discussion of precise time and frequency measurement" > > Sent: Monday, August 14, 2006 1:42 PM > Subject: Re: [time-nut

Re: [time-nuts] GPS Distribution amplifier

> In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for > this) Actually, it might be if you're not too concerned about phase noise. I've used video distribution DAs in the past with good results, but they're limited to locking purposes only. Paul ___

Re: [time-nuts] GPS Distribution amplifier

> In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for this) Magnus, Over the years I've picked up all mine on eBay; good ones by HP/Agilent, or Symmetricom. Ignore the high fixed-priced sellers; if you're patient you can get them for as little as $10 to $20 per port. Many of

Re: [time-nuts] GPS Distribution amplifier

asurement" Sent: Monday, August 14, 2006 1:42 PM Subject: Re: [time-nuts] GPS Distribution amplifier > Magnus Danielson wrote: > >>In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for >>this) >> >> > > Good or not, there are a fe

Re: [time-nuts] GPS Distribution amplifier

In message: <[EMAIL PROTECTED]> "Poul-Henning Kamp" <[EMAIL PROTECTED]> writes: : In message <[EMAIL PROTECTED]>, Magnus Danielson wri : tes: : >Hi! : > : >In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for this) : : If you only need two outlets you can just do a

Re: [time-nuts] GPS Distribution amplifier

Hi Magnus: I use satellite splitters and amps for GPS, see: http://www.pacificsites.com/~brooke/4GPS.shtml Have Fun, Brooke Clarke -- w/Java http://www.PRC68.com w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml http://www.precisionclock.com Magnus Danielson wrote: >Hi! > >In nee

Re: [time-nuts] GPS Distribution amplifier

Magnus Danielson wrote: >In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for this) > > Good or not, there are a few HP Agilent 58535A GPS Distribution Amplifier

Re: [time-nuts] GPS Distribution amplifier

In message <[EMAIL PROTECTED]>, Magnus Danielson wri tes: >Hi! > >In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for this) If you only need two outlets you can just do a passive splitter, you need a tiny capacitor in series with the center wire on one of them and a resister t

[time-nuts] GPS Distribution amplifier

Hi! In need of a GPS distribution amplifier. Any ideas? (Ebay isn't good for this) Cheers, Magnus ___ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts